//**************************************************************************
//	File Name:	IPRoute_02.MOF
//	Author:		mthatch
//	Date:		03/07/00
//	Comments:	Split this out into more classes following conversation with 
//				Dennis Harding.  Done to accomodate more that just IP4
//
//	Mod/Date:	
//		000315	Re-assembled back into single class and renamed to be IP4 
//				specific.  Removed all non relevent properties.  The clarified
//				goal here being to replicate 'route print' command. not more.
//		000405	Added Event class
//				
//**************************************************************************


class Win32_IP4RouteTableEvent : __ExtrinsicEvent
{
} ;


//**************************************************************************
//* Class: Win32_IP4RouteTable
//* Derived from : CIM_LogicalElement
//**************************************************************************

	[dynamic, provider("RouteProvider"), Description ("The IP4RouteTable class "
	"information governs where network data packets are routed to (e.g. usually "
	"internet packets are sent to a gateway, and local packets may be routed "
	"directly by the client's machine).  Administrators can use this "
	"information to trace problems associated with misrouted packets, and also "
	"direct a computer to a new gateway as necessary.This class deals specifically "
	"with IP4 and does not address IPX or IP6. It is only intended to model the "
	"information revealed when typing the 'Route Print' command from the command "
	"prompt."), 
	Locale (0x409), UUID ("{}")]
class Win32_IP4RouteTable : CIM_LogicalElement
{
		[read,write,key, Description ("The Destination property contains the "
		"destination IP address for this route.")
		] 
	string Destination;

		[read,write, Description ("The Mask property contains the mask used "
		"in this entry. Masks should be logical-ANDed with the destination "
		"address before being compared to the value in the ipRouteDest field.")
		]
	string Mask;

		[read, write, Description ("The InterfaceIndex property contains the "
		"index value that uniquely identifies the local interface through which "
		"the next hop of this route should be reached.")
		]
	sint32 InterfaceIndex ;

		[read, write, Description ("The NextHop property contains the IP address "
		"of the next hop of this route. (In the case of a route bound to an "
		"interface that is realized via a broadcast media, the value of this "
		"field is the agent's IP address on that interface.).")
		]
	string NextHop ;

		[read,write, Description ("The Type property reveals the type of route. "
		"The values direct(3) and indirect(4) refer to the notion of direct and "
		"indirect routing in the IP architecture. Setting this object to the "
		"value invalid(2) has the effect of invalidating the corresponding entry "
		"in the RouteTable object. That is, it effectively disassociates the "
		"destination identified with said entry from the route identified with "
		"said entry. It is an implementation-specific matter as to whether the "
		"agent removes an invalidated entry from the table. Accordingly, "
		"management stations must be prepared to receive tabular information "
		"from agents that corresponds to entries not currently in use. Proper "
		"interpretation of such entries requires examination of the relevant "
		"ipRouteType object."),
		ValueMap{"1","2","3","4"},
		Values{"other" , "invalid","direct","indirect"}
		]
	uint32 Type;

		[read, Description ("The Protocol property reveals the routing mechanism "
		"via which this route was learned. Inclusion of values for gateway routing "
		"protocols is not intended to imply that hosts must support those "
		"protocols."),
		ValueMap{"1","2","3","4","5","6","7","8","9","10","11","12","13","14"},
		Values{"other","local","netmgmt","icmp","egp","ggp","hello","rip",
		"is-is","es-is","ciscoIgrp","bbnSpfIgp","ospf","bgp"}
		]
	uint32 Protocol;

		[read,write, Description ("The Age property contains the number of seconds "
		"since this route was last updated or otherwise determined to be correct. "
		"No semantics of 'too old' can be implied except through knowledge of the "
		"routing protocol by which the route was learned.")
		] 
	sint32 Age;

		[read, write, Description ("The Metric1 property contains the primary "
		"routing metric for this route. The semantics of this metric are "
		"determined by the routing protocol specified in the route's ipRouteProto "
		"value. If this metric is not used, its value should be set to -1.")
		]
	sint32 Metric1 ;

		[read, write, Description ("The Metric2 property contains an alternate "
		"routing metric for this route. The semantics of this metric are "
		"determined by the routing protocol specified in the route's "
		"ipRouteProto value. If this metric is not used, its value should be "
		"set to -1.")
		]
	sint32 Metric2 ;

		[read, write, Description ("The Metric3 property contains an alternate "
		"routing metric for this route. The semantics of this metric are "
		"determined by the routing protocol specified in the route's "
		"ipRouteProto value. If this metric is not used, its value should be "
		"set to -1.")
		] 
	sint32 Metric3 ;

		[read, write, Description ("The Metric4 property contains an alternate "
		"routing metric for this route. The semantics of this metric are "
		"determined by the routing protocol specified in the route's "
		"ipRouteProto value. If this metric is not used, its value should be "
		"set to -1.")
		]
	sint32 Metric4 ;

		[read, write, Description ("The Metric5 property contains an alternate "
		"routing metric for this route. The semantics of this metric are "
		"determined by the routing protocol specified in the route's "
		"ipRouteProto value. If this metric is not used, its value should be "
		"set to -1.")
		]
	sint32 Metric5 ;

		[read, Description ("The Information property contains a reference to "
		"MIB definitions specific to the particular routing protocol that is "
		"responsible for this route, as determined by the value specified in "
		"the route's ipRouteProto value. If this information is not present, "
		"its value should be set to the OBJECT IDENTIFIER {0 0}, which is a "
		"syntactically valid object identifier, and any conformant "
		"implementation of ASN.1 and BER must be able to generate and recognize "
		"this value.")
		] 
	string Information;
};

// Persisted Route class

	[dynamic, provider("RouteProvider"), Description ("The IP4PersistedRouteTable "
	"class contains IP routes that are persited.  By default, the routes you add "
	"to the routing table aren't permanent. You lose these routes when you reboot "
	"your computer. However, if you use the command route -p add, Windows NT makes "
	"the permanent--so you won't lose the route when you reboot your computer. "
	"Persistent entries are automatically reinserted in your route table each "
	"time your computer's route table is rebuilt. Windows NT stores persistent "
	"routes in the Registry. This class deals specifically with IP4 and does not "
	"address IPX or IP6."), 
	Locale (0x409), UUID ("{2CAF4666-AC9B-45AB-00A6-AF8C537794C2}")]
class Win32_IP4PersistedRouteTable : CIM_LogicalElement
{
		[read,write,key, Description ("The Destination property contains the "
		"destination IP address for this persisted route.")
		] 
	string Destination;

		[read,write, key, Description ("The Mask property contains the mask used "
		"in this persisted entry. Masks should be logical-ANDed with the destination "
		"address before being compared to the value in the ipRouteDest field.")
		]
	string Mask;

		[read, write, key, Description ("The NextHop property contains the IP address "
		"of the next hop of this persisted route. (In the case of a route bound to an "
		"interface that is realized via a broadcast media, the value of this "
		"field is the agent's IP address on that interface.).")
		]
	string NextHop ;

		[read, write, key, Description ("The Metric1 property contains the primary "
		"routing metric for this persisted route. The semantics of this metric are "
		"determined by the routing protocol specified in the route's ipRouteProto "
		"value. If this metric is not used, its value should be set to -1.")
		]
	sint32 Metric1 ;
};

// ==================================================================
//    LogicalIdentity
// ==================================================================
	  [Association, Abstract, Description (
	   "CIM_LogicalIdentity is an abstract and generic association, "
	   "indicating that two LogicalElements represent different "
	   "aspects of the same underlying entity. This relationship "
	   "conveys what could be defined with multiple inheritance. It "
	   "is restricted to the 'logical' aspects of a ManagedSystem"
	   "Element. In most scenarios, the Identity relationship is "
	   "determined by the equivalence of Keys or some other "
	   "identifying properties of the related Elements. The "
	   "association should only be used in well understood scenarios. "
	   "This is why the association is abstract - allowing more "
	   "concrete definition and clarification in subclasses. One of "
	   "the scenarios where this relationship is reasonable is to "
	   "represent that a Device is both a 'bus' entity and a "
	   "'functional' entity. For example, a Device could be both a "
	   "USB (bus) and a Keyboard (functional) entity.") ]
class CIM_LogicalIdentity
{
        [Key, Description(
         "SystemElement represents one aspect of the Logical"
	   "Element.") ]
   CIM_LogicalElement ref SystemElement;
        [Key, Description(
         "SameElement represents an alternate aspect of the "
         "System entity.") ]
   CIM_LogicalElement ref SameElement;
};

// new assoc b/w persisted and routetable class will use rulebased assoc 
// but also populate for Nova builds.  IP routes don't apply to win9x
// On RuleBased addition - please clean syntax as required.

	[dynamic, provider("RouteProvider"), Description ("The ActiveRoute class "
	"assoctiates the current IP4 Route being used with the persited IP route "
	"table."),
	Locale (0x409), UUID ("{7BA1437A-C51C-421B-A359-2906AF2BDD9F}")]
class Win32_ActiveRoute : CIM_LogicalIdentity
{
		[Read: ToSubClass, Override ("SystemElement"): ToSubClass,
		Description ("The SystemElement represents the active IP route being"
	   "used."): ToSubClass,
		MappingStrings {""}: ToSubClass] 
   Win32_IP4RouteTable REF SystemElement;

        [Read: ToSubClass, Override ("SameElement"): ToSubClass,
        Description ("The SameElement represents persistent IP route in this"
        "relationship."): ToSubClass,
		MappingStrings {""}: ToSubClass] 
   Win32_IP4PersistedRouteTable REF SameElement;
};