# How To Configure Tomcat

## Introduction

WebGoat comes with default configurations for Tomcat. This page will explain these configurations and other possible configurations for Tomcat. This is just a short description which should be enough in most cases. For more advanced tasks please refer to the Tomcat documentation. Please note that all solutions are written for the standard configurations on port 80. If you use another port you have to adjust the solution to your configuration.

## The Standard Configurations

There are two standard Tomcat configurations. In the basic configurations you use the server on your localhost. Both are identically with the only difference that in one tomcat is running on port 80 and 443 (SSL) and in the other tomcat is running on port 8080 and 8443. In Linux you have to start WebGoat as root or with sudo if you want to run it on port 80 and 443. As running software as root is dangerous we strongly advice to use the port 8080 and 8443. In Windows you can run WebGoat.bat to run it on port 80 and WebGoat_8080.bat to run it on port 8080. In Linux you can use webgoat.sh and run it with webgoat.sh start80 or webgoat.sh start8080. The user in these configurations is guest with password guest

## Server Configurations

If you are a single user of WebGoat the standard configurations should be enough but if you want to use WebGoat in laboratory or in class there might be the need to change the configurations. Before changing the configurations we recommend doing a backup of the files you change.

### Change Ports

To change the ports open the server_80.xml which you find in tomcat/conf and change the non-SSL port. If you want to use it on port 8079 for example:

    	<!-- Define a non-SSL HTTP/1.1 Connector on port 8079 -->
    	<Connector address="127.0.0.1" port="8079"...

You can also change the SSL connector to another port of course. In this example to port 8442:

    	<!-- Define a SSL HTTP/1.1 Connector on port 8442 -->
    	<Connector address="127.0.0.1" port="8442"...

### Make WebGoat Reachable From Another Client

THIS MAKES IT POSSIBLE TO REALLY ATTACK YOUR SERVER! DO NOT DO THIS UNTIL YOU KNOW WHAT YOU ARE DOING. THIS CONFIGURATION SHOULD BE ONLY USED IN SAFE NETWORKS!

By its default configurations WebGoat is only reachable within the localhost. In a laboratory or a class there is maybe the need of having a server and a few clients. In this case it is possible to make WebGoat reachable.

The reason why WebGoat is only reachable within the localhost is the parameter address in the connectors for the non-SSL and SSL connection in server_80.xml. It is set to 127.0.0.1. The applications only listens on the port of this address for incoming connections if it is set. If you remove this parameter the server listens on all IPs on the specific port.

### Permit Only Certain Clients Connection

If you have made WebGoat reachable it is reachable for all clients. If you want to make it reachable only for certain clients specified by there IP you can archive this by using a 'Remote Address Filter'. The filter can be set in a whitebox or blackbox approach. Here is only discussed the whitebox approach. You have to add following lines to the Host section of web_80.xml:

    	<Valve className="org.apache.catalina.valves.RemoteAddrValve"
    	allow="127.0.0.1,ip1,ip2"/>

In this case only localhost, ip1 and ip2 are permitted to connect.

## Configuring new WebGoat users

WebGoat uses spring-security.xml to configure users.

        <!-- Authentication Manager -->
        <authentication-manager alias="authenticationManager">
            <authentication-provider>
                <user-service>
                    <!-- TODO: credentials in the config - this isn't something I'm proud of - get rid of this ASAP -->
                    <user name="guest" password="guest" authorities="ROLE_WEBGOAT_USER" />
                    <user name="webgoat" password="webgoat" authorities="ROLE_WEBGOAT_ADMIN" />
                    <user name="server" password="server" authorities="ROLE_SERVER_ADMIN" />
                </user-service>
            </authentication-provider>
        </authentication-manager>

## Adding Users

Usually using WebGoat you just use the user guest with the password guest. But maybe in laboratory you have made a setup with one server and a lot of clients. In this case you might want to have a user for every client and you have to alter /WEB-INF/spring-security.xml as the users are stored there. We recommend not to use real passwords as the passwords are stored in plain text in this file!

### Add User

Adding a user is straight forward. You can use the guest entry as an example. The added users should have the same role as the guest user. The new user/password will not show on the login page. Add lines like this to the file:

                    <user name="guest2" password="guest2" authorities="ROLE_WEBGOAT_USER" />
    	...