doc: update NEWS

Set refid in server/broadcast packets to 127.127.1.255 when a time
smoothing offset is applied to the timestamps. This allows the clients
and administrators to detect that the server is not serving its best
estimate of the true time.

.gitignore

@@ -2,6 +2,8 @@
 .vimrc
 *.o
 *.swp
+*.dSYM
+*.DS_Store
 RELEASES
 Makefile
 chrony.conf.5

Makefile.in

@@ -73,12 +73,14 @@ $(HASH_OBJ) : $(patsubst %.o,%.c,$(HASH_OBJ))
 	$(CC) $(CFLAGS) $(CPPFLAGS) @HASH_COMPILE@ -c $<
 
 distclean : clean
+	-rm -f .DS_Store
 	-rm -f Makefile
 	-rm -f chrony.conf.5 chrony.texi chronyc.1 chronyd.8
 
 clean :
 	-rm -f *.o *.s chronyc chronyd core *~ chrony.info chrony.html chrony.txt
 	-rm -rf .deps
+	-rm -rf *.dSYM
 
 getdate.c :
 	bison -o getdate.c getdate.y
@@ -112,8 +114,6 @@ install: chronyd chronyc chrony.txt
 	chmod 644 $(DESTDIR)$(DOCDIR)/COPYING
 	cp README $(DESTDIR)$(DOCDIR)/README
 	chmod 644 $(DESTDIR)$(DOCDIR)/README
-	cp chrony.1 $(DESTDIR)$(MANDIR)/man1
-	chmod 644 $(DESTDIR)$(MANDIR)/man1/chrony.1
 	cp chronyc.1 $(DESTDIR)$(MANDIR)/man1
 	chmod 644 $(DESTDIR)$(MANDIR)/man1/chronyc.1
 	cp chronyd.8 $(DESTDIR)$(MANDIR)/man8
@@ -152,6 +152,12 @@ chrony.html : chrony.texi
 chrony.info : chrony.texi
 	makeinfo chrony.texi
 
+Makefile : Makefile.in configure
+	@echo
+	@echo Makefile needs to be regenerated, run ./configure
+	@echo
+	@exit 1
+
 .deps:
 	@mkdir .deps
 

NEWS

@@ -1,3 +1,24 @@
+New in version 2.1
+==================
+
+Enhancements
+------------
+* Add support for Mac OS X
+* Try to replace unreachable and falseticker servers/peers specified
+  by name like pool sources
+* Add leaponly option to smoothtime directive to allow synchronised
+  leap smear between multiple servers
+* Use specific reference ID when smoothing served time
+* Add smoothing command to report time smoothing status
+* Add smoothtime command to activate or reset time smoothing
+
+Bug fixes
+---------
+* Fix crash in source selection with preferred sources
+* Fix resetting of time smoothing
+* Include packet precision in peer dispersion
+* Fix crash in chronyc on invalid command syntax
+
 New in version 2.0
 ==================
 
@@ -15,7 +36,7 @@ Enhancements
 * Improve source selection
 * Handle offline sources as unreachable
 * Open NTP server port only when necessary (client access is allowed by
-  allow directive/command, peer or broadcast is configured)
+  allow directive/command or peer/broadcast is configured)
 * Change default bindcmdaddress to loopback address
 * Change default maxdelay to 3 seconds
 * Change default stratumweight to 0.001
@@ -30,6 +51,7 @@ Bug fixes
 ---------
 * Add sanity checks for time and frequency offset
 * Don't report synchronised status during leap second
+* Don't combine reference clocks with close NTP sources
 * Fix accepting requests from configured sources
 * Fix initial fallback drift setting
 
@@ -39,7 +61,7 @@ New in version 1.31.1
 Security fixes
 --------------
 * Protect authenticated symmetric NTP associations against DoS attacks
-  (CVE-2015-1799)
+  (CVE-2015-1853)
 * Fix access configuration with subnet size indivisible by 4 (CVE-2015-1821)
 * Fix initialization of reply slots for authenticated commands (CVE-2015-1822)
 

README

@@ -3,67 +3,35 @@ This is the README for chrony.
 What is chrony?
 ===============
 
-Chrony is a pair of programs for maintaining the accuracy of computer
-clocks.
+chrony is a versatile implementation of the Network Time Protocol (NTP).
+It can synchronize the system clock with NTP servers, reference clocks
+(e.g. GPS receiver), and manual input using wristwatch and keyboard.
+It can also operate as an NTPv4 (RFC 5905) server and peer to provide
+a time service to other computers in the network.
 
-chronyd is a (background) daemon program that can be started at boot
-time.  This does most of the work.
+It is designed to perform well in a wide range of conditions, including
+intermittent network connections, heavily congested networks, changing
+temperatures (ordinary computer clocks are sensitive to temperature),
+and systems that do not run continuosly, or run on a virtual machine.
 
-chronyc is a command-line interface program which can be used to
-monitor chronyd's performance and to change various operating
-parameters whilst it is running.
-
-chronyd's main function is to obtain measurements of the true (UTC)
-time from one of several sources, and correct the system clock
-accordingly.  It also works out the rate at which the system clock
-gains or loses time and uses this information to keep it accurate
-between measurements from the reference.
-
-The reference time can be derived from Network Time Protocol (NTP)
-servers, reference clocks, or wristwatch-and-keyboard (via chronyc).
-The main source of information about the Network Time Protocol is
-http://www.ntp.org.
-
-It is designed so that it can work on computers which only have
-intermittent access to reference sources, for example computers which
-use a dial-up account to access the Internet or laptops.  Of course, it
-will work well on computers with permanent connections too.
-
-In addition, on Linux it can monitor the system's real time clock
-performance, so the system can maintain accurate time even across
-reboots.
-
-Typical accuracies available between 2 machines are
-
-On an ethernet LAN : 100-200 microseconds, often much better
-On a V32bis dial-up modem connection : 10's of milliseconds (from one
-session to the next)
-
-With a good reference clock the accuracy can reach one microsecond.
-
-chronyd can also operate as an NTPv4 (RFC 5905) server, peer and broadcast
-server.
+Typical accuracy between two machines on a LAN is in tens, or a few
+hundreds, of microseconds; over the Internet, accuracy is typically
+within a few milliseconds.  With a good hardware reference clock
+sub-microsecond accuracy is possible.
 
+Two programs are included in chrony, chronyd is a daemon that can be
+started at boot time and chronyc is a command-line interface program
+which can be used to monitor chronyd's performance and to change various
+operating parameters whilst it is running.
 
 What will chrony run on?
 ========================
 
-Chrony can be successfully built and run on
-
-1. Linux 2.2.x, 2.3.x, 2.4.x, 2.6.x, 3.x
-
-2. Solaris 2.5/2.5.1/2.6/2.7/2.8 (various platforms) 
-
-3. SunOS 4.1.4 (Sparc 2 and Sparc 20)
-
-4. BSD/386 v1.1 has been reported to work using the SunOS 4.1 driver.
-
-5. NetBSD.
-
-Any other system will require a porting exercise.  You would need to
-start from one of the existing system-specific drivers and look into
-the quirks of certain system calls and the kernel on your target
-system.
+The software is known to work on Linux, FreeBSD, NetBSD, Mac OS X and
+Solaris.  Closely related systems may work too.  Any other system will
+likely require a porting exercise.  You would need to start from one
+of the existing system-specific drivers and look into the quirks of
+certain system calls and the kernel on your target system.
 
 How do I set it up?
 ===================
@@ -116,6 +84,11 @@ chrony-dev-request@chrony.tuxfamily.org
 
 as applicable.
 
+License
+=======
+
+chrony is distributed under the GNU General Public License version 2.
+
 
 Author
 ======
@@ -155,6 +128,9 @@ Stephan I. Boettcher <stephan@nevis1.columbia.edu>
 Erik Bryer <ebryer@spots.ab.ca>
     Entries in contrib directory
 
+Bryan Christianson <bryan@whatroute.net>
+    Support for Mac OS X
+
 Juliusz Chroboczek <jch@pps.jussieu.fr>
     Fix install rule in Makefile if chronyd file is in use.
 

addrfilt.c

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997,1998,1999,2000,2001,2002,2005
- * Copyright (C) Miroslav Lichvar  2009
+ * Copyright (C) Miroslav Lichvar  2009, 2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as

array.c

@@ -44,6 +44,8 @@ ARR_CreateInstance(unsigned int elem_size)
 {
   ARR_Instance array;
 
+  assert(elem_size > 0);
+
   array = MallocNew(struct ARR_Instance_Record);
 
   array->data = NULL;
@@ -64,6 +66,9 @@ ARR_DestroyInstance(ARR_Instance array)
 static void
 realloc_array(ARR_Instance array, unsigned int min_size)
 {
+  size_t data_size;
+
+  assert(min_size <= 2 * min_size);
   if (array->allocated >= min_size && array->allocated <= 2 * min_size)
     return;
 
@@ -74,7 +79,10 @@ realloc_array(ARR_Instance array, unsigned int min_size)
     array->allocated = min_size;
   }
 
-  array->data = Realloc(array->data, array->elem_size * array->allocated);
+  data_size = (size_t)array->elem_size * array->allocated;
+  assert(data_size / array->elem_size == array->allocated);
+
+  array->data = Realloc(array->data, data_size);
 }
 
 void *
@@ -89,7 +97,7 @@ void *
 ARR_GetElement(ARR_Instance array, unsigned int index)
 {
   assert(index < array->used);
-  return (void *)((char *)array->data + index * array->elem_size);
+  return (void *)((char *)array->data + (size_t)index * array->elem_size);
 }
 
 void *

candm.h

@@ -89,7 +89,9 @@
 #define REQ_RESELECT 48
 #define REQ_RESELECTDISTANCE 49
 #define REQ_MODIFY_MAKESTEP 50
-#define N_REQUEST_TYPES 51
+#define REQ_SMOOTHING 51
+#define REQ_SMOOTHTIME 52
+#define N_REQUEST_TYPES 53
 
 /* Special utoken value used to log on with first exchange being the
    password.  (This time value has long since gone by) */
@@ -116,6 +118,10 @@ typedef struct {
    pktlength.c, to get the number of bytes that ought to be
    transmitted for each packet type. */
 
+typedef struct {
+  int32_t EOR;
+} REQ_Null;
+
 typedef struct {
   IPAddr mask;
   IPAddr address;
@@ -215,19 +221,11 @@ typedef struct {
   int32_t EOR;
 } REQ_Manual;
 
-typedef struct {
-  int32_t EOR;
-} REQ_N_Sources;
-
 typedef struct {
   int32_t index;
   int32_t EOR;
 } REQ_Source_Data;
 
-typedef struct {
-  int32_t EOR;
-} REQ_Rekey;
-
 typedef struct {
   IPAddr ip;
   int32_t subnet_bits;
@@ -264,10 +262,6 @@ typedef struct {
   int32_t EOR;
 } REQ_Del_Source;
 
-typedef struct {
-  int32_t EOR;
-} REQ_WriteRtc;
-
 typedef struct {
   Float dfreq;
   int32_t EOR;
@@ -279,27 +273,11 @@ typedef struct {
   int32_t EOR;
 } REQ_Doffset;
 
-typedef struct {
-  int32_t EOR;
-} REQ_Tracking;
-
 typedef struct {
   uint32_t index;
   int32_t EOR;
 } REQ_Sourcestats;
 
-typedef struct {
-  int32_t EOR;
-} REQ_RTCReport;
-
-typedef struct {
-  int32_t EOR;
-} REQ_TrimRTC;
-
-typedef struct {
-  int32_t EOR;
-} REQ_CycleLogs;
-
 /* This is based on the response size rather than the
    request size */
 #define MAX_CLIENT_ACCESSES 8
@@ -310,32 +288,24 @@ typedef struct {
   int32_t EOR;
 } REQ_ClientAccessesByIndex;
 
-typedef struct {
-  int32_t EOR;
-} REQ_ManualList;
-
 typedef struct {
   int32_t index;
   int32_t EOR;
 } REQ_ManualDelete;
 
-typedef struct {
-  int32_t EOR;
-} REQ_MakeStep;
-
-typedef struct {
-  int32_t EOR;
-} REQ_Activity;
-
-typedef struct {
-  int32_t EOR;
-} REQ_Reselect;
-
 typedef struct {
   Float distance;
   int32_t EOR;
 } REQ_ReselectDistance;
 
+#define REQ_SMOOTHTIME_RESET 0
+#define REQ_SMOOTHTIME_ACTIVATE 1
+
+typedef struct {
+  int32_t option;
+  int32_t EOR;
+} REQ_SmoothTime;
+
 /* ================================================== */
 
 #define PKT_TYPE_CMD_REQUEST 1
@@ -365,7 +335,7 @@ typedef struct {
 
    Version 6 : added padding to requests to prevent amplification attack,
    changed maximum number of samples in manual list to 16, new commands: modify
-   makestep
+   makestep, smoothing report, smoothtime command
  */
 
 #define PROTO_VERSION_NUMBER 6
@@ -398,6 +368,7 @@ typedef struct {
   uint32_t token; /* Command token (to prevent replay attack) */
 
   union {
+    REQ_Null null;
     REQ_Online online;
     REQ_Offline offline;
     REQ_Burst burst;
@@ -415,28 +386,18 @@ typedef struct {
     REQ_Settime settime;
     REQ_Local local;
     REQ_Manual manual;
-    REQ_N_Sources n_sources;
     REQ_Source_Data source_data;
-    REQ_Rekey rekey;
     REQ_Allow_Deny allow_deny;
     REQ_Ac_Check ac_check;
     REQ_NTP_Source ntp_source;
     REQ_Del_Source del_source;
-    REQ_WriteRtc writertc;
     REQ_Dfreq dfreq;
     REQ_Doffset doffset;
-    REQ_Tracking tracking;
     REQ_Sourcestats sourcestats;
-    REQ_RTCReport rtcreport;
-    REQ_TrimRTC trimrtc;
-    REQ_CycleLogs cyclelogs;
     REQ_ClientAccessesByIndex client_accesses_by_index;
-    REQ_ManualList manual_list;
     REQ_ManualDelete manual_delete;
-    REQ_MakeStep make_step;
-    REQ_Activity activity;
-    REQ_Reselect reselect;
     REQ_ReselectDistance reselect_distance;
+    REQ_SmoothTime smoothtime;
   } data; /* Command specific parameters */
 
   /* The following fields only set the maximum size of the packet.
@@ -472,7 +433,8 @@ typedef struct {
 #define RPY_CLIENT_ACCESSES_BY_INDEX 10
 #define RPY_MANUAL_LIST 11
 #define RPY_ACTIVITY 12
-#define N_REPLY_TYPES 13
+#define RPY_SMOOTHING 13
+#define N_REPLY_TYPES 14
 
 /* Status codes */
 #define STT_SUCCESS 0
@@ -627,6 +589,19 @@ typedef struct {
   int32_t EOR;
 } RPY_Activity;
 
+#define RPY_SMT_FLAG_ACTIVE 0x1
+#define RPY_SMT_FLAG_LEAPONLY 0x2
+
+typedef struct {
+  uint32_t flags;
+  Float offset;
+  Float freq_ppm;
+  Float wander_ppm;
+  Float last_update_ago;
+  Float remaining_time;
+  int32_t EOR;
+} RPY_Smoothing;
+
 typedef struct {
   uint8_t version;
   uint8_t pkt_type;
@@ -653,6 +628,7 @@ typedef struct {
     RPY_ClientAccessesByIndex client_accesses_by_index;
     RPY_ManualList manual_list;
     RPY_Activity activity;
+    RPY_Smoothing smoothing;
   } data; /* Reply specific parameters */
 
   /* authentication of the packet, there is no hole after the actual data

chrony.1

@@ -1,72 +0,0 @@
-.TH CHRONY 1 "@MAN_DATE@" "chrony @VERSION@" "User's Manual"
-.SH NAME
-chrony \- programs for keeping computer clocks accurate
-
-.SH SYNOPSIS
-\fBchronyc\fR [\fIOPTIONS\fR]
-
-\fBchronyd\fR [\fIOPTIONS\fR]
-
-.SH DESCRIPTION
-\fBchrony\fR is a pair of programs for keeping computer clocks accurate.
-\fIchronyd\fR is a background (daemon) program and \fIchronyc\fR is a
-command-line interface to it. Time reference sources for chronyd can be
-NTP servers, human (via keyboard and \fIchronyc\fR), or the computer's
-real-time clock at boot time (Linux only). chronyd can determine the rate at
-which the computer gains or loses time and compensate for it while no external
-reference is present. Its use of NTP servers can be switched on and off
-(through \fIchronyc\fR) to support computers with dial-up/intermittent access
-to the Internet, and it can also act as an NTP server.
-
-.SH USAGE
-\fIchronyc\fR is a command-line interface program which can be used to
-monitor \fIchronyd\fR's performance and to change various operating
-parameters whilst it is running.
-
-\fIchronyd\fR's main function is to obtain measurements of the true (UTC)
-time from one of several sources, and correct the system clock
-accordingly.  It also works out the rate at which the system clock
-gains or loses time and uses this information to keep it accurate
-between measurements from the reference.
-
-The reference time can be derived from either Network Time Protocol
-(NTP) servers, reference clocks, or wristwatch-and-keyboard (via \fIchronyc\fR).
-The main source of information about the Network Time Protocol is
-\fIhttp://www.ntp.org\fR.
-
-It is designed so that it can work on computers which only have
-intermittent access to reference sources, for example computers which
-use a dial-up account to access the Internet or laptops.  Of course, it
-will work well on computers with permanent connections too.
-
-In addition, on Linux it can monitor the system's real time clock
-performance, so the system can maintain accurate time even across
-reboots.
-
-Typical accuracies available between 2 machines are
-
-On an ethernet LAN : 100-200 microseconds, often much better
-On a V32bis dial-up modem connection : 10's of milliseconds (from one
-session to the next)
-
-With a good reference clock the accuracy can reach one microsecond.
-
-\fIchronyd\fR can also operate as an NTPv4 (RFC 5905) server, peer and
-broadcast server.
-
-.SH "SEE ALSO"
-.BR chronyc(1),
-.BR chrony.conf(5),
-.BR chronyd(8)
-
-.I http://chrony.tuxfamily.org/
-
-.SH AUTHOR
-Richard Curnow <rc@rc0.org.uk>
-
-This man-page was written by Jan Schaumann <jschauma@netmeister.org> as part
-of "The Missing Man Pages Project".  Please see
-\fIhttp://www.netmeister.org/misc/m2p2/index.html\fR for details.
-
-The complete chrony documentation is supplied in texinfo format.
-

chrony.conf.5.in

@@ -40,9 +40,8 @@ useful configuration file would look something like
 
 When using a pool of NTP servers (one name is used for multiple servers which
 may change over time), it's better to specify them with the `pool' directive
-instead of multiple `server' directives in order to allow \fIchronyd\fR to
-replace unreachable or bad servers automatically.  The configuration file could
-in this case look like
+instead of multiple `server' directives.  The configuration file could in this
+case look like
 
 .EX
      pool pool.ntp.org iburst
@@ -52,7 +51,6 @@ in this case look like
 .EE
 
 .SH "SEE ALSO"
-.BR chrony(1),
 .BR chronyc(1),
 .BR chronyd(8)
 

chrony.texi.in

@@ -24,7 +24,7 @@
 @page
 @vskip 0pt plus 1filll
 Copyright @copyright{} 1997-1999 Richard P. Curnow
-Copyright @copyright{} 2009-2014 Miroslav Lichvar
+Copyright @copyright{} 2009-2015 Miroslav Lichvar
 @end titlepage
 @c }}}
 @c {{{ Top node
@@ -35,7 +35,6 @@ Copyright @copyright{} 2009-2014 Miroslav Lichvar
 * Installation::                How to compile and install the software
 * Typical scenarios::           How to configure the software for some common cases
 * Usage reference::             Reference manual
-* FAQ::                         Answers to some common questions about chrony
 * GPL::                         The GNU General Public License
 @end menu
 @c }}}
@@ -56,34 +55,30 @@ Copyright @copyright{} 2009-2014 Miroslav Lichvar
 @c {{{ S:Overview
 @node Overview
 @section Overview
-Chrony is a software package for maintaining the accuracy of computer
-system clocks.  It consists of a pair of programs :
+chrony is a versatile implementation of the Network Time Protocol (NTP).
+It can synchronize the system clock with NTP servers, reference clocks
+(e.g. GPS receiver), and manual input using wristwatch and keyboard.
+It can also operate as an NTPv4 (RFC 5905) server and peer to provide
+a time service to other computers in the network.
 
-@itemize @bullet
-@item @code{chronyd}.  This is a daemon which runs in background on the
-system.  It obtains measurements (e.g. via the network) of the system's
-offset relative to other systems, and adjusts the system time
-accordingly.  For isolated systems, the user can periodically enter the
-correct time by hand (using @code{chronyc}).  In either case,
-@code{chronyd} determines the rate at which the computer gains or loses
-time, and compensates for this.
+It is designed to perform well in a wide range of conditions, including
+intermittent network connections, heavily congested networks, changing
+temperatures (ordinary computer clocks are sensitive to temperature),
+and systems that do not run continuosly, or run on a virtual machine.
 
-@code{chronyd} can also act as an NTP server, and provide a time-of-day service
-to other computers.  A typical set-up is to run @code{chronyd} on a gateway
-computer that has a dial-up link to the Internet, and use it to serve time to
-computers on a private LAN sitting behind the gateway.  The IP addresses that
-can act as clients of @code{chronyd} can be tightly controlled.  The default is
-no client access.
+Typical accuracy between two machines on a LAN is in tens, or a few
+hundreds, of microseconds; over the Internet, accuracy is typically
+within a few milliseconds.  With a good hardware reference clock
+sub-microsecond accuracy is possible.
 
-@item @code{chronyc}.  This is a command-line driven control and
-monitoring program.  An administrator can use this to fine-tune various
-parameters within the daemon, add or delete servers etc whilst the
-daemon is running.
+Two programs are included in chrony, @code{chronyd} is a daemon that can
+be started at boot time and @code{chronyc} is a command-line interface
+program which can be used to monitor @code{chronyd}'s performance and to
+change various operating parameters whilst it is running.
 
 The IP addresses from which @code{chronyc} clients may connect can be tightly
 controlled.  The default is just the computer that @code{chronyd} itself is
 running on.
-@end itemize
 @c }}}
 @c {{{ S:Acknowledgments
 @node Acknowledgements
@@ -123,24 +118,10 @@ different operating systems may provide different function calls to
 achieve this, and even where the same function is used it may have
 different quirks in its behaviour.
 
-The software is known to work in the following environments:
-@itemize @bullet
-@item Linux 2.2 and newer
-
-@item NetBSD
-@item BSD/386
-
-@item Solaris 2.3/2.5/2.5.1/2.6/2.7/2.8 on Sparc (Sparc 20, Ultrasparc) and
-i386
-
-@item SunOS 4.1.4 on Sparc 2 and Sparc20.
-@end itemize
-
-Closely related systems may work too, but they have not been tested.
-
-Porting the software to other system (particularly to those supporting
-an @code{adjtime} system call) should not be difficult, however it
-requires access to such systems to test out the driver.
+The software is known to work on Linux, FreeBSD, NetBSD, Mac OS X and Solaris.
+Closely related systems may work too.  Porting the software to other systems
+(particularly to those supporting an @code{adjtime} system call) should not be
+difficult, however it requires access to such systems to test out the driver.
 @c }}}
 @c {{{ S:Other programs
 @node Other time synchronisation packages
@@ -305,8 +286,7 @@ Particular areas that need addressing are :
 @item Porting to other Unices
 
 This involves creating equivalents of sys_solaris.c, sys_linux.c etc for the
-new system.  Note, the Linux driver has been reported as working on a range of
-different architectures (Alpha, Sparc, MIPS as well as x86 of course).
+new system.
 
 @item Porting to Windows NT
 
@@ -600,9 +580,8 @@ rtcsync
 
 When using a pool of NTP servers (one name is used for multiple servers which
 may change over time), it's better to specify them with the @code{pool}
-directive instead of multiple @code{server} directives in order to allow
-@code{chronyd} to replace unreachable or bad servers automatically.  The
-configuration file could in this case look like
+directive instead of multiple @code{server} directives.  The configuration file
+could in this case look like
 
 @example
 pool pool.ntp.org iburst
@@ -1012,9 +991,8 @@ configuration file.  This option is useful if you want to stop and
 restart @code{chronyd} briefly for any reason, e.g. to install a new
 version.  However, it only makes sense on systems where the kernel can
 maintain clock compensation whilst not under @code{chronyd's} control.
-The only version where this happens so far is Linux.  On systems where
-this is not the case, e.g. Solaris and SunOS the option should not be
-used.
+The only version where this happens so far is Linux.  On other systems
+this option should not be used.
 @item -R
 When this option is used, the @code{initstepslew} directive and the
 @code{makestep} directive used with a positive limit will be ignored.
@@ -1812,33 +1790,37 @@ start with the @code{generatecommandkey} directive.
 @c {{{ leapsecmode
 @node leapsecmode directive
 @subsection leapsecmode
-This directive selects how @code{chronyd} handles leap seconds.  The Unix time
-doesn't include leap seconds.  When a leap second is applied to UTC, the system
-clock is off by one second and it needs to be corrected.
+A leap second is an adjustment that is occasionally applied to UTC to keep it
+close to the mean solar time.  When a leap second is inserted, the last day of
+June or December has an extra second 23:59:60.
 
-There are four options:
+For computer clocks that is a problem.  The Unix time is defined as number of
+seconds since 00:00:00 UTC on 1 January 1970 without leap seconds.  The system
+clock cannot have time 23:59:60, every minute has 60 seconds and every day has
+86400 seconds by definition.  The inserted leap second is skipped and the clock
+is suddenly ahead of UTC by one second.  The @code{leapsecmode} directive
+selects how that error is corrected.  There are four options:
 
 @table @code
 @item system
-The kernel steps the system clock backwards by one second at 0:00:00 UTC
-(before correction) when leap second is inserted or steps forward by one second
-at 23:59:59 UTC when leap second is deleted.  This is the default mode when the
-system driver supports leap seconds (currently Linux only).
+When inserting a leap second, the kernel steps the system clock backwards by
+one second when the clock gets to 00:00:00 UTC.  When deleting a leap second,
+it steps forward by one second when the clock gets to 23:59:59 UTC.  This is
+the default mode when the system driver supports leap seconds (currently Linux
+only).
 @item step
-This is similar to the system mode, except the clock is stepped by
-@code{chronyd} instead of the kernel.  This is the default mode when the system
-driver doesn't support leap seconds.
+This is similar to the @code{system} mode, except the clock is stepped by
+@code{chronyd} instead of the kernel.  It can be useful to avoid bugs in the
+kernel code that would be executed in the @code{system} mode.  This is the
+default mode when the system driver doesn't support leap seconds.
 @item slew
-The clock is corrected by slew starting at 0:00:00 UTC when leap second is
-inserted or 23:59:59 UTC when leap second is deleted.  This may be preferred
-over the system or step mode when applications running on the system are
-sensitive to jumps in the system time and it's acceptable that the clock will
-be off for a longer time.  On Linux with the default @code{maxslewrate} the
-correction takes 12 seconds.  Note that unless the @code{smoothtime} directive
-is used (@pxref{smoothtime directive}), there will still be a jump in the time
-that @code{chronyd} serves to NTP clients.  With the @code{smoothtime}
-directive, the leap second status will not be passed to NTP clients and the
-leap second will be "smeared" instead.
+The clock is corrected by slewing started at 00:00:00 UTC when a leap second is
+inserted or 23:59:59 UTC when a leap second is deleted.  This may be preferred
+over the @code{system} and @code{step} modes when applications running on the
+system are sensitive to jumps in the system time and it's acceptable that the
+clock will be off for a longer time.  On Linux with the default
+@code{maxslewrate} value (@pxref{maxslewrate directive}) the correction takes
+12 seconds.
 @item ignore
 No correction is applied to the clock for the leap second.  The clock will be
 corrected later in normal operation when new measurements are made and the
@@ -1851,19 +1833,40 @@ An example of the command is
 leapsecmode slew
 @end example
 
-An example enabling the leap smear for NTP clients with the @code{smoothtime}
-directive could be
+When serving time to NTP clients that can't be configured to correct their
+clocks for a leap second by slewing or they would correct them at slightly
+different rates when it's necessary to keep them close together, the
+@code{slew} mode can be combined with the @code{smoothtime} directive
+(@pxref{smoothtime directive}) to enable a server leap smear.
+
+When smearing a leap second, the leap status is suppressed on the server and
+the served time is corrected slowly be slewing instead of stepping. The clients
+don't need any special configuration as they don't know there is any leap
+second and they follow the server time which eventually brings them back to
+UTC.  Care must be taken to ensure they use for synchronization only NTP
+servers which smear the leap second in exactly the same way.
+
+This feature needs to be used carefully, because the server is intentionally
+not serving its best estimate of the true time.
+
+A recommended configuration to enable a server leap smear is:
 
 @example
 leapsecmode slew
-smoothtime 400 0.001
+maxslewrate 1000
+smoothtime 400 0.001 leaponly
 @end example
 
-With this configuration the NTP clients would not know there was any leap
-second.  The server time they follow would be slowly corrected in about 16
-hours after the leap second was applied to UTC.  This configuration should not
-be used if the clients poll also other NTP servers, because they could reject
-this server as a falseticker or could fail to select a source completely.
+The first directive is necessary to disable the clock step which would reset
+the smoothing process.  The second directive limits the slewing rate of the
+local clock to 1000 ppm, which improves the stability of the smoothing process
+when the local correction starts and ends.  The third directive enables the
+server time smoothing process.  It will start when the clock gets to 00:00:00
+UTC and it will take 17 hours 34 minutes to finish.  The frequency offset will
+be changing by 0.001 ppm per second and will reach maximum of 31.623 ppm.  The
+@code{leaponly} option makes the duration of the leap smear constant and allows
+the clients to safely synchronise with multiple identically configured leap
+smearing servers.
 @c }}}
 @c {{{ leapsectz
 @node leapsectz directive
@@ -2543,6 +2546,21 @@ be reported using the @code{clients} command in @code{chronyc}.
 The syntax of this directive is identical to that for the @code{server}
 directive (@pxref{server directive}), except that it is used to specify
 an NTP peer rather than an NTP server.
+
+Please note that NTP peers that are not configured with a key to enable
+authentication are vulnerable to a denial-of-service attack.  An attacker
+knowing that NTP hosts A and B are peering with each other can send a packet
+with random timestamps to host A with source address of B which will set the
+NTP state variables on A to the values sent by the attacker.  Host A will then
+send on its next poll to B a packet with originate timestamp that doesn't match
+the transmit timestamp of B and the packet will be dropped.  If the attacker
+does this periodically for both hosts, they won't be able to synchronize to
+each other.
+
+This attack can be prevented by enabling authentication with the key option, or
+using the @code{server} directive on both sides to specify the other host as a
+server instead of peer, the only drawback is that it will double the network
+traffic between the two hosts.
 @c }}}
 @c {{{ pidfile
 @node pidfile directive
@@ -3047,19 +3065,34 @@ it and keep their clocks close together even when large offset or frequency
 corrections are applied to the server's clock, for example after being offline
 for a longer time.
 
-If a large offset has been accumulated, it may take a very long time to smooth
-it out.  This directive should be used only when the clients are not configured
-to poll also another NTP server, because they could reject this server as a
-falseticker or fail to select a source completely.
+BE WARNED - the server is intentionally not serving its best estimate of the
+true time.  If a large offset has been accumulated, it may take a very long
+time to smooth it out.  This directive should be used only when the clients are
+not configured to poll also another NTP server, because they could reject this
+server as a falseticker or fail to select a source completely.
 
-The smoothing process is independent from any slewing applied to the local
-system clock, but the accumulated offset and frequency for smoothing will be
-reset when the clock is corrected by step, e.g. by the @code{makestep}
-directive or command.
+The smoothing process is implemented with a quadratic spline function with two
+or three pieces. It's independent from any slewing applied to the local system
+clock, but the accumulated offset and frequency will be reset when the clock is
+corrected by stepping, e.g. by the @code{makestep} directive or command.  The
+process can be reset without stepping the clock by the @code{smoothtime reset}
+command (@pxref{smoothtime command}).
 
-The directive takes two arguments, the maximum frequency offset of the smoothed
-time to the tracked NTP time (in ppm) and the maximum rate at which the
-frequency offset is allowed to change (in ppm per second).
+The first two arguments of the directive are the maximum frequency offset of
+the smoothed time to the tracked NTP time (in ppm) and the maximum rate at
+which the frequency offset is allowed to change (in ppm per second).
+@code{leaponly} is an optional third argument which enables a mode where only
+leap seconds are smoothed out and normal offset/frequency changes are ignored.
+The @code{leaponly} option is useful in a combination with the
+@code{leapsecmode slew} option (@pxref{leapsecmode directive}) to allow clients
+use multiple time smoothing servers safely.
+
+The smoothing process is activated automatically when 1/10000 of the estimated
+skew of the local clock falls below the maximum rate of frequency change.  It
+can be also activated manually by the @code{smoothtime activate} command,
+which is particularly useful when the clock is synchronized only with manual
+input and the skew is always larger than the threshold.  The @code{smoothing}
+command (@pxref{smoothing command}) can be used to monitor the process.
 
 An example suitable for clients using @code{ntpd} and 1024 second polling
 interval could be
@@ -3288,6 +3321,7 @@ password:
 @item @code{password}
 @item @code{quit}
 @item @code{rtcdata}
+@item @code{smoothing}
 @item @code{sources}
 @item @code{sourcestats}
 @item @code{tracking}
@@ -3348,6 +3382,8 @@ interface.
 * retries command::             Set maximum number of retries
 * rtcdata command::             Display RTC parameters
 * settime command::             Provide a manual input of the current time
+* smoothing command::           Display current time smoothing state
+* smoothtime command::          Reset/activate server time smoothing
 * sources command::             Display information about the current set of sources
 * sourcestats command::         Display the rate & offset estimation performance of sources
 * timeout command::             Set initial response timeout
@@ -3471,10 +3507,11 @@ directive in the configuration file.
 @c {{{ authhash
 @node authhash command
 @subsubsection authhash
-This command sets the hash function used for authenticating user commands.
-For successful authentication the hash function has to be the same as the one
-set for the command key in the keys file on the server.  It needs to be set
-before the @code{password} command is used.  The default hash function is MD5.
+This command selects the hash function used for authenticating user commands.
+For successful authentication the hash function has to be the same as the
+function specified for the command key in the keys file on the server
+(@pxref{keyfile directive}).  It needs to be selected before the
+@code{password} command is used.  The default hash function is MD5.
 
 An example is
 
@@ -4165,14 +4202,15 @@ password
 @end example
 
 The computer will respond with a @samp{Password:} prompt, at which you
-should enter the password and press return.  (Note that the no-echo mode
-is limited to 8 characters on SunOS 4.1 due to limitations in the system
-library.  Other systems do not have this restriction.)
+should enter the password and press return.
 
 The password can be encoded as a string of characters not containing a space
 with optional @code{ASCII:} prefix or as a hexadecimal number with @code{HEX:}
 prefix.  It has to match @code{chronyd's} currently defined command key
-(@pxref{commandkey directive}).
+(@pxref{commandkey directive}).  If the command key was specified with a
+different hash function than MD5, it's necessary to select the hash function
+with the @code{authhash} command (@pxref{authhash command}) before entering the
+password.
 
 The password command is run automatically on start if @code{chronyc} was
 started with the `-a' option.
@@ -4326,6 +4364,66 @@ settime Nov 21, 1997 16:30:05
 
 For a full description of @code{getdate}, get hold of the getdate
 documentation (bundled, for example, with the source for GNU tar).
+@c }}}
+@c {{{ smoothing
+@node smoothing command
+@subsubsection smoothing
+The @code{smoothing} command displays the current state of the NTP server time
+smoothing. An example of the output is shown below.
+
+@example
+Active         : Yes
+Offset         : +1.000268817 seconds
+Frequency      : -0.142859 ppm
+Wander         : -0.010000 ppm per second
+Last update    : 17.8 seconds ago
+Remaining time : 19988.4 seconds
+@end example
+
+The fields are explained as follows.
+
+@table @code
+@item Active
+This shows if the server time smoothing is currently active.  Possible values
+are @code{Yes} and @code{No}.  If the @code{leaponly} option is included in the
+@code{smoothtime} directive, @code{(leap second only)} will be shown on the
+line.
+
+@item Offset
+This is the current offset applied to the time sent to NTP clients.  Positive
+value means the clients are getting time that's ahead of true time.
+
+@item Frequency
+The current frequency offset of the served time.  Negative value means the time
+observed by clients is running slower than true time.
+
+@item Wander
+The current frequency wander of the served time.  Negative value means the time
+observed by clients is slowing down.
+
+@item Last update
+This field shows how long ago was the time smoothing process updated, e.g.
+@code{chronyd} accumulated a new measurement.
+
+@item Remaining time
+The time it would take for the smoothing process to get to zero offset and
+frequency if there were no more updates.
+@end table
+@c }}}
+@c {{{ smoothtime
+@node smoothtime command
+@subsubsection smoothtime
+The @code{smoothtime} command can be used to reset or activate the server time
+smoothing process if it is configured with the @code{smoothtime} directive
+(@pxref{smoothtime directive}).
+
+The syntax is as follows
+
+@example
+smoothtime reset
+smoothtime activate
+@end example
+
 @c }}}
 @c {{{ sources
 @node sources command
@@ -4551,7 +4649,7 @@ true time (which it reports to NTP clients when it is operating in
 server mode).  The value reported on this line is the difference due to
 this effect.
 
-On systems such as Solaris and SunOS, @code{chronyd} has no means to
+On systems other than Linux, @code{chronyd} doesn't
 adjust the fundamental rate of the system clock, so keeps the system
 time correct by periodically making offsets to it as though an error had
 been measured.  The build up of these offsets will be observed in this
@@ -4696,332 +4794,6 @@ command is issued.
 @c }}}
 @c }}}
 @c }}}
-@c {{{ Ch:FAQ
-@node FAQ
-@chapter Frequently asked questions
-
-@c {{{ Chapter top
-@menu
-* Administrative issues::
-* Chrony compared to other programs::
-* Configuration issues::
-* Computer is not synchronising::
-* Issues with chronyc::
-* Real-time clock issues::
-* Microsoft Windows::
-* NTP-specific issues::
-* Linux-specific issues::
-* Solaris-specific issues::
-@end menu
-@c }}}
-@c {{{ S:Administrative issues
-@node Administrative issues
-@section Administrative issues
-
-@subsection Where can I get chrony source code?
-Tarballs are available via the @code{Download} link on the chrony web site.
-For the current development from the developers' version control system see the
-@code{Git} link on the web site.
-
-@subsection Are there any packaged versions of chrony?
-We are aware of packages for Arch, CentOS, Debian, Fedora, Gentoo, Mageia,
-OpenSuse, Slackware, Ubuntu, FreeBSD and NetBSD.  We are not involved with how
-these are built or distributed.
-
-@subsection Where is the home page?
-It is currently at
-@uref{http://chrony.tuxfamily.org, http://chrony.tuxfamily.org}.
-
-@subsection Is there a mailing list?
-Yes, it's currently at @email{chrony-users@@chrony.tuxfamily.org}.  There is a
-low-volume list called chrony-announce which is just for announcements of new
-releases or similar matters of high importance.  You can join the lists by
-sending a message with the subject subscribe to
-@email{chrony-users-request@@chrony.tuxfamily.org} or
-@email{chrony-announce-request@@chrony.tuxfamily.org} respectively.
-
-For those who want to contribute to the development of chrony, there is a
-developers' mailing list.  You can subscribe by sending mail with the subject
-subscribe to @email{chrony-dev-request@@chrony.tuxfamily.org}.
-
-@subsection What licence is applied to chrony?
-Starting from version 1.15, chrony is licensed under the GNU General Public
-License, Version 2.  Versions prior to 1.15 were licensed under a custom
-BSD-like license.
-@c }}}
-@c {{{ S:Chrony compared to other programs
-@node Chrony compared to other programs
-@section Chrony compared to other programs
-@subsection How does chrony compare to ntpd?
-Chrony can usually synchronise the system clock faster and with better time
-accuracy, but it doesn't implement all NTP features, e.g. broadcast/multicast
-mode, or authentication based on public-key cryptography.  For a more detailed
-comparison, see section @code{Comparison with ntpd} in the manual.
-
-If your computer connects to the 'net only for few minutes at a time, you turn
-your Linux computer off or suspend it frequently, the clock is not very stable
-(e.g. it is a virtual machine), or you want to use NTP on an isolated network
-with no hardware clocks in sight, chrony will probably work much better for
-you.
-
-The original reason chrony was written was that ntpd (called xntpd at the
-time) could not to do anything sensible on a PC which was connected to
-the 'net only for about 5 minutes once or twice a day, mainly to
-upload/download email and news.  The requirements were
-
-@itemize @bullet
-@item slew the time to correct it when going online and NTP servers become
-visible
-@item determine the rate at which the computer gains or loses time and use this
-information to keep it reasonably correct between connects to the 'net.  This
-has to be done using a method that does not care about the intermittent
-availability of the references or the fact the computer is turned off between
-groups of measurements.
-@item maintain the time across reboots, by working out the error and drift rate
-of the computer's real-time clock and using this information to set the system
-clock correctly at boot up.
-@end itemize
-
-Also, when working with isolated networks with no true time references at all
-ntpd was found to give no help with managing the local clock's gain/loss rate
-on the NTP master node (which was set from watch).  Some automated support was
-added to chrony to deal with this.
-
-@c }}}
-@c {{{ S:Configuration issues
-@node Configuration issues
-@section Configuration issues
-
-@subsection I have several computers on a LAN.  Should be all clients of an external server?
-The best configuration is usually to make one computer the master, with the
-others as clients of it.  Add a @code{local} directive to the master's
-chrony.conf file.  This configuration will be better because
-
-@itemize @bullet
-@item the load on the external connection is less
-@item the load on the external NTP server(s) is less
-@item if your external connection goes down, the computers on the LAN will
-maintain a common time with each other.
-@end itemize
-
-@subsection Must I specify servers by IP address if DNS is not available on chronyd start?
-No.  Starting from version 1.25, @code{chronyd} will keep trying to resolve the
-hostnames specified in the @code{server} and @code{peer} directives in
-increasing intervals until it succeeds.  The @code{online} command can be
-issued from @code{chronyc} to try to resolve them immediately.
-
-@subsection How can I make chronyd more secure?
-If you don't need to serve time to NTP clients or peers, you can add
-@code{port 0} to the @file{chrony.conf} file to completely disable the NTP
-server functionality and prevent NTP requests from reaching @code{chronyd}.
-Starting from version 2.0, the NTP server port is open only when client access
-is allowed by the @code{allow} directive or command, an NTP peer is configured,
-or the @code{broadcast} directive is used.
-
-If you don't need to use @code{chronyc} remotely, you can add the following
-directives to the configuration file to bind the command sockets to the
-loopback interface.  This is done by default since version 2.0.
-
-@example
-bindcmdaddress 127.0.0.1
-bindcmdaddress ::1
-@end example
-
-If you don't need to use @code{chronyc} at all, you can disable the command
-sockets by adding @code{cmdport 0} to the configuration file.
-
-On Linux, if @code{chronyd} is compiled with support for Linux capabilities
-(available in the libcap library), you can specify an unprivileged user with
-the `-u' option or @code{user} directive in the @file{chrony.conf} file to drop
-root privileges after start.  The configure option @code{--with-user} can be
-used to drop the privileges by default.
-
-@subsection How can I improve the accuracy of the system clock with NTP sources?
-Select NTP servers that are well synchronised, stable and close to your network.
-It's better to use more than one server, three or four is usually recommended as
-the minimum, so @code{chronyd} can detect falsetickers and combine measurements
-from multiple sources.
-
-There are also useful options which can be set in the @code{server} directive,
-they are @code{minpoll}, @code{maxpoll}, @code{polltarget}, @code{maxdelay},
-@code{maxdelayratio} and @code{maxdelaydevratio}.
-
-The first three options set the minimum and maximum allowed polling interval,
-and how should be the actual interval adjusted in the specified range.  Their
-default values are 6 (64 seconds) for @code{minpoll}, 10 (1024 seconds) for
-@code{maxpoll} and 6 (samples) for @code{polltarget}.  The default values
-should be used for general servers on the internet.  With your own NTP servers
-or if have permission to poll some servers more frequently, setting these
-options for shorter polling intervals may significantly improve the accuracy of
-the system clock.
-
-The optimal polling interval depends on many factors, including the ratio
-between the wander of the clock and the network jitter (sometimes expressed in
-NTP documents as the Allan intercept), the temperature sensitivity of the
-crystal oscillator and the maximum rate of change of the temperature.
-
-An example of the directive for an NTP server on the internet that you are
-allowed to poll frequently could be
-
-@example
-server foo.example.net minpoll 4 maxpoll 6 polltarget 16
-@end example
-
-An example using very short polling intervals for a server located in the
-same LAN could be
-
-@example
-server ntp.local minpoll 2 maxpoll 4 polltarget 30
-@end example
-
-The maxdelay options are useful to ignore measurements with larger delay (e.g.
-due to congestion in the network) and improve the stability of the
-synchronisation.  The @code{maxdelaydevratio} option could be added to the
-example with local NTP server
-
-@example
-server ntp.local minpoll 2 maxpoll 4 polltarget 30 maxdelaydevratio 2
-@end example
-
-@c }}}
-@c {{{ S:Computer is not synchronising
-@node Computer is not synchronising
-@section Computer is not synchronising
-
-This is the most common problem.  There are a number of reasons, see the
-following questions.
-
-@subsection Behind a firewall?
-If there is a firewall between you and the NTP server you're trying to use,
-the packets may be blocked.  Try using a tool like wireshark or tcpdump to see
-if you're getting responses from the server.  If you have an external modem,
-see if the receive light blinks straight after the transmit light (when the
-link is quiet apart from the NTP traffic.)  Try adding @code{log measurements}
-to the @file{chrony.conf} file and look in the measurements.log file after
-chrony has been running for a short period.  See if any measurements appear.
-
-@subsection Do you have a non-permanent (i.e. intermittent) Internet connection?
-Check that you're using chronyc's @code{online} and @code{offline} commands
-appropriately.  Again, check in measurements.log to see if you're getting any
-data back from the server.
-
-@subsection In measurements.log, do the '7' and '8' flag columns always show zero?
-Do you have a @code{local stratum X} directive in the @file{chrony.conf} file?  If X
-is lower than the stratum of the server you're trying to use, this situation
-will arise.  You should always make X quite high (e.g. 10) in this directive.
-@c }}}
-@c {{{ S:Issues with chronyc
-@node Issues with chronyc
-@section Issues with chronyc
-
-@subsection I keep getting the error @code{506 Cannot talk to daemon}
-When accessing @code{chronyd} remotely, make sure that the @file{chrony.conf}
-file (on the computer where @code{chronyd} is running) has a @code{cmdallow}
-entry for the computer you are running @code{chronyc} on and an appropriate
-@code{bindcmdaddress} directive.  This isn't necessary for localhost.
-
-Perhaps @code{chronyd} is not running.  Try using the ps command (e.g. on
-Linux, 'ps -auxw') to see if it's running.  Or try 'netstat -a' and see if the
-ports 123/udp and 323/udp are listening.  If @code{chronyd} is not running, you
-may have a problem with the way you are trying to start it (e.g. at boot time).
-
-Perhaps you have a firewall set up in a way that blocks packets on port
-323/udp.  You need to amend the firewall configuration in this case.
-
-@subsection Is the chronyc<->chronyd protocol documented anywhere?
-Only by the source code :-)  See cmdmon.c (@code{chronyd} side) and client.c
-(@code{chronyc} side).
-@c }}}
-@c {{{ S:Real-time clock issues
-@node Real-time clock issues
-@section Real-time clock issues
-
-@subsection What is the real-time clock (RTC)?
-This is the clock which keeps the time even when your computer is turned off.
-It works with 1 second resolution.  @code{chronyd} can monitor the rate at
-which the real-time clock gains or loses time, and compensate for it when you
-set the system time from it at the next reboot.  See the documentation for
-details.
-
-@subsection I want to use chronyd's real-time clock support.  Must I disable hwclock?
-The hwclock program is often set-up by default in the boot and shutdown scripts
-with many Linux installations.  If you want to use chronyd's real-time clock
-support, the important thing is to disable hwclock in the shutdown procedure.
-If you don't, it will over-write the RTC with a new value, unknown to
-@code{chronyd}. At the next reboot, @code{chronyd} will compensate this (wrong)
-time with its estimate of how far the RTC has drifted whilst the power was off,
-giving a meaningless initial system time.
-
-There is no need to remove hwclock from the boot process, as long as
-@code{chronyd} is started after it has run.
-
-@subsection I just keep getting the '513 RTC driver not running' message
-For the real time clock support to work, you need the following three things
-@itemize @bullet
-@item a kernel that is supported (e.g. 2.2 onwards)
-@item enhanced RTC support compiled into the kernel
-@item an @code{rtcfile} directive in your chrony.conf file
-@end itemize
-@c }}}
-@c {{{ S:Microsoft Windows
-@node Microsoft Windows
-@section Microsoft Windows
-
-@subsection Does chrony support Windows?
-No.  The @code{chronyc} program (the command-line client used for configuring
-@code{chronyd} while it is running) has been successfully built and run under
-Cygwin in the past.  @code{chronyd} is not portable, because part of it is very
-system-dependent.  It needs adapting to work with Windows' equivalent of the
-adjtimex() call, and it needs to be made to work as an NT service.
-
-@subsection Are there any plans to support Windows?
-We have no plans to do this.  Anyone is welcome to pick this work up and
-contribute it back to the project.
-@c }}}
-@c {{{ S:NTP-specific issues
-@node NTP-specific issues
-@section NTP-specific issues
-
-@subsection Can chrony be driven from broadcast NTP servers?
-No, this NTP mode is not implemented yet.
-
-@subsection Can chronyd transmit broadcast NTP packets (e.g. to synchronise other computers on a private LAN)?
-Yes.  Starting from version 1.17, chrony has this capability.
-
-@subsection Can chrony keep the system clock a fixed offset away from real time?
-This is not possible as the program currently stands.
-
-@subsection What happens if the network connection is dropped without using chronyc's 'offline' command first?
-In this case @code{chronyd} will keep trying to access the server(s) that it
-thinks are online.  Eventually it will decide that they are unreachable and no
-longer consider itself synchronised to them.  If you have other computers on
-your LAN accessing the computer that is affected this way, they too will become
-'unsynchronised', unless you have the 'local' directive set up on the master
-computer.
-
-The 'auto_offline' option to the 'server' entry in the chrony.conf file may be
-useful to avoid this situation.
-@c }}}
-@c {{{ S:Linux-specific issues
-@node Linux-specific issues
-@section Linux-specific issues
-
-@subsection I get "Could not open /dev/rtc, Device or resource busy" in my syslog file
-Some other program running on the system may be using the device.
-@c }}}
-@c {{{ S:Solaris-specific issues
-@node Solaris-specific issues
-@section Solaris-specific issues
-
-@subsection On Solaris 2.8, I get an error message about not being able to open kvm to change dosynctodr
-(The dosynctodr variable controls whether Solaris couples the equivalent of its
-BIOS clock into its system clock at regular intervals).  The Solaris port of
-chrony was developed in the Solaris 2.5 era.  Some aspect of the Solaris kernel
-has changed which prevents the same technique working.  We no longer have root
-access to any Solaris machines to work on this, and we are reliant on somebody
-developing the patch and testing it.
-@c }}}
-@c }}}
 @c {{{ apx:GNU General Public License
 @node GPL
 @appendix GNU General Public License

chronyc.1.in

@@ -60,8 +60,7 @@ interactively.
 To report bugs, please visit \fIhttp://chrony.tuxfamily.org\fR
 
 .SH "SEE ALSO"
-.BR chronyd(8),
-.BR chrony(1)
+.BR chronyd(8)
 
 .I http://chrony.tuxfamily.org/
 

chronyd.8.in

@@ -70,8 +70,7 @@ option is useful if you want to stop and restart \fBchronyd\fR briefly for any
 reason, e.g. to install a new version.  However, it only makes sense on
 systems where the kernel can maintain clock compensation whilst not under
 \fBchronyd\fR's control.  The only version where this happens so far is Linux.
-On systems where this is not the case, e.g. Solaris and SunOS the option
-should not be used.
+On other systems this option should not be used.
 .TP
 .B \-R
 When this option is used, the \fIinitstepslew\fR directive and the
@@ -135,7 +134,6 @@ To report bugs, please visit \fIhttp://chrony.tuxfamily.org/\fR
 \fBchronyd\fR is documented in detail in the documentation supplied with the
 distribution (\fIchrony.txt\fR and \fIchrony.texi\fR).
 
-.BR chrony(1),
 .BR chronyc(1),
 .BR chrony.conf(5),
 .BR hwclock(8),

client.c

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
- * Copyright (C) Miroslav Lichvar  2009-2014
+ * Copyright (C) Miroslav Lichvar  2009-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -640,7 +640,8 @@ process_cmd_manual(CMD_Request *msg, const char *line)
 static int
 parse_allow_deny(CMD_Request *msg, char *line)
 {
-  unsigned long a, b, c, d, n;
+  unsigned long a, b, c, d;
+  int n, specified_subnet_bits;
   IPAddr ip;
   char *p;
   
@@ -657,7 +658,7 @@ parse_allow_deny(CMD_Request *msg, char *line)
     
     n = 0;
     if (!UTI_StringToIP(p, &ip) &&
-        (n = sscanf(p, "%lu.%lu.%lu.%lu", &a, &b, &c, &d)) == 0) {
+        (n = sscanf(p, "%lu.%lu.%lu.%lu", &a, &b, &c, &d)) <= 0) {
 
       /* Try to parse as the name of a machine */
       if (DNS_Name2IPAddress(p, &ip, 1) != DNS_Success) {
@@ -710,7 +711,6 @@ parse_allow_deny(CMD_Request *msg, char *line)
       UTI_IPHostToNetwork(&ip, &msg->data.allow_deny.ip);
 
       if (slashpos) {
-        int specified_subnet_bits, n;
         n = sscanf(slashpos+1, "%d", &specified_subnet_bits);
         if (n == 1) {
           msg->data.allow_deny.subnet_bits = htonl(specified_subnet_bits);
@@ -1184,6 +1184,8 @@ give_help(void)
   printf("reselect : Reselect synchronisation source\n");
   printf("rtcdata : Print current RTC performance parameters\n");
   printf("settime <date/time (e.g. Nov 21, 1997 16:30:05 or 16:30:05)> : Manually set the daemon time\n");
+  printf("smoothing : Display current time smoothing state\n");
+  printf("smoothtime reset|activate : Reset/activate time smoothing\n");
   printf("sources [-v] : Display information about current sources\n");
   printf("sourcestats [-v] : Display estimation information about current sources\n");
   printf("tracking : Display system time information\n");
@@ -1964,6 +1966,63 @@ process_cmd_tracking(char *line)
 }
 /* ================================================== */
 
+static int
+process_cmd_smoothing(char *line)
+{
+  CMD_Request request;
+  CMD_Reply reply;
+  uint32_t flags;
+  double offset;
+  double freq_ppm;
+  double wander_ppm;
+  double last_update_ago;
+  double remaining_time;
+
+  request.command = htons(REQ_SMOOTHING);
+
+  if (request_reply(&request, &reply, RPY_SMOOTHING, 0)) {
+    flags = ntohl(reply.data.smoothing.flags);
+    offset = UTI_FloatNetworkToHost(reply.data.smoothing.offset);
+    freq_ppm = UTI_FloatNetworkToHost(reply.data.smoothing.freq_ppm);
+    wander_ppm = UTI_FloatNetworkToHost(reply.data.smoothing.wander_ppm);
+    last_update_ago = UTI_FloatNetworkToHost(reply.data.smoothing.last_update_ago);
+    remaining_time = UTI_FloatNetworkToHost(reply.data.smoothing.remaining_time);
+
+    printf("Active         : %s%s\n",
+           flags & RPY_SMT_FLAG_ACTIVE ? "Yes" : "No",
+           flags & RPY_SMT_FLAG_LEAPONLY ? " (leap second only)" : "");
+    printf("Offset         : %+.9f seconds\n", offset);
+    printf("Frequency      : %+.6f ppm\n", freq_ppm);
+    printf("Wander         : %+.6f ppm per second\n", wander_ppm);
+    printf("Last update    : %.1f seconds ago\n", last_update_ago);
+    printf("Remaining time : %.1f seconds\n", remaining_time);
+    return 1;
+  }
+
+  return 0;
+}
+
+/* ================================================== */
+
+static int
+process_cmd_smoothtime(CMD_Request *msg, const char *line)
+{
+  if (!strcmp(line, "reset")) {
+    msg->data.smoothtime.option = htonl(REQ_SMOOTHTIME_RESET);
+  } else if (!strcmp(line, "activate")) {
+    msg->data.smoothtime.option = htonl(REQ_SMOOTHTIME_ACTIVATE);
+  } else {
+    fprintf(stderr, "Invalid syntax for smoothtime command\n");
+    return 0;
+  }
+
+  msg->command = htons(REQ_SMOOTHTIME);
+
+  return 1;
+}
+
+/* ================================================== */
+
 static int
 process_cmd_rtcreport(char *line)
 {
@@ -2535,6 +2594,11 @@ process_line(char *line, int *quit)
   } else if (!strcmp(command, "settime")) {
     do_normal_submit = 0;
     ret = process_cmd_settime(line);
+  } else if (!strcmp(command, "smoothing")) {
+    do_normal_submit = 0;
+    ret = process_cmd_smoothing(line);
+  } else if (!strcmp(command, "smoothtime")) {
+    do_normal_submit = process_cmd_smoothtime(&tx_message, line);
   } else if (!strcmp(command, "sources")) {
     do_normal_submit = 0;
     ret = process_cmd_sources(line);
@@ -2681,7 +2745,7 @@ static void
 display_gpl(void)
 {
     printf("chrony version %s\n"
-           "Copyright (C) 1997-2003, 2007, 2009-2014 Richard P. Curnow and others\n"
+           "Copyright (C) 1997-2003, 2007, 2009-2015 Richard P. Curnow and others\n"
            "chrony comes with ABSOLUTELY NO WARRANTY.  This is free software, and\n"
            "you are welcome to redistribute it under certain conditions.  See the\n"
            "GNU General Public License version 2 for details.\n\n",
@@ -2729,10 +2793,11 @@ main(int argc, char **argv)
       family = IPADDR_INET6;
     } else if (!strcmp("-v", *argv) || !strcmp("--version",*argv)) {
       printf("chronyc (chrony) version %s (%s)\n", CHRONY_VERSION, CHRONYC_FEATURES);
-      exit(0);
+      return 0;
     } else if (!strncmp(*argv, "-", 1)) {
-      fprintf(stderr, "Usage : %s [-h <hostname>] [-p <port-number>] [-n] [-4|-6] [-m] [-a] [-f <file>]] [command]\n", progname);
-      exit(1);
+      fprintf(stderr, "Usage: %s [-h HOST] [-p PORT] [-n] [-4|-6] [-a] [-f FILE] [-m] [COMMAND]\n",
+              progname);
+      return 1;
     } else {
       break; /* And process remainder of line as a command */
     }

cmdmon.c

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
- * Copyright (C) Miroslav Lichvar  2009-2014
+ * Copyright (C) Miroslav Lichvar  2009-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -37,6 +37,7 @@
 #include "keys.h"
 #include "ntp_sources.h"
 #include "ntp_core.h"
+#include "smooth.h"
 #include "sources.h"
 #include "sourcestats.h"
 #include "reference.h"
@@ -162,6 +163,8 @@ static const char permissions[] = {
   PERMIT_AUTH, /* RESELECT */
   PERMIT_AUTH, /* RESELECTDISTANCE */
   PERMIT_AUTH, /* MODIFY_MAKESTEP */
+  PERMIT_OPEN, /* SMOOTHING */
+  PERMIT_AUTH, /* SMOOTHTIME */
 };
 
 /* ================================================== */
@@ -712,13 +715,12 @@ transmit_reply(CMD_Reply *msg, union sockaddr_in46 *where_to, int auth_len)
   }
 }
   
-
 /* ================================================== */
 
 static void
-handle_null(CMD_Request *rx_message, CMD_Reply *tx_message)
+handle_dump(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  tx_message->status = htons(STT_SUCCESS);
+  SRC_DumpSources();
 }
 
 /* ================================================== */
@@ -726,16 +728,12 @@ handle_null(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_online(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   IPAddr address, mask;
+
   UTI_IPNetworkToHost(&rx_message->data.online.mask, &mask);
   UTI_IPNetworkToHost(&rx_message->data.online.address, &address);
-  status = NSR_TakeSourcesOnline(&mask, &address);
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NSR_TakeSourcesOnline(&mask, &address))
     tx_message->status = htons(STT_NOSUCHSOURCE);
-  }
 }
 
 /* ================================================== */
@@ -743,16 +741,12 @@ handle_online(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_offline(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   IPAddr address, mask;
+
   UTI_IPNetworkToHost(&rx_message->data.offline.mask, &mask);
   UTI_IPNetworkToHost(&rx_message->data.offline.address, &address);
-  status = NSR_TakeSourcesOffline(&mask, &address);
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NSR_TakeSourcesOffline(&mask, &address))
     tx_message->status = htons(STT_NOSUCHSOURCE);
-  }
 }
 
 /* ================================================== */
@@ -760,19 +754,14 @@ handle_offline(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_burst(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   IPAddr address, mask;
+
   UTI_IPNetworkToHost(&rx_message->data.burst.mask, &mask);
   UTI_IPNetworkToHost(&rx_message->data.burst.address, &address);
-  status = NSR_InitiateSampleBurst(ntohl(rx_message->data.burst.n_good_samples),
-                                   ntohl(rx_message->data.burst.n_total_samples),
-                                   &mask, &address);
-  
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NSR_InitiateSampleBurst(ntohl(rx_message->data.burst.n_good_samples),
+                               ntohl(rx_message->data.burst.n_total_samples),
+                               &mask, &address))
     tx_message->status = htons(STT_NOSUCHSOURCE);
-  }
 }
 
 /* ================================================== */
@@ -780,17 +769,12 @@ handle_burst(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_modify_minpoll(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   IPAddr address;
+
   UTI_IPNetworkToHost(&rx_message->data.modify_minpoll.address, &address);
-  status = NSR_ModifyMinpoll(&address,
-                             ntohl(rx_message->data.modify_minpoll.new_minpoll));
-  
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NSR_ModifyMinpoll(&address,
+                         ntohl(rx_message->data.modify_minpoll.new_minpoll)))
     tx_message->status = htons(STT_NOSUCHSOURCE);
-  }
 }
 
 /* ================================================== */
@@ -798,17 +782,12 @@ handle_modify_minpoll(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_modify_maxpoll(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   IPAddr address;
+
   UTI_IPNetworkToHost(&rx_message->data.modify_minpoll.address, &address);
-  status = NSR_ModifyMaxpoll(&address,
-                             ntohl(rx_message->data.modify_minpoll.new_minpoll));
-  
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NSR_ModifyMaxpoll(&address,
+                         ntohl(rx_message->data.modify_minpoll.new_minpoll)))
     tx_message->status = htons(STT_NOSUCHSOURCE);
-  }
 }
 
 /* ================================================== */
@@ -816,16 +795,12 @@ handle_modify_maxpoll(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_modify_maxdelay(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   IPAddr address;
+
   UTI_IPNetworkToHost(&rx_message->data.modify_maxdelay.address, &address);
-  status = NSR_ModifyMaxdelay(&address,
-                              UTI_FloatNetworkToHost(rx_message->data.modify_maxdelay.new_max_delay));
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NSR_ModifyMaxdelay(&address,
+        UTI_FloatNetworkToHost(rx_message->data.modify_maxdelay.new_max_delay)))
     tx_message->status = htons(STT_NOSUCHSOURCE);
-  }
 }
 
 /* ================================================== */
@@ -833,16 +808,12 @@ handle_modify_maxdelay(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_modify_maxdelayratio(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   IPAddr address;
+
   UTI_IPNetworkToHost(&rx_message->data.modify_maxdelayratio.address, &address);
-  status = NSR_ModifyMaxdelayratio(&address,
-                                   UTI_FloatNetworkToHost(rx_message->data.modify_maxdelayratio.new_max_delay_ratio));
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NSR_ModifyMaxdelayratio(&address,
+        UTI_FloatNetworkToHost(rx_message->data.modify_maxdelayratio.new_max_delay_ratio)))
     tx_message->status = htons(STT_NOSUCHSOURCE);
-  }
 }
 
 /* ================================================== */
@@ -850,16 +821,12 @@ handle_modify_maxdelayratio(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_modify_maxdelaydevratio(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   IPAddr address;
+
   UTI_IPNetworkToHost(&rx_message->data.modify_maxdelaydevratio.address, &address);
-  status = NSR_ModifyMaxdelaydevratio(&address,
-                                   UTI_FloatNetworkToHost(rx_message->data.modify_maxdelaydevratio.new_max_delay_dev_ratio));
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NSR_ModifyMaxdelaydevratio(&address,
+        UTI_FloatNetworkToHost(rx_message->data.modify_maxdelaydevratio.new_max_delay_dev_ratio)))
     tx_message->status = htons(STT_NOSUCHSOURCE);
-  }
 }
 
 /* ================================================== */
@@ -867,17 +834,12 @@ handle_modify_maxdelaydevratio(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_modify_minstratum(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   IPAddr address;
+
   UTI_IPNetworkToHost(&rx_message->data.modify_minpoll.address, &address);
-  status = NSR_ModifyMinstratum(&address,
-                             ntohl(rx_message->data.modify_minstratum.new_min_stratum));
-  
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NSR_ModifyMinstratum(&address,
+                            ntohl(rx_message->data.modify_minstratum.new_min_stratum)))
     tx_message->status = htons(STT_NOSUCHSOURCE);
-  }
 }
 
 /* ================================================== */
@@ -885,17 +847,12 @@ handle_modify_minstratum(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_modify_polltarget(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   IPAddr address;
+
   UTI_IPNetworkToHost(&rx_message->data.modify_polltarget.address, &address);
-  status = NSR_ModifyPolltarget(&address,
-                             ntohl(rx_message->data.modify_polltarget.new_poll_target));
-  
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NSR_ModifyPolltarget(&address,
+                            ntohl(rx_message->data.modify_polltarget.new_poll_target)))
     tx_message->status = htons(STT_NOSUCHSOURCE);
-  }
 }
 
 /* ================================================== */
@@ -904,7 +861,6 @@ static void
 handle_modify_maxupdateskew(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
   REF_ModifyMaxupdateskew(UTI_FloatNetworkToHost(rx_message->data.modify_maxupdateskew.new_max_update_skew));
-  tx_message->status = htons(STT_SUCCESS);
 }
 
 /* ================================================== */
@@ -914,7 +870,6 @@ handle_modify_makestep(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
   REF_ModifyMakestep(ntohl(rx_message->data.modify_makestep.limit),
                      UTI_FloatNetworkToHost(rx_message->data.modify_makestep.threshold));
-  tx_message->status = htons(STT_SUCCESS);
 }
 
 /* ================================================== */
@@ -929,7 +884,6 @@ handle_settime(CMD_Request *rx_message, CMD_Reply *tx_message)
   if (!MNL_IsEnabled()) {
     tx_message->status = htons(STT_NOTENABLED);
   } else if (MNL_AcceptTimestamp(&ts, &offset_cs, &dfreq_ppm, &new_afreq_ppm)) {
-    tx_message->status = htons(STT_SUCCESS);
     tx_message->reply = htons(RPY_MANUAL_TIMESTAMP);
     tx_message->data.manual_timestamp.centiseconds = htonl((int32_t)offset_cs);
     tx_message->data.manual_timestamp.dfreq_ppm = UTI_FloatHostToNetwork(dfreq_ppm);
@@ -952,7 +906,6 @@ handle_local(CMD_Request *rx_message, CMD_Reply *tx_message)
   } else {
     REF_DisableLocal();
   }
-  tx_message->status = htons(STT_SUCCESS);
 }
 
 /* ================================================== */
@@ -972,8 +925,10 @@ handle_manual(CMD_Request *rx_message, CMD_Reply *tx_message)
     case 2:
       MNL_Reset();
       break;
+    default:
+      tx_message->status = htons(STT_INVALID);
+      break;
   }
-  tx_message->status = htons(STT_SUCCESS);
 }
 
 /* ================================================== */
@@ -983,7 +938,6 @@ handle_n_sources(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
   int n_sources;
   n_sources = SRC_ReadNumberOfSources();
-  tx_message->status = htons(STT_SUCCESS);
   tx_message->reply = htons(RPY_N_SOURCES);
   tx_message->data.n_sources.n_sources = htonl(n_sources);
 }
@@ -997,7 +951,7 @@ handle_source_data(CMD_Request *rx_message, CMD_Reply *tx_message)
   struct timeval now_corr;
 
   /* Get data */
-  LCL_ReadCookedTime(&now_corr, NULL);
+  SCH_GetLastEventTime(&now_corr, NULL, NULL);
   if (SRC_ReportSource(ntohl(rx_message->data.source_data.index), &report, &now_corr)) {
     switch (SRC_GetType(ntohl(rx_message->data.source_data.index))) {
       case SRC_NTP:
@@ -1008,7 +962,6 @@ handle_source_data(CMD_Request *rx_message, CMD_Reply *tx_message)
         break;
     }
     
-    tx_message->status = htons(STT_SUCCESS);
     tx_message->reply  = htons(RPY_SOURCE_DATA);
     
     UTI_IPHostToNetwork(&report.ip_addr, &tx_message->data.source_data.ip_addr);
@@ -1071,136 +1024,35 @@ handle_source_data(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_rekey(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  tx_message->status = htons(STT_SUCCESS);
   KEY_Reload();
 }
 
 /* ================================================== */
 
 static void
-handle_allow(CMD_Request *rx_message, CMD_Reply *tx_message)
+handle_allowdeny(CMD_Request *rx_message, CMD_Reply *tx_message, int allow, int all)
 {
   IPAddr ip;
   int subnet_bits;
+
   UTI_IPNetworkToHost(&rx_message->data.allow_deny.ip, &ip);
   subnet_bits = ntohl(rx_message->data.allow_deny.subnet_bits);
-  if (NCR_AddAccessRestriction(&ip, subnet_bits, 1, 0)) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!NCR_AddAccessRestriction(&ip, subnet_bits, allow, all))
     tx_message->status = htons(STT_BADSUBNET);
-  }              
 }
 
 /* ================================================== */
 
 static void
-handle_allowall(CMD_Request *rx_message, CMD_Reply *tx_message)
+handle_cmdallowdeny(CMD_Request *rx_message, CMD_Reply *tx_message, int allow, int all)
 {
   IPAddr ip;
   int subnet_bits;
+
   UTI_IPNetworkToHost(&rx_message->data.allow_deny.ip, &ip);
   subnet_bits = ntohl(rx_message->data.allow_deny.subnet_bits);
-  if (NCR_AddAccessRestriction(&ip, subnet_bits, 1, 1)) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!CAM_AddAccessRestriction(&ip, subnet_bits, allow, all))
     tx_message->status = htons(STT_BADSUBNET);
-  }              
-}
-
-/* ================================================== */
-
-static void
-handle_deny(CMD_Request *rx_message, CMD_Reply *tx_message)
-{
-  IPAddr ip;
-  int subnet_bits;
-  UTI_IPNetworkToHost(&rx_message->data.allow_deny.ip, &ip);
-  subnet_bits = ntohl(rx_message->data.allow_deny.subnet_bits);
-  if (NCR_AddAccessRestriction(&ip, subnet_bits, 0, 0)) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
-    tx_message->status = htons(STT_BADSUBNET);
-  }              
-}
-
-/* ================================================== */
-
-static void
-handle_denyall(CMD_Request *rx_message, CMD_Reply *tx_message)
-{
-  IPAddr ip;
-  int subnet_bits;
-  UTI_IPNetworkToHost(&rx_message->data.allow_deny.ip, &ip);
-  subnet_bits = ntohl(rx_message->data.allow_deny.subnet_bits);
-  if (NCR_AddAccessRestriction(&ip, subnet_bits, 0, 1)) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
-    tx_message->status = htons(STT_BADSUBNET);
-  }              
-}
-
-/* ================================================== */
-
-static void
-handle_cmdallow(CMD_Request *rx_message, CMD_Reply *tx_message)
-{
-  IPAddr ip;
-  int subnet_bits;
-  UTI_IPNetworkToHost(&rx_message->data.allow_deny.ip, &ip);
-  subnet_bits = ntohl(rx_message->data.allow_deny.subnet_bits);
-  if (CAM_AddAccessRestriction(&ip, subnet_bits, 1, 0)) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
-    tx_message->status = htons(STT_BADSUBNET);
-  }              
-}
-
-/* ================================================== */
-
-static void
-handle_cmdallowall(CMD_Request *rx_message, CMD_Reply *tx_message)
-{
-  IPAddr ip;
-  int subnet_bits;
-  UTI_IPNetworkToHost(&rx_message->data.allow_deny.ip, &ip);
-  subnet_bits = ntohl(rx_message->data.allow_deny.subnet_bits);
-  if (CAM_AddAccessRestriction(&ip, subnet_bits, 1, 1)) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
-    tx_message->status = htons(STT_BADSUBNET);
-  }              
-}
-
-/* ================================================== */
-
-static void
-handle_cmddeny(CMD_Request *rx_message, CMD_Reply *tx_message)
-{
-  IPAddr ip;
-  int subnet_bits;
-  UTI_IPNetworkToHost(&rx_message->data.allow_deny.ip, &ip);
-  subnet_bits = ntohl(rx_message->data.allow_deny.subnet_bits);
-  if (CAM_AddAccessRestriction(&ip, subnet_bits, 0, 0)) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
-    tx_message->status = htons(STT_BADSUBNET);
-  }              
-}
-
-/* ================================================== */
-
-static void
-handle_cmddenyall(CMD_Request *rx_message, CMD_Reply *tx_message)
-{
-  IPAddr ip;
-  int subnet_bits;
-  UTI_IPNetworkToHost(&rx_message->data.allow_deny.ip, &ip);
-  subnet_bits = ntohl(rx_message->data.allow_deny.subnet_bits);
-  if (CAM_AddAccessRestriction(&ip, subnet_bits, 0, 1)) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
-    tx_message->status = htons(STT_BADSUBNET);
-  }              
 }
 
 /* ================================================== */
@@ -1266,7 +1118,6 @@ handle_add_source(NTP_Source_Type type, CMD_Request *rx_message, CMD_Reply *tx_m
   status = NSR_AddSource(&rem_addr, type, &params);
   switch (status) {
     case NSR_Success:
-      tx_message->status = htons(STT_SUCCESS);
       break;
     case NSR_AlreadyInUse:
       tx_message->status = htons(STT_SOURCEALREADYKNOWN);
@@ -1297,7 +1148,6 @@ handle_del_source(CMD_Request *rx_message, CMD_Reply *tx_message)
   status = NSR_RemoveSource(&rem_addr);
   switch (status) {
     case NSR_Success:
-      tx_message->status = htons(STT_SUCCESS);
       break;
     case NSR_NoSuchSource:
       tx_message->status = htons(STT_NOSUCHSOURCE);
@@ -1317,7 +1167,6 @@ handle_writertc(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
   switch (RTC_WriteParameters()) {
     case RTC_ST_OK:
-      tx_message->status = htons(STT_SUCCESS);
       break;
     case RTC_ST_NODRV:
       tx_message->status = htons(STT_NORTC);
@@ -1337,7 +1186,6 @@ handle_dfreq(CMD_Request *rx_message, CMD_Reply *tx_message)
   dfreq = UTI_FloatNetworkToHost(rx_message->data.dfreq.dfreq);
   LCL_AccumulateDeltaFrequency(dfreq * 1.0e-6);
   LOG(LOGS_INFO, LOGF_CmdMon, "Accumulated delta freq of %.3fppm", dfreq);
-  tx_message->status = htons(STT_SUCCESS);
 }
 
 /* ================================================== */
@@ -1352,7 +1200,6 @@ handle_doffset(CMD_Request *rx_message, CMD_Reply *tx_message)
   doffset = (double) sec + 1.0e-6 * (double) usec;
   LOG(LOGS_INFO, LOGF_CmdMon, "Accumulated delta offset of %.6f seconds", doffset);
   LCL_AccumulateOffset(doffset, 0.0);
-  tx_message->status = htons(STT_SUCCESS);
 }
 
 /* ================================================== */
@@ -1363,7 +1210,6 @@ handle_tracking(CMD_Request *rx_message, CMD_Reply *tx_message)
   RPT_TrackingReport rpt;
 
   REF_GetTrackingReport(&rpt);
-  tx_message->status = htons(STT_SUCCESS);
   tx_message->reply  = htons(RPY_TRACKING);
   tx_message->data.tracking.ref_id = htonl(rpt.ref_id);
   UTI_IPHostToNetwork(&rpt.ip_addr, &tx_message->data.tracking.ip_addr);
@@ -1383,6 +1229,60 @@ handle_tracking(CMD_Request *rx_message, CMD_Reply *tx_message)
 
 /* ================================================== */
 
+static void
+handle_smoothing(CMD_Request *rx_message, CMD_Reply *tx_message)
+{
+  RPT_SmoothingReport report;
+  struct timeval now;
+
+  SCH_GetLastEventTime(&now, NULL, NULL);
+
+  if (!SMT_GetSmoothingReport(&report, &now)) {
+    tx_message->status = htons(STT_NOTENABLED);
+    return;
+  }
+
+  tx_message->reply  = htons(RPY_SMOOTHING);
+  tx_message->data.smoothing.flags = htonl((report.active ? RPY_SMT_FLAG_ACTIVE : 0) |
+                                           (report.leap_only ? RPY_SMT_FLAG_LEAPONLY : 0));
+  tx_message->data.smoothing.offset = UTI_FloatHostToNetwork(report.offset);
+  tx_message->data.smoothing.freq_ppm = UTI_FloatHostToNetwork(report.freq_ppm);
+  tx_message->data.smoothing.wander_ppm = UTI_FloatHostToNetwork(report.wander_ppm);
+  tx_message->data.smoothing.last_update_ago = UTI_FloatHostToNetwork(report.last_update_ago);
+  tx_message->data.smoothing.remaining_time = UTI_FloatHostToNetwork(report.remaining_time);
+}
+
+/* ================================================== */
+
+static void
+handle_smoothtime(CMD_Request *rx_message, CMD_Reply *tx_message)
+{
+  struct timeval now;
+  int option;
+
+  if (!SMT_IsEnabled()) {
+    tx_message->status = htons(STT_NOTENABLED);
+    return;
+  }
+
+  option = ntohl(rx_message->data.smoothtime.option);
+  SCH_GetLastEventTime(&now, NULL, NULL);
+
+  switch (option) {
+    case REQ_SMOOTHTIME_RESET:
+      SMT_Reset(&now);
+      break;
+    case REQ_SMOOTHTIME_ACTIVATE:
+      SMT_Activate(&now);
+      break;
+    default:
+      tx_message->status = htons(STT_INVALID);
+      break;
+  }
+}
+
+/* ================================================== */
+
 static void
 handle_sourcestats(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
@@ -1390,12 +1290,11 @@ handle_sourcestats(CMD_Request *rx_message, CMD_Reply *tx_message)
   RPT_SourcestatsReport report;
   struct timeval now_corr;
 
-  LCL_ReadCookedTime(&now_corr, NULL);
+  SCH_GetLastEventTime(&now_corr, NULL, NULL);
   status = SRC_ReportSourcestats(ntohl(rx_message->data.sourcestats.index),
                                  &report, &now_corr);
 
   if (status) {
-    tx_message->status = htons(STT_SUCCESS);
     tx_message->reply = htons(RPY_SOURCESTATS);
     tx_message->data.sourcestats.ref_id = htonl(report.ref_id);
     UTI_IPHostToNetwork(&report.ip_addr, &tx_message->data.sourcestats.ip_addr);
@@ -1421,7 +1320,6 @@ handle_rtcreport(CMD_Request *rx_message, CMD_Reply *tx_message)
   RPT_RTC_Report report;
   status = RTC_GetReport(&report);
   if (status) {
-    tx_message->status = htons(STT_SUCCESS);
     tx_message->reply  = htons(RPY_RTC);
     UTI_TimevalHostToNetwork(&report.ref_time, &tx_message->data.rtc.ref_time);
     tx_message->data.rtc.n_samples = htons(report.n_samples);
@@ -1439,13 +1337,8 @@ handle_rtcreport(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_trimrtc(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
-  status = RTC_Trim();
-  if (status) {
-    tx_message->status = htons(STT_SUCCESS);
-  } else {
+  if (!RTC_Trim())
     tx_message->status = htons(STT_NORTC);
-  }
 }
 
 /* ================================================== */
@@ -1454,8 +1347,6 @@ static void
 handle_cyclelogs(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
   LOG_CycleLogFiles();
-  
-  tx_message->status = htons(STT_SUCCESS);
 }
 
 /* ================================================== */
@@ -1469,14 +1360,13 @@ handle_client_accesses_by_index(CMD_Request *rx_message, CMD_Reply *tx_message)
   int i, j;
   struct timeval now;
 
-  LCL_ReadCookedTime(&now, NULL);
+  SCH_GetLastEventTime(&now, NULL, NULL);
 
   first_index = ntohl(rx_message->data.client_accesses_by_index.first_index);
   n_indices = ntohl(rx_message->data.client_accesses_by_index.n_indices);
   if (n_indices > MAX_CLIENT_ACCESSES)
     n_indices = MAX_CLIENT_ACCESSES;
 
-  tx_message->status = htons(STT_SUCCESS);
   tx_message->reply = htons(RPY_CLIENT_ACCESSES_BY_INDEX);
 
   for (i = 0, j = 0; i < n_indices; i++) {
@@ -1521,7 +1411,6 @@ handle_manual_list(CMD_Request *rx_message, CMD_Reply *tx_message)
   RPY_ManualListSample *sample;
   RPT_ManualSamplesReport report[MAX_MANUAL_LIST_SAMPLES];
 
-  tx_message->status = htons(STT_SUCCESS);
   tx_message->reply = htons(RPY_MANUAL_LIST);
   
   MNL_ReportSamples(report, MAX_MANUAL_LIST_SAMPLES, &n_samples);
@@ -1540,16 +1429,11 @@ handle_manual_list(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_manual_delete(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  int status;
   int index;
 
   index = ntohl(rx_message->data.manual_delete.index);
-  status = MNL_DeleteSample(index);
-  if (!status) {
+  if (!MNL_DeleteSample(index))
     tx_message->status = htons(STT_BADSAMPLE);
-  } else {
-    tx_message->status = htons(STT_SUCCESS);
-  }
 }  
 
 /* ================================================== */
@@ -1557,11 +1441,8 @@ handle_manual_delete(CMD_Request *rx_message, CMD_Reply *tx_message)
 static void
 handle_make_step(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
-  if (!LCL_MakeStep()) {
+  if (!LCL_MakeStep())
     tx_message->status = htons(STT_FAILED);
-  } else {
-    tx_message->status = htons(STT_SUCCESS);
-  }
 }
 
 /* ================================================== */
@@ -1576,7 +1457,6 @@ handle_activity(CMD_Request *rx_message, CMD_Reply *tx_message)
   tx_message->data.activity.burst_online = htonl(report.burst_online);
   tx_message->data.activity.burst_offline = htonl(report.burst_offline);
   tx_message->data.activity.unresolved = htonl(report.unresolved);
-  tx_message->status = htons(STT_SUCCESS);
   tx_message->reply = htons(RPY_ACTIVITY);
 }
 
@@ -1588,7 +1468,6 @@ handle_reselect_distance(CMD_Request *rx_message, CMD_Reply *tx_message)
   double dist;
   dist = UTI_FloatNetworkToHost(rx_message->data.reselect_distance.distance);
   SRC_SetReselectDistance(dist);
-  tx_message->status = htons(STT_SUCCESS);
 }
 
 /* ================================================== */
@@ -1597,7 +1476,6 @@ static void
 handle_reselect(CMD_Request *rx_message, CMD_Reply *tx_message)
 {
   SRC_ReselectSource();
-  tx_message->status = htons(STT_SUCCESS);
 }
 
 /* ================================================== */
@@ -1653,8 +1531,8 @@ read_from_cmd_socket(void *anything)
 
   read_length = status;
 
-  LCL_ReadRawTime(&now);
-  LCL_CookTime(&now, &cooked_now, NULL);
+  /* Get current time cheaply */
+  SCH_GetLastEventTime(&cooked_now, NULL, &now);
 
   UTI_SockaddrToIPAndPort(&where_from.u, &remote_ip, &remote_port);
 
@@ -1709,6 +1587,7 @@ read_from_cmd_socket(void *anything)
   tx_message.command = rx_message.command;
   tx_message.sequence = rx_message.sequence;
   tx_message.reply = htons(RPY_NULL);
+  tx_message.status = htons(STT_SUCCESS);
   tx_message.pad1 = 0;
   tx_message.pad2 = 0;
   tx_message.pad3 = 0;
@@ -1909,7 +1788,11 @@ read_from_cmd_socket(void *anything)
     if (allowed) {
       switch(rx_command) {
         case REQ_NULL:
-          handle_null(&rx_message, &tx_message);
+          /* Do nothing */
+          break;
+
+        case REQ_DUMP:
+          handle_dump(&rx_message, &tx_message);
           break;
 
         case REQ_ONLINE:
@@ -1932,11 +1815,6 @@ read_from_cmd_socket(void *anything)
           handle_modify_maxpoll(&rx_message, &tx_message);
           break;
 
-        case REQ_DUMP:
-          SRC_DumpSources();
-          tx_message.status = htons(STT_SUCCESS);
-          break;
-
         case REQ_MODIFY_MAXDELAY:
           handle_modify_maxdelay(&rx_message, &tx_message);
           break;
@@ -2004,35 +1882,35 @@ read_from_cmd_socket(void *anything)
           break;
 
         case REQ_ALLOW:
-          handle_allow(&rx_message, &tx_message);
+          handle_allowdeny(&rx_message, &tx_message, 1, 0);
           break;
 
         case REQ_ALLOWALL:
-          handle_allowall(&rx_message, &tx_message);
+          handle_allowdeny(&rx_message, &tx_message, 1, 1);
           break;
 
         case REQ_DENY:
-          handle_deny(&rx_message, &tx_message);
+          handle_allowdeny(&rx_message, &tx_message, 0, 0);
           break;
 
         case REQ_DENYALL:
-          handle_denyall(&rx_message, &tx_message);
+          handle_allowdeny(&rx_message, &tx_message, 0, 1);
           break;
 
         case REQ_CMDALLOW:
-          handle_cmdallow(&rx_message, &tx_message);
+          handle_cmdallowdeny(&rx_message, &tx_message, 1, 0);
           break;
 
         case REQ_CMDALLOWALL:
-          handle_cmdallowall(&rx_message, &tx_message);
+          handle_cmdallowdeny(&rx_message, &tx_message, 1, 1);
           break;
 
         case REQ_CMDDENY:
-          handle_cmddeny(&rx_message, &tx_message);
+          handle_cmdallowdeny(&rx_message, &tx_message, 0, 0);
           break;
 
         case REQ_CMDDENYALL:
-          handle_cmddenyall(&rx_message, &tx_message);
+          handle_cmdallowdeny(&rx_message, &tx_message, 0, 1);
           break;
 
         case REQ_ACCHECK:
@@ -2071,6 +1949,14 @@ read_from_cmd_socket(void *anything)
           handle_tracking(&rx_message, &tx_message);
           break;
 
+        case REQ_SMOOTHING:
+          handle_smoothing(&rx_message, &tx_message);
+          break;
+
+        case REQ_SMOOTHTIME:
+          handle_smoothtime(&rx_message, &tx_message);
+          break;
+
         case REQ_SOURCESTATS:
           handle_sourcestats(&rx_message, &tx_message);
           break;

cmdparse.c

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
- * Copyright (C) Miroslav Lichvar  2013
+ * Copyright (C) Miroslav Lichvar  2013-2014
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as

conf.c

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
- * Copyright (C) Miroslav Lichvar  2009-2014
+ * Copyright (C) Miroslav Lichvar  2009-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -189,6 +189,7 @@ static char *pidfile;
 /* Smoothing constants */
 static double smooth_max_freq = 0.0; /* in ppm */
 static double smooth_max_wander = 0.0; /* in ppm/s */
+static int smooth_leap_only = 0;
 
 /* Temperature sensor, update interval and compensation coefficients */
 static char *tempcomp_sensor_file = NULL;
@@ -1174,11 +1175,23 @@ parse_broadcast(char *line)
 static void
 parse_smoothtime(char *line)
 {
-  check_number_of_args(line, 2);
+  if (get_number_of_args(line) != 3)
+    check_number_of_args(line, 2);
+
   if (sscanf(line, "%lf %lf", &smooth_max_freq, &smooth_max_wander) != 2) {
     smooth_max_freq = 0.0;
     command_parse_error();
   }
+
+  line = CPS_SplitWord(CPS_SplitWord(line));
+  smooth_leap_only = 0;
+
+  if (*line) {
+    if (!strcasecmp(line, "leaponly"))
+      smooth_leap_only = 1;
+    else
+      command_parse_error();
+  }
 }
 
 /* ================================================== */
@@ -1738,10 +1751,11 @@ CNF_GetLockMemory(void)
 /* ================================================== */
 
 void
-CNF_GetSmooth(double *max_freq, double *max_wander)
+CNF_GetSmooth(double *max_freq, double *max_wander, int *leap_only)
 {
   *max_freq = smooth_max_freq;
   *max_wander = smooth_max_wander;
+  *leap_only = smooth_leap_only;
 }
 
 /* ================================================== */

conf.h

@@ -96,7 +96,7 @@ extern void CNF_SetupAccessRestrictions(void);
 extern int CNF_GetSchedPriority(void);
 extern int CNF_GetLockMemory(void);
 
-extern void CNF_GetSmooth(double *max_freq, double *max_wander);
+extern void CNF_GetSmooth(double *max_freq, double *max_wander, int *leap_only);
 extern void CNF_GetTempComp(char **file, double *interval, char **point_file, double *T0, double *k0, double *k1, double *k2);
 
 extern char *CNF_GetUser(void);

configure

@@ -404,6 +404,13 @@ case $SYSTEM in
         SYSDEFS=""
         echo "Configuring for $SYSTEM"
     ;;
+    Darwin-* )
+        EXTRA_OBJECTS="sys_macosx.o"
+        EXTRA_LIBS="-lresolv"
+        EXTRA_CLI_LIBS="-lresolv"
+        add_def MACOSX
+        echo "Configuring for MacOS X (" $SYSTEM "MacOS X version" $VERSION ")"
+    ;;
     SunOS-i86pc* )                                          
         # Doug Woodward <dougw@whistler.com> reported that this configuration
         # works for Solaris 2.8 / SunOS 5.8 on x86 platforms

doc/faq.adoc

@@ -0,0 +1,273 @@
+:toc:
+:numbered:
+
+Frequently Asked Questions
+==========================
+
+== Chrony compared to other programs
+
+=== How does +chrony+ compare to +ntpd+?
+
++chrony+ can usually synchronise the system clock faster and with better time
+accuracy, but it doesn't implement all NTP features, e.g. broadcast/multicast
+mode, or authentication based on public-key cryptography.  For a more detailed
+comparison, see the http://chrony.tuxfamily.org/comparison.html[comparison
+page] on the chrony website and section
+http://chrony.tuxfamily.org/manual.html#Comparison-with-ntpd[Comparison with
+ntpd] in the manual.
+
+If your computer connects to the 'net only for few minutes at a time, you turn
+your Linux computer off or suspend it frequently, the clock is not very stable
+(e.g. it is a virtual machine), or you want to use NTP on an isolated network
+with no hardware clocks in sight, +chrony+ will probably work much better for
+you.
+
+The original reason +chrony+ was written was that ntpd (called xntpd at the
+time) could not to do anything sensible on a PC which was connected to the 'net
+only for about 5 minutes once or twice a day, mainly to upload/download email
+and news.  The requirements were
+
+* slew the time to correct it when going online and NTP servers
+  become visible
+* determine the rate at which the computer gains or loses time and
+  use this information to keep it reasonably correct between connects
+  to the 'net.  This has to be done using a method that does not care
+  about the intermittent availability of the references or the fact
+  the computer is turned off between groups of measurements.
+* maintain the time across reboots, by working out the error and
+  drift rate of the computer's real-time clock and using this
+  information to set the system clock correctly at boot up.
+
+Also, when working with isolated networks with no true time references at all
+ntpd was found to give no help with managing the local clock's gain/loss rate
+on the NTP master node (which was set from watch).  Some automated support was
+added to +chrony+ to deal with this.
+
+== Configuration issues
+
+=== I have several computers on a LAN. Should be all clients of an external server?
+
+The best configuration is usually to make one computer the master, with
+the others as clients of it.  Add a +local+ directive to the master's
+'chrony.conf' file.  This configuration will be better because
+
+* the load on the external connection is less
+* the load on the external NTP server(s) is less
+* if your external connection goes down, the computers on the LAN
+  will maintain a common time with each other.
+
+=== Must I specify servers by IP address if DNS is not available on chronyd start?
+
+No.  Starting from version 1.25, +chronyd+ will keep trying to resolve
+the hostnames specified in the +server+ and +peer+ directives in
+increasing intervals until it succeeds.  The +online+ command can be
+issued from +chronyc+ to try to resolve them immediately.
+
+=== How can I make chronyd more secure?
+
+If you don't need to serve time to NTP clients or peers, you can add +port 0+
+to the 'chrony.conf' file to completely disable the NTP server functionality
+and prevent NTP requests from reaching +chronyd+. Starting from version 2.0,
+the NTP server port is open only when client access is allowed by the +allow+
+directive or command, an NTP peer is configured, or the +broadcast+ directive
+is used.
+
+If you don't need to use +chronyc+ remotely, you can add the following
+directives to the configuration file to bind the command sockets to the
+loopback interface.  This is done by default since version 2.0.
+
+----
+bindcmdaddress 127.0.0.1
+bindcmdaddress ::1
+----
+
+If you don't need to use +chronyc+ at all, you can disable the command sockets
+by adding +cmdport 0+ to the configuration file.
+
+On Linux, if +chronyd+ is compiled with support for Linux capabilities
+(available in the libcap library), you can specify an unprivileged user with
+the +-u+ option or +user+ directive in the 'chrony.conf' file to drop root
+privileges after start.  The configure option +--with-user+ can be used to drop
+the privileges by default.
+
+=== How can I improve the accuracy of the system clock with NTP sources?
+
+Select NTP servers that are well synchronised, stable and close to your
+network.  It's better to use more than one server, three or four is usually
+recommended as the minimum, so +chronyd+ can detect falsetickers and combine
+measurements from multiple sources.
+
+There are also useful options which can be set in the +server+ directive, they
+are +minpoll+, +maxpoll+, +polltarget+, +maxdelay+, +maxdelayratio+ and
++maxdelaydevratio+.
+
+The first three options set the minimum and maximum allowed polling interval,
+and how should be the actual interval adjusted in the specified range.  Their
+default values are 6 (64 seconds) for +minpoll+, 10 (1024 seconds) for
++maxpoll+ and 6 (samples) for +polltarget+.  The default values should be used
+for general servers on the internet.  With your own NTP servers or if have
+permission to poll some servers more frequently, setting these options for
+shorter polling intervals may significantly improve the accuracy of the system
+clock.
+
+The optimal polling interval depends on many factors, including the ratio
+between the wander of the clock and the network jitter (sometimes expressed in
+NTP documents as the Allan intercept), the temperature sensitivity of the
+crystal oscillator and the maximum rate of change of the temperature.
+
+An example of the directive for an NTP server on the internet that you are
+allowed to poll frequently could be
+
+----
+server foo.example.net minpoll 4 maxpoll 6 polltarget 16
+----
+
+An example using very short polling intervals for a server located in the same
+LAN could be
+
+----
+server ntp.local minpoll 2 maxpoll 4 polltarget 30
+----
+
+The maxdelay options are useful to ignore measurements with larger delay (e.g.
+due to congestion in the network) and improve the stability of the
+synchronisation.  The +maxdelaydevratio+ option could be added to the example
+with local NTP server
+
+----
+server ntp.local minpoll 2 maxpoll 4 polltarget 30 maxdelaydevratio 2
+----
+
+== Computer is not synchronising
+
+This is the most common problem.  There are a number of reasons, see the
+following questions.
+
+=== Behind a firewall?
+
+If there is a firewall between you and the NTP server you're trying to use, the
+packets may be blocked.  Try using a tool like wireshark or tcpdump to see if
+you're getting responses from the server.  If you have an external modem, see
+if the receive light blinks straight after the transmit light (when the link is
+quiet apart from the NTP traffic.)  Try adding +log measurements+ to the
+'chrony.conf' file and look in the 'measurements.log' file after +chrony+ has
+been running for a short period. See if any measurements appear.
+
+=== Are NTP servers specified with the +offline+ option?
+
+Check that you're using +chronyc+\'s +online+ and +offline+ commands
+appropriately.  Again, check in 'measurements.log' to see if you're getting any
+data back from the server.
+
+== Issues with +chronyc+
+
+=== I keep getting the error +506 Cannot talk to daemon+
+
+When accessing +chronyd+ remotely, make sure that the 'chrony.conf' file (on
+the computer where +chronyd+ is running) has a 'cmdallow' entry for the
+computer you are running +chronyc+ on and an appropriate 'bindcmdaddress'
+directive.  This isn't necessary for localhost.
+
+Perhaps +chronyd+ is not running.  Try using the +ps+ command (e.g.  on Linux,
++ps -auxw+) to see if it's running.  Or try +netstat -a+ and see if the ports
+123/udp and 323/udp are listening.  If +chronyd+ is not running, you may have a
+problem with the way you are trying to start it (e.g.  at boot time).
+
+Perhaps you have a firewall set up in a way that blocks packets on port
+323/udp.  You need to amend the firewall configuration in this case.
+
+=== Is the +chronyc+ / +chronyd+ protocol documented anywhere?
+
+Only by the source code :-) See 'cmdmon.c' (+chronyd+ side) and 'client.c'
+(+chronyc+ side).
+
+== Real-time clock issues
+
+=== What is the real-time clock (RTC)?
+
+This is the clock which keeps the time even when your computer is turned off.
+It works with 1 second resolution.  +chronyd+ can monitor the rate at which the
+real-time clock gains or loses time, and compensate for it when you set the
+system time from it at the next reboot.  See the documentation for details.
+
+=== I want to use +chronyd+'s real-time clock support. Must I disable hwclock?
+
+The hwclock program is often set-up by default in the boot and shutdown scripts
+with many Linux installations.  If you want to use +chronyd+'s real-time clock
+support, the important thing is to disable hwclock in the shutdown procedure.
+If you don't, it will over-write the RTC with a new value, unknown to
++chronyd+.  At the next reboot, +chronyd+ will compensate this (wrong) time
+with its estimate of how far the RTC has drifted whilst the power was off,
+giving a meaningless initial system time.
+
+There is no need to remove hwclock from the boot process, as long as +chronyd+
+is started after it has run.
+
+=== I just keep getting the +513 RTC driver not running+ message
+
+For the real time clock support to work, you need the following three
+things
+
+* a kernel that is supported (e.g. 2.2 onwards)
+* enhanced RTC support compiled into the kernel
+* an +rtcfile+ directive in your 'chrony.conf' file
+
+== Microsoft Windows
+
+=== Does +chrony+ support Windows?
+
+No.  The +chronyc+ program (the command-line client used for configuring
++chronyd+ while it is running) has been successfully built and run under
+Cygwin in the past.  +chronyd+ is not portable, because part of it is
+very system-dependent.  It needs adapting to work with Windows'
+equivalent of the adjtimex() call, and it needs to be made to work as a
+service.
+
+=== Are there any plans to support Windows?
+
+We have no plans to do this.  Anyone is welcome to pick this work up and
+contribute it back to the project.
+
+== NTP-specific issues
+
+=== Can +chrony+ be driven from broadcast NTP servers?
+
+No, this NTP mode is not implemented yet.
+
+=== Can chronyd transmit broadcast NTP packets (e.g. to synchronise other computers on a private LAN)?
+
+Yes.  Starting from version 1.17, +chrony+ has this capability.
+
+=== Can +chrony+ keep the system clock a fixed offset away from real time?
+
+This is not possible as the program currently stands.
+
+=== What happens if the network connection is dropped without using +chronyc+'s +offline+ command first?
+
++chronyd+ will keep trying to access the server(s) that it thinks are online.
+When the network is connected again, it will take some time (on average half of
+the current polling interval) before new measurements are made and the clock is
+corrected. If the servers were set to offline and the +online+ command was
+issued when the network was connected, +chronyd+ would make new measurements
+immediately.
+
+The +auto_offline+ option to the +server+ entry in the 'chrony.conf' file may
+be useful to switch the servers to the offline state automatically.
+
+== Linux-specific issues
+
+=== I get +Could not open /dev/rtc, Device or resource busy+ in my syslog file
+
+Some other program running on the system may be using the device.
+
+== Solaris-specific issues
+
+=== I get an error message about not being able to open kvm to change dosynctodr
+
+(The dosynctodr variable controls whether Solaris couples the equivalent
+of its BIOS clock into its system clock at regular intervals).  The
+Solaris port of +chrony+ was developed in the Solaris 2.5 era.  Some
+aspect of the Solaris kernel has changed which prevents the same
+technique working.  We no longer have root access to any Solaris
+machines to work on this, and we are reliant on somebody developing the
+patch and testing it.

examples/chrony.spec

@@ -45,7 +45,6 @@ cp chrony.info* $RPM_BUILD_ROOT%{_infodir}
 %{_sbindir}/chronyd
 %{_bindir}/chronyc
 %{_infodir}/chrony.info*
-%{_mandir}/man1/chrony.1.gz
 %{_mandir}/man1/chronyc.1.gz
 %{_mandir}/man5/chrony.conf.5.gz
 %{_mandir}/man8/chronyd.8.gz

local.c

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
- * Copyright (C) Miroslav Lichvar  2011, 2014
+ * Copyright (C) Miroslav Lichvar  2011, 2014-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -564,6 +564,9 @@ LCL_NotifyLeap(int leap)
   LCL_ReadRawTime(&raw);
   LCL_CookTime(&raw, &cooked, NULL);
 
+  /* Smooth the leap second out */
+  SMT_Leap(&cooked, leap);
+
   /* Dispatch to all handlers as if the clock was stepped */
   invoke_parameter_change_handlers(&raw, &cooked, 0.0, -leap, LCL_ChangeStep);
 }

logging.h

@@ -94,6 +94,7 @@ typedef enum {
   LOGF_Sys,
   LOGF_SysGeneric,
   LOGF_SysLinux,
+  LOGF_SysMacOSX,
   LOGF_SysNetBSD,
   LOGF_SysSolaris,
   LOGF_SysSunOS,

main.c

@@ -347,6 +347,7 @@ int main
 (int argc, char **argv)
 {
   const char *conf_file = DEFAULT_CONF_FILE;
+  const char *progname = argv[0];
   char *user = NULL;
   int debug = 0, nofork = 0, address_family = IPADDR_UNSPEC;
   int do_init_rtc = 0, restarted = 0;
@@ -386,7 +387,7 @@ int main
     } else if (!strcmp("-v", *argv) || !strcmp("--version",*argv)) {
       /* This write to the terminal is OK, it comes before we turn into a daemon */
       printf("chronyd (chrony) version %s (%s)\n", CHRONY_VERSION, CHRONYD_FEATURES);
-      exit(0);
+      return 0;
     } else if (!strcmp("-n", *argv)) {
       nofork = 1;
     } else if (!strcmp("-d", *argv)) {
@@ -405,6 +406,10 @@ int main
       address_family = IPADDR_INET4;
     } else if (!strcmp("-6", *argv)) {
       address_family = IPADDR_INET6;
+    } else if (!strcmp("-h", *argv) || !strcmp("--help", *argv)) {
+      printf("Usage: %s [-4|-6] [-n|-d] [-q|-Q] [-r] [-R] [-s] [-f FILE|COMMAND...]\n",
+             progname);
+      return 0;
     } else if (*argv[0] == '-') {
       LOG_FATAL(LOGF_Main, "Unrecognized command line option [%s]", *argv);
     } else {
@@ -417,7 +422,7 @@ int main
   if (getuid() != 0) {
     /* This write to the terminal is OK, it comes before we turn into a daemon */
     fprintf(stderr,"Not superuser\n");
-    exit(1);
+    return 1;
   }
 
   /* Turn into a daemon */

make_release

@@ -39,7 +39,7 @@ echo $version > version.txt
 
 sed -i -e "s%@@VERSION@@%${version}%" examples/chrony.spec
 
-for m in chrony.1 chronyc.1.in chrony.conf.5.in chronyd.8.in; do
+for m in chronyc.1.in chrony.conf.5.in chronyd.8.in; do
   sed -e "s%@VERSION@%${version}%;s%@MAN_DATE@%${mandate}%" \
     < $m > ${m}_
   mv -f ${m}_ $m
@@ -59,15 +59,9 @@ if [ $(wc -l < INSTALL) -gt 100 -o $(wc -l < INSTALL) -lt 85 ]; then
   exit 3
 fi
 
-awk '/^[1-9] Frequently asked questions$/{p=1}
-     /^Appendix A GNU General Public License$/{exit}; p' chrony.txt | \
- tail -n +4 | sed 's/^[1-9]\.\([1-9]\)/\1/' | sed 's/^----/--/' | \
- sed 's/^====/==/' > FAQ
-
-if [ $(wc -l < FAQ) -gt 400 -o $(wc -l < FAQ) -lt 200 ]; then
-  echo "FAQ generated incorrectly?"
-  exit 3
-fi
+a2x --lynx -f text doc/faq.adoc || exit 1
+mv doc/faq.text FAQ
+rm -rf doc
 
 rm -f config.h config.log make_release .gitignore
 

ntp.h

@@ -109,4 +109,9 @@ typedef struct {
 #define NTP_LVM(leap, version, mode) \
   ((((leap) << 6) & 0xc0) | (((version) << 3) & 0x38) | ((mode) & 0x07))
 
+/* Special NTP reference IDs */
+#define NTP_REFID_UNSYNC 0x0UL
+#define NTP_REFID_LOCAL 0x7F7F0101UL /* 127.127.1.1 */
+#define NTP_REFID_SMOOTH 0x7F7F01FFUL /* 127.127.1.255 */
+
 #endif /* GOT_NTP_H */

ntp_core.c

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
- * Copyright (C) Miroslav Lichvar  2009-2014
+ * Copyright (C) Miroslav Lichvar  2009-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -316,7 +316,7 @@ NCR_Initialise(void)
   do_time_checks();
 
   logfileid = CNF_GetLogMeasurements() ? LOG_FileOpen("measurements",
-      "   Date (UTC) Time     IP Address   L St 123 567 ABCD  LP RP Score Offset     Peer del. Peer disp. Root del.  Root disp.")
+      "   Date (UTC) Time     IP Address   L St 123 567 ABCD  LP RP Score    Offset  Peer del. Peer disp.  Root del. Root disp.")
     : -1;
 
   access_auth_table = ADF_CreateTable();
@@ -789,8 +789,8 @@ transmit_packet(NTP_Mode my_mode, /* The mode this machine wants to be */
 
   /* Get current smoothing offset when sending packet to a client */
   if (SMT_IsEnabled() && (my_mode == MODE_SERVER || my_mode == MODE_BROADCAST)) {
-    smooth_time = 1;
     smooth_offset = SMT_GetOffset(&local_transmit);
+    smooth_time = fabs(smooth_offset) > LCL_GetSysPrecisionAsQuantum();
 
     /* Suppress leap second when smoothing and slew mode are enabled */
     if (REF_GetLeapMode() == REF_LeapModeSlew &&
@@ -801,6 +801,14 @@ transmit_packet(NTP_Mode my_mode, /* The mode this machine wants to be */
     smooth_offset = 0.0;
   }
 
+  if (smooth_time) {
+    our_ref_id = NTP_REFID_SMOOTH;
+    UTI_AddDoubleToTimeval(&our_ref_time, smooth_offset, &our_ref_time);
+    UTI_AddDoubleToTimeval(local_rx, smooth_offset, &local_receive);
+  } else {
+    local_receive = *local_rx;
+  }
+
   if (are_we_synchronised) {
     leap = (int) leap_status;
   } else {
@@ -824,17 +832,10 @@ transmit_packet(NTP_Mode my_mode, /* The mode this machine wants to be */
   message.root_delay = UTI_DoubleToInt32(our_root_delay);
   message.root_dispersion = UTI_DoubleToInt32(our_root_dispersion);
 
-  message.reference_id = htonl((NTP_int32) our_ref_id);
+  message.reference_id = htonl(our_ref_id);
 
   /* Now fill in timestamps */
 
-  if (smooth_time) {
-    UTI_AddDoubleToTimeval(&our_ref_time, smooth_offset, &our_ref_time);
-    UTI_AddDoubleToTimeval(local_rx, smooth_offset, &local_receive);
-  } else {
-    local_receive = *local_rx;
-  }
-
   UTI_TimevalToInt64(&our_ref_time, &message.reference_ts, 0);
 
   /* Originate - this comes from the last packet the source sent us */
@@ -1230,7 +1231,8 @@ receive_packet(NTP_Packet *message, struct timeval *now, double now_err, NCR_Ins
     inst->local_ntp_tx.hi = inst->local_ntp_tx.lo = 0;
 
   if (valid_packet) {
-    precision = LCL_GetSysPrecisionAsQuantum();
+    precision = LCL_GetSysPrecisionAsQuantum() +
+                UTI_Log2ToDouble(message->precision);
 
     SRC_GetFrequencyRange(inst->source, &source_freq_lo, &source_freq_hi);
     

ntp_io.c

@@ -4,7 +4,7 @@
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
  * Copyright (C) Timo Teras  2009
- * Copyright (C) Miroslav Lichvar  2009, 2013-2014
+ * Copyright (C) Miroslav Lichvar  2009, 2013-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -97,8 +97,13 @@ prepare_socket(int family, int port_number, int client_only)
   sock_fd = socket(family, SOCK_DGRAM, 0);
 
   if (sock_fd < 0) {
-    LOG(LOGS_ERR, LOGF_NtpIO, "Could not open %s NTP socket : %s",
-        family == AF_INET ? "IPv4" : "IPv6", strerror(errno));
+    if (!client_only) {
+      LOG(LOGS_ERR, LOGF_NtpIO, "Could not open %s NTP socket : %s",
+          family == AF_INET ? "IPv4" : "IPv6", strerror(errno));
+    } else {
+      DEBUG_LOG(LOGF_NtpIO, "Could not open %s NTP socket : %s",
+                family == AF_INET ? "IPv4" : "IPv6", strerror(errno));
+    }
     return INVALID_SOCK_FD;
   }
 

ntp_sources.c

@@ -49,6 +49,7 @@ typedef struct {
   NTP_Remote_Address *remote_addr; /* The address of this source, non-NULL
                                       means this slot in table is in use */
   NCR_Instance data;            /* Data for the protocol engine for this source */
+  char *name;                   /* Name of the source, may be NULL */
   int pool;                     /* Number of the pool from which was this source
                                    added or INVALID_POOL */
   int tentative;                /* Flag indicating there was no valid response
@@ -85,6 +86,7 @@ struct UnresolvedSource {
 #define RESOLVE_INTERVAL_UNIT 7
 #define MIN_RESOLVE_INTERVAL 2
 #define MAX_RESOLVE_INTERVAL 9
+#define MIN_REPLACEMENT_INTERVAL 8
 
 static struct UnresolvedSource *unresolved_sources = NULL;
 static int resolving_interval = 0;
@@ -92,15 +94,11 @@ static SCH_TimeoutID resolving_id;
 static struct UnresolvedSource *resolving_source = NULL;
 static NSR_SourceResolvingEndHandler resolving_end_handler = NULL;
 
-#define MIN_POOL_RESOLVE_INTERVAL 5
 #define MAX_POOL_SOURCES 16
 #define INVALID_POOL (-1)
 
-/* Pool of sources, the name is expected to resolve to multiple addresses
-   which change over time */
+/* Pool of sources with the same name */
 struct SourcePool {
-  char *name;
-  int port;
   /* Number of sources added from this pool (ignoring tentative sources) */
   int sources;
   /* Maximum number of sources */
@@ -115,6 +113,7 @@ static ARR_Instance pools;
 
 static void resolve_sources(void *arg);
 static void rehash_records(void);
+static void clean_source_record(SourceRecord *record);
 
 static void
 slew_sources(struct timeval *raw,
@@ -162,16 +161,12 @@ NSR_Finalise(void)
   struct UnresolvedSource *us;
   unsigned int i;
 
-  for (i = 0; i < ARR_GetSize(pools); i++)
-    Free(((struct SourcePool *)ARR_GetElement(pools, i))->name);
   ARR_DestroyInstance(pools);
 
   for (i = 0; i < ARR_GetSize(records); i++) {
     record = get_record(i);
-    if (!record->remote_addr)
-      continue;
-    record->remote_addr = NULL;
-    NCR_DestroyInstance(record->data);
+    if (record->remote_addr)
+      clean_source_record(record);
   }
 
   ARR_DestroyInstance(records);
@@ -296,7 +291,7 @@ rehash_records(void)
 
 /* Procedure to add a new source */
 static NSR_Status
-add_source(NTP_Remote_Address *remote_addr, NTP_Source_Type type, SourceParameters *params, int pool)
+add_source(NTP_Remote_Address *remote_addr, char *name, NTP_Source_Type type, SourceParameters *params, int pool)
 {
   SourceRecord *record;
   int slot, found;
@@ -323,6 +318,7 @@ add_source(NTP_Remote_Address *remote_addr, NTP_Source_Type type, SourceParamete
       record = get_record(slot);
       record->data = NCR_GetInstance(remote_addr, type, params);
       record->remote_addr = NCR_GetRemoteAddress(record->data);
+      record->name = name ? Strdup(name) : NULL;
       record->pool = pool;
       record->tentative = pool != INVALID_POOL ? 1 : 0;
 
@@ -373,7 +369,7 @@ process_resolved_name(struct UnresolvedSource *us, IPAddr *ip_addrs, int n_addrs
   int i, added;
 
   for (i = added = 0; i < n_addrs; i++) {
-    DEBUG_LOG(LOGF_NtpSources, "%s resolved to %s", us->name, UTI_IPToString(&ip_addrs[i]));
+    DEBUG_LOG(LOGF_NtpSources, "(%d) %s", i + 1, UTI_IPToString(&ip_addrs[i]));
 
     address.ip_addr = ip_addrs[i];
     address.port = us->port;
@@ -382,7 +378,7 @@ process_resolved_name(struct UnresolvedSource *us, IPAddr *ip_addrs, int n_addrs
       if (replace_source(&us->replace_source, &address) != NSR_AlreadyInUse)
         break;
     } else {
-      if (add_source(&address, us->new_source.type, &us->new_source.params,
+      if (add_source(&address, us->name, us->new_source.type, &us->new_source.params,
                      us->new_source.pool) == NSR_Success)
         added++;
 
@@ -403,6 +399,8 @@ name_resolve_handler(DNS_Status status, int n_addrs, IPAddr *ip_addrs, void *any
 
   assert(us == resolving_source);
 
+  DEBUG_LOG(LOGF_NtpSources, "%s resolved to %d addrs", us->name, n_addrs);
+
   switch (status) {
     case DNS_TryAgain:
       break;
@@ -495,7 +493,7 @@ append_unresolved_source(struct UnresolvedSource *us)
 NSR_Status
 NSR_AddSource(NTP_Remote_Address *remote_addr, NTP_Source_Type type, SourceParameters *params)
 {
-  return add_source(remote_addr, type, params, INVALID_POOL);
+  return add_source(remote_addr, NULL, type, params, INVALID_POOL);
 }
 
 /* ================================================== */
@@ -505,6 +503,15 @@ NSR_AddSourceByName(char *name, int port, int pool, NTP_Source_Type type, Source
 {
   struct UnresolvedSource *us;
   struct SourcePool *sp;
+  NTP_Remote_Address remote_addr;
+
+  /* If the name is an IP address, don't bother with full resolving now
+     or later when trying to replace the source */
+  if (UTI_StringToIP(name, &remote_addr.ip_addr)) {
+    remote_addr.port = port;
+    NSR_AddSource(&remote_addr, type, params);
+    return;
+  }
 
   us = MallocNew(struct UnresolvedSource);
   us->name = Strdup(name);
@@ -518,8 +525,6 @@ NSR_AddSourceByName(char *name, int port, int pool, NTP_Source_Type type, Source
     us->new_source.max_new_sources = 1;
   } else {
     sp = (struct SourcePool *)ARR_GetNewElement(pools);
-    sp->name = Strdup(name);
-    sp->port = port;
     sp->sources = 0;
     sp->max_sources = params->max_sources;
     us->new_source.pool = ARR_GetSize(pools) - 1;
@@ -587,6 +592,8 @@ clean_source_record(SourceRecord *record)
   assert(record->remote_addr);
   record->remote_addr = NULL;
   NCR_DestroyInstance(record->data);
+  if (record->name)
+    Free(record->name);
 
   n_sources--;
 }
@@ -640,15 +647,18 @@ NSR_RemoveAllSources(void)
 /* ================================================== */
 
 static void
-resolve_pool_replacement(struct SourcePool *sp, NTP_Remote_Address *addr)
+resolve_source_replacement(SourceRecord *record)
 {
   struct UnresolvedSource *us;
 
+  DEBUG_LOG(LOGF_NtpSources, "trying to replace %s",
+            UTI_IPToString(&record->remote_addr->ip_addr));
+
   us = MallocNew(struct UnresolvedSource);
-  us->name = Strdup(sp->name);
-  us->port = sp->port;
+  us->name = Strdup(record->name);
+  us->port = record->remote_addr->port;
   us->replacement = 1;
-  us->replace_source = *addr;
+  us->replace_source = *record->remote_addr;
 
   append_unresolved_source(us);
   NSR_ResolveSources();
@@ -662,32 +672,33 @@ NSR_HandleBadSource(IPAddr *address)
   static struct timeval last_replacement;
   struct timeval now;
   NTP_Remote_Address remote_addr;
-  struct SourcePool *pool;
-  int pool_index, slot, found;
+  SourceRecord *record;
+  int slot, found;
   double diff;
 
   remote_addr.ip_addr = *address;
   remote_addr.port = 0;
 
-  /* Only sources from a pool can be replaced */
   find_slot(&remote_addr, &slot, &found);
-  if (!found || (pool_index = get_record(slot)->pool) == INVALID_POOL)
+  if (!found)
     return;
 
-  pool = (struct SourcePool *)ARR_GetElement(pools, pool_index);
+  record = get_record(slot);
 
-  /* Don't resolve the pool name too frequently */
+  /* Only sources with a name can be replaced */
+  if (!record->name)
+    return;
+
+  /* Don't resolve names too frequently */
   SCH_GetLastEventTime(NULL, NULL, &now);
   UTI_DiffTimevalsToDouble(&diff, &now, &last_replacement);
-  if (fabs(diff) < RESOLVE_INTERVAL_UNIT * (1 << MIN_POOL_RESOLVE_INTERVAL)) {
+  if (fabs(diff) < RESOLVE_INTERVAL_UNIT * (1 << MIN_REPLACEMENT_INTERVAL)) {
     DEBUG_LOG(LOGF_NtpSources, "replacement postponed");
     return;
   }
   last_replacement = now;
 
-  DEBUG_LOG(LOGF_NtpSources, "pool replacement for %s", UTI_IPToString(address));
-
-  resolve_pool_replacement(pool, &remote_addr);
+  resolve_source_replacement(record);
 }
 
 /* ================================================== */
@@ -741,7 +752,7 @@ NSR_ProcessReceive(NTP_Packet *message, struct timeval *now, double now_err, NTP
       pool->sources++;
 
       DEBUG_LOG(LOGF_NtpSources, "pool %s has %d confirmed sources",
-                pool->name, pool->sources);
+                record->name, pool->sources);
 
       /* If the number of sources reached the configured maximum, remove
          the tentative sources added from this pool */

pktlength.c

@@ -44,9 +44,8 @@ command_unpadded_length(CMD_Request *r)
     return 0;
   } else {
     switch (type) {
-      
       case REQ_NULL:
-        return offsetof(CMD_Request, data);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_ONLINE:
         return offsetof(CMD_Request, data.online.EOR);
       case REQ_OFFLINE:
@@ -78,11 +77,11 @@ command_unpadded_length(CMD_Request *r)
       case REQ_MANUAL :
         return offsetof(CMD_Request, data.manual.EOR);
       case REQ_N_SOURCES :
-        return offsetof(CMD_Request, data.n_sources.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_SOURCE_DATA :
         return offsetof(CMD_Request, data.source_data.EOR);
       case REQ_REKEY :
-        return offsetof(CMD_Request, data.rekey.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_ALLOW :
         return offsetof(CMD_Request, data.allow_deny.EOR);
       case REQ_ALLOWALL :
@@ -110,21 +109,21 @@ command_unpadded_length(CMD_Request *r)
       case REQ_DEL_SOURCE :
         return offsetof(CMD_Request, data.del_source.EOR);
       case REQ_WRITERTC :
-        return offsetof(CMD_Request, data.writertc.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_DFREQ :
         return offsetof(CMD_Request, data.dfreq.EOR);
       case REQ_DOFFSET :
         return offsetof(CMD_Request, data.doffset.EOR);
       case REQ_TRACKING :
-        return offsetof(CMD_Request, data.tracking.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_SOURCESTATS :
         return offsetof(CMD_Request, data.sourcestats.EOR);
       case REQ_RTCREPORT :
-        return offsetof(CMD_Request, data.rtcreport.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_TRIMRTC :
-        return offsetof(CMD_Request, data.trimrtc.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_CYCLELOGS :
-        return offsetof(CMD_Request, data.cyclelogs.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_SUBNETS_ACCESSED :
       case REQ_CLIENT_ACCESSES:
         /* No longer supported */
@@ -132,21 +131,25 @@ command_unpadded_length(CMD_Request *r)
       case REQ_CLIENT_ACCESSES_BY_INDEX:
         return offsetof(CMD_Request, data.client_accesses_by_index.EOR);
       case REQ_MANUAL_LIST:
-        return offsetof(CMD_Request, data.manual_list.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_MANUAL_DELETE:
         return offsetof(CMD_Request, data.manual_delete.EOR);
       case REQ_MAKESTEP:
-        return offsetof(CMD_Request, data.make_step.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_ACTIVITY:
-        return offsetof(CMD_Request, data.activity.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_RESELECT:
-        return offsetof(CMD_Request, data.reselect.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_RESELECTDISTANCE:
         return offsetof(CMD_Request, data.reselect_distance.EOR);
       case REQ_MODIFY_MINSTRATUM:
         return offsetof(CMD_Request, data.modify_minstratum.EOR);
       case REQ_MODIFY_POLLTARGET:
         return offsetof(CMD_Request, data.modify_polltarget.EOR);
+      case REQ_SMOOTHING:
+        return offsetof(CMD_Request, data.null.EOR);
+      case REQ_SMOOTHTIME:
+        return offsetof(CMD_Request, data.smoothtime.EOR);
       default:
         /* If we fall through the switch, it most likely means we've forgotten to implement a new case */
         assert(0);
@@ -228,11 +231,11 @@ PKL_CommandPaddingLength(CMD_Request *r)
     case REQ_MANUAL:
       return PADDING_LENGTH(data.manual.EOR, data.null.EOR);
     case REQ_N_SOURCES:
-      return PADDING_LENGTH(data.n_sources.EOR, data.n_sources.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.n_sources.EOR);
     case REQ_SOURCE_DATA:
       return PADDING_LENGTH(data.source_data.EOR, data.source_data.EOR);
     case REQ_REKEY:
-      return PADDING_LENGTH(data.rekey.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_ALLOW:
       return PADDING_LENGTH(data.allow_deny.EOR, data.null.EOR);
     case REQ_ALLOWALL:
@@ -260,21 +263,21 @@ PKL_CommandPaddingLength(CMD_Request *r)
     case REQ_DEL_SOURCE:
       return PADDING_LENGTH(data.del_source.EOR, data.null.EOR);
     case REQ_WRITERTC:
-      return PADDING_LENGTH(data.writertc.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_DFREQ:
       return PADDING_LENGTH(data.dfreq.EOR, data.null.EOR);
     case REQ_DOFFSET:
       return PADDING_LENGTH(data.doffset.EOR, data.null.EOR);
     case REQ_TRACKING:
-      return PADDING_LENGTH(data.tracking.EOR, data.tracking.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.tracking.EOR);
     case REQ_SOURCESTATS:
       return PADDING_LENGTH(data.sourcestats.EOR, data.sourcestats.EOR);
     case REQ_RTCREPORT:
-      return PADDING_LENGTH(data.rtcreport.EOR, data.rtc.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.rtc.EOR);
     case REQ_TRIMRTC:
-      return PADDING_LENGTH(data.trimrtc.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_CYCLELOGS:
-      return PADDING_LENGTH(data.cyclelogs.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_SUBNETS_ACCESSED:
     case REQ_CLIENT_ACCESSES:
       /* No longer supported */
@@ -282,21 +285,25 @@ PKL_CommandPaddingLength(CMD_Request *r)
     case REQ_CLIENT_ACCESSES_BY_INDEX:
       return PADDING_LENGTH(data.client_accesses_by_index.EOR, data.client_accesses_by_index.EOR);
     case REQ_MANUAL_LIST:
-      return PADDING_LENGTH(data.manual_list.EOR, data.manual_list.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.manual_list.EOR);
     case REQ_MANUAL_DELETE:
       return PADDING_LENGTH(data.manual_delete.EOR, data.null.EOR);
     case REQ_MAKESTEP:
-      return PADDING_LENGTH(data.make_step.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_ACTIVITY:
-      return PADDING_LENGTH(data.activity.EOR, data.activity.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.activity.EOR);
     case REQ_RESELECT:
-      return PADDING_LENGTH(data.reselect.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_RESELECTDISTANCE:
       return PADDING_LENGTH(data.reselect_distance.EOR, data.null.EOR);
     case REQ_MODIFY_MINSTRATUM:
       return PADDING_LENGTH(data.modify_minstratum.EOR, data.null.EOR);
     case REQ_MODIFY_POLLTARGET:
       return PADDING_LENGTH(data.modify_polltarget.EOR, data.null.EOR);
+    case REQ_SMOOTHING:
+      return PADDING_LENGTH(data.null.EOR, data.smoothing.EOR);
+    case REQ_SMOOTHTIME:
+      return PADDING_LENGTH(data.smoothtime.EOR, data.null.EOR);
     default:
       /* If we fall through the switch, it most likely means we've forgotten to implement a new case */
       assert(0);
@@ -360,7 +367,8 @@ PKL_ReplyLength(CMD_Reply *r)
         }
       case RPY_ACTIVITY:
         return offsetof(CMD_Reply, data.activity.EOR);
-        
+      case RPY_SMOOTHING:
+        return offsetof(CMD_Reply, data.smoothing.EOR);
       default:
         assert(0);
     }

refclock.c

@@ -499,15 +499,6 @@ RCL_AddPulse(RCL_Instance instance, struct timeval *pulse_time, double second)
   return 1;
 }
 
-static double
-poll_interval(int poll)
-{
-  if (poll >= 0)
-    return 1 << poll;
-  else
-    return 1.0 / (1 << -poll);
-}
-
 static int
 valid_sample_time(RCL_Instance instance, struct timeval *tv)
 {
@@ -516,7 +507,7 @@ valid_sample_time(RCL_Instance instance, struct timeval *tv)
 
   LCL_ReadRawTime(&raw_time);
   UTI_DiffTimevalsToDouble(&diff, &raw_time, tv);
-  if (diff < 0.0 || diff > poll_interval(instance->poll + 1)) {
+  if (diff < 0.0 || diff > UTI_Log2ToDouble(instance->poll + 1)) {
     DEBUG_LOG(LOGF_Refclock, "%s refclock sample not valid age=%.6f tv=%s",
         UTI_RefidToString(instance->ref_id), diff, UTI_TimevalToString(tv));
     return 0;
@@ -595,7 +586,7 @@ poll_timeout(void *arg)
     }
   }
 
-  inst->timeout_id = SCH_AddTimeoutByDelay(poll_interval(poll), poll_timeout, arg);
+  inst->timeout_id = SCH_AddTimeoutByDelay(UTI_Log2ToDouble(poll), poll_timeout, arg);
 }
 
 static void

reference.c

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
- * Copyright (C) Miroslav Lichvar  2009-2014
+ * Copyright (C) Miroslav Lichvar  2009-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -120,11 +120,6 @@ static LOG_FileID logfileid;
 
 /* ================================================== */
 
-/* Reference ID supplied when we are locally referenced */
-#define LOCAL_REFERENCE_ID 0x7f7f0101UL
-
-/* ================================================== */
-
 /* Exponential moving averages of absolute clock frequencies
    used as a fallback when synchronisation is lost. */
 
@@ -248,9 +243,9 @@ REF_Initialise(void)
 
   leap_tzname = CNF_GetLeapSecTimezone();
   if (leap_tzname) {
-    /* Check that the timezone has good data for Jun 30 2008 and Dec 31 2008 */
-    if (get_tz_leap(1214784000) == LEAP_Normal &&
-        get_tz_leap(1230681600) == LEAP_InsertSecond) {
+    /* Check that the timezone has good data for Jun 30 2012 and Dec 31 2012 */
+    if (get_tz_leap(1341014400) == LEAP_InsertSecond &&
+        get_tz_leap(1356912000) == LEAP_Normal) {
       LOG(LOGS_INFO, LOGF_Reference, "Using %s timezone to obtain leap second data", leap_tzname);
     } else {
       LOG(LOGS_WARN, LOGF_Reference, "Timezone %s failed leap second check, ignoring", leap_tzname);
@@ -1109,12 +1104,10 @@ REF_SetManualReference
  double skew
 )
 {
-  uint32_t manual_refid = 0x4D414E55; /* MANU */
-
   /* We are not synchronised to an external source, as such.  This is
-   only supposed to be used with the local source option, really
-   ... */
-  REF_SetReference(0, LEAP_Unsynchronised, 1, manual_refid, NULL,
+     only supposed to be used with the local source option, really.
+     Log as MANU in the tracking log, packets will have NTP_REFID_LOCAL. */
+  REF_SetReference(0, LEAP_Unsynchronised, 1, 0x4D414E55UL, NULL,
                    ref_time, offset, 0.0, frequency, skew, 0.0, 0.0);
 }
 
@@ -1200,7 +1193,7 @@ REF_GetReferenceParams
     *is_synchronised = 1;
 
     *stratum = local_stratum;
-    *ref_id = LOCAL_REFERENCE_ID;
+    *ref_id = NTP_REFID_LOCAL;
     /* Make the reference time be now less a second - this will
        scarcely affect the client, but will ensure that the transmit
        timestamp cannot come before this (which would cause test 7 to
@@ -1222,7 +1215,7 @@ REF_GetReferenceParams
 
     *leap_status = LEAP_Unsynchronised;
     *stratum = NTP_MAX_STRATUM;
-    *ref_id = 0;
+    *ref_id = NTP_REFID_UNSYNC;
     ref_time->tv_sec = ref_time->tv_usec = 0;
     /* These values seem to be standard for a client, and
        any peer or client of ours will ignore them anyway because
@@ -1336,7 +1329,7 @@ REF_GetTrackingReport(RPT_TrackingReport *rep)
   LCL_GetOffsetCorrection(&now_raw, &correction, NULL);
   UTI_AddDoubleToTimeval(&now_raw, correction, &now_cooked);
 
-  rep->ref_id = 0;
+  rep->ref_id = NTP_REFID_UNSYNC;
   rep->ip_addr.family = IPADDR_UNSPEC;
   rep->stratum = 0;
   rep->leap_status = our_leap_status;
@@ -1368,7 +1361,7 @@ REF_GetTrackingReport(RPT_TrackingReport *rep)
 
   } else if (enable_local_stratum) {
 
-    rep->ref_id = LOCAL_REFERENCE_ID;
+    rep->ref_id = NTP_REFID_LOCAL;
     rep->ip_addr.family = IPADDR_UNSPEC;
     rep->stratum = local_stratum;
     rep->ref_time = now_cooked;

reports.h

@@ -112,4 +112,14 @@ typedef struct {
   int unresolved;
 } RPT_ActivityReport;
 
+typedef struct {
+  int active;
+  int leap_only;
+  double offset;
+  double freq_ppm;
+  double wander_ppm;
+  double last_update_ago;
+  double remaining_time;
+} RPT_SmoothingReport;
+
 #endif /* GOT_REPORTS_H */

sched.c

@@ -330,6 +330,10 @@ SCH_AddTimeoutByDelay(double delay, SCH_TimeoutHandler handler, SCH_ArbitraryArg
 
   LCL_ReadRawTime(&now);
   UTI_AddDoubleToTimeval(&now, delay, &then);
+  if (UTI_CompareTimevals(&now, &then) > 0) {
+    LOG_FATAL(LOGF_Scheduler, "Timeout overflow");
+  }
+
   return SCH_AddTimeout(&then, handler, arg);
 
 }

smooth.c

@@ -77,6 +77,10 @@ static struct stage stages[NUM_STAGES];
 /* Enabled/disabled smoothing */
 static int enabled;
 
+/* Enabled/disabled mode where only leap seconds are smoothed out and normal
+   offset/frequency changes are ignored */
+static int leap_only_mode;
+
 /* Maximum skew/max_wander ratio to start updating offset and frequency */
 #define UNLOCK_SKEW_WANDER_RATIO 10000
 
@@ -93,15 +97,17 @@ static struct timeval last_update;
 
 
 static void
-get_offset_freq(struct timeval *now, double *offset, double *freq)
+get_smoothing(struct timeval *now, double *poffset, double *pfreq,
+              double *pwander)
 {
-  double elapsed, length;
+  double elapsed, length, offset, freq, wander;
   int i;
 
   UTI_DiffTimevalsToDouble(&elapsed, now, &last_update);
 
-  *offset = smooth_offset;
-  *freq = smooth_freq;
+  offset = smooth_offset;
+  freq = smooth_freq;
+  wander = 0.0;
 
   for (i = 0; i < NUM_STAGES; i++) {
     if (elapsed <= 0.0)
@@ -111,13 +117,21 @@ get_offset_freq(struct timeval *now, double *offset, double *freq)
     if (length >= elapsed)
       length = elapsed;
 
-    *offset -= length * (2.0 * *freq + stages[i].wander * length) / 2.0;
-    *freq += stages[i].wander * length;
+    wander = stages[i].wander;
+    offset -= length * (2.0 * freq + wander * length) / 2.0;
+    freq += wander * length;
     elapsed -= length;
   }
 
-  if (elapsed > 0.0)
-    *offset -= elapsed * *freq;
+  if (elapsed > 0.0) {
+    wander = 0.0;
+    offset -= elapsed * freq;
+  }
+
+  *poffset = offset;
+  *pfreq = freq;
+  if (pwander)
+    *pwander = wander;
 }
 
 static void
@@ -185,14 +199,12 @@ update_smoothing(struct timeval *now, double offset, double freq)
 {
   /* Don't accept offset/frequency until the clock has stabilized */
   if (locked) {
-    if (REF_GetSkew() / max_wander < UNLOCK_SKEW_WANDER_RATIO) {
-      LOG(LOGS_INFO, LOGF_Smooth, "Time smoothing activated");
-      locked = 0;
-    }
+    if (REF_GetSkew() / max_wander < UNLOCK_SKEW_WANDER_RATIO || leap_only_mode)
+      SMT_Activate(now);
     return;
   }
 
-  get_offset_freq(now, &smooth_offset, &smooth_freq);
+  get_smoothing(now, &smooth_offset, &smooth_freq, NULL);
   smooth_offset += offset;
   smooth_freq = (smooth_freq - freq) / (1.0 - freq);
   last_update = *now;
@@ -208,15 +220,19 @@ handle_slew(struct timeval *raw, struct timeval *cooked, double dfreq,
 {
   double delta;
 
-  if (change_type == LCL_ChangeAdjust)
-    update_smoothing(cooked, doffset, dfreq);
+  if (change_type == LCL_ChangeAdjust) {
+    if (leap_only_mode)
+      update_smoothing(cooked, 0.0, 0.0);
+    else
+      update_smoothing(cooked, doffset, dfreq);
+  }
 
   UTI_AdjustTimeval(&last_update, cooked, &last_update, &delta, dfreq, doffset);
 }
 
 void SMT_Initialise(void)
 {
-  CNF_GetSmooth(&max_freq, &max_wander);
+  CNF_GetSmooth(&max_freq, &max_wander, &leap_only_mode);
   if (max_freq <= 0.0 || max_wander <= 0.0) {
       enabled = 0;
       return;
@@ -249,19 +265,78 @@ SMT_GetOffset(struct timeval *now)
   if (!enabled)
     return 0.0;
   
-  get_offset_freq(now, &offset, &freq);
+  get_smoothing(now, &offset, &freq, NULL);
 
   return offset;
 }
 
+void
+SMT_Activate(struct timeval *now)
+{
+  if (!enabled || !locked)
+    return;
+
+  LOG(LOGS_INFO, LOGF_Smooth, "Time smoothing activated%s", leap_only_mode ?
+      " (leap seconds only)" : "");
+  locked = 0;
+  last_update = *now;
+}
+
 void
 SMT_Reset(struct timeval *now)
 {
+  int i;
+
   if (!enabled)
     return;
 
-  locked = 1;
   smooth_offset = 0.0;
   smooth_freq = 0.0;
   last_update = *now;
+
+  for (i = 0; i < NUM_STAGES; i++)
+    stages[i].wander = stages[i].length = 0.0;
+}
+
+void
+SMT_Leap(struct timeval *now, int leap)
+{
+  /* When the leap-only mode is disabled, the leap second will be accumulated
+     in handle_slew() as a normal offset */
+  if (!enabled || !leap_only_mode)
+    return;
+
+  update_smoothing(now, leap, 0.0);
+}
+
+int
+SMT_GetSmoothingReport(RPT_SmoothingReport *report, struct timeval *now)
+{
+  double length, elapsed;
+  int i;
+
+  if (!enabled)
+    return 0;
+
+  report->active = !locked;
+  report->leap_only = leap_only_mode;
+
+  get_smoothing(now, &report->offset, &report->freq_ppm, &report->wander_ppm);
+
+  /* Convert to ppm and negate (positive values mean faster/speeding up) */
+  report->freq_ppm *= -1.0e6;
+  report->wander_ppm *= -1.0e6;
+
+  UTI_DiffTimevalsToDouble(&elapsed, now, &last_update);
+  if (!locked && elapsed >= 0.0) {
+    for (i = 0, length = 0.0; i < NUM_STAGES; i++)
+      length += stages[i].length;
+    report->last_update_ago = elapsed;
+    report->remaining_time = elapsed < length ? length - elapsed : 0.0;
+  } else {
+    report->last_update_ago = 0.0;
+    report->remaining_time = 0.0;
+  }
+
+  return 1;
 }

smooth.h

@@ -27,6 +27,8 @@
 #ifndef GOT_SMOOTH_H
 #define GOT_SMOOTH_H
 
+#include "reports.h"
+
 extern void SMT_Initialise(void);
 
 extern void SMT_Finalise(void);
@@ -35,6 +37,12 @@ extern int SMT_IsEnabled(void);
 
 extern double SMT_GetOffset(struct timeval *now);
 
+extern void SMT_Activate(struct timeval *now);
+
 extern void SMT_Reset(struct timeval *now);
 
+extern void SMT_Leap(struct timeval *now, int leap);
+
+extern int SMT_GetSmoothingReport(RPT_SmoothingReport *report, struct timeval *now);
+
 #endif

sources.c

@@ -513,7 +513,7 @@ combine_sources(int n_sel_sources, struct timeval *ref_time, double *offset,
 {
   struct timeval src_ref_time;
   double src_offset, src_offset_sd, src_frequency, src_skew;
-  double src_root_delay, src_root_dispersion, elapsed;
+  double src_root_delay, src_root_dispersion, sel_src_distance, elapsed;
   double offset_weight, sum_offset_weight, sum_offset, sum2_offset_sd;
   double frequency_weight, sum_frequency_weight, sum_frequency, inv_sum2_skew;
   int i, index, combined;
@@ -524,6 +524,10 @@ combine_sources(int n_sel_sources, struct timeval *ref_time, double *offset,
   sum_offset_weight = sum_offset = sum2_offset_sd = 0.0;
   sum_frequency_weight = sum_frequency = inv_sum2_skew = 0.0;
 
+  sel_src_distance = sources[selected_source_index]->sel_info.root_distance;
+  if (sources[selected_source_index]->type == SRC_NTP)
+    sel_src_distance += reselect_distance;
+
   for (i = combined = 0; i < n_sel_sources; i++) {
     index = sel_sources[i];
     SST_GetTrackingData(sources[index]->stats, &src_ref_time,
@@ -536,8 +540,7 @@ combine_sources(int n_sel_sources, struct timeval *ref_time, double *offset,
        are not close, or it was recently marked as distant */
 
     if (index != selected_source_index &&
-        (sources[index]->sel_info.root_distance > combine_limit *
-           (reselect_distance + sources[selected_source_index]->sel_info.root_distance) ||
+        (sources[index]->sel_info.root_distance > combine_limit * sel_src_distance ||
          fabs(*frequency - src_frequency) >
            combine_limit * (*skew + src_skew + LCL_GetMaxClockError()))) {
       /* Use a smaller penalty in first few updates */
@@ -804,43 +807,6 @@ SRC_SelectSource(SRC_Instance updated_inst)
     }
   }
 
-#if 0
-  /* We now have a list of indices for the sources which pass the
-     false-ticker test.  Now go on to reject those whose variance is
-     greater than the minimum distance of any other */
-
-  /* Find minimum distance */
-  index = sel_sources[0];
-  min_distance = sources[index]->sel_info.root_distance;
-  for (i = 1; i < n_sel_sources; i++) {
-    index = sel_sources[i];
-    distance = sources[index]->sel_info.root_distance;
-    if (distance < min_distance) {
-      min_distance = distance;
-    }
-  }
-
-  /* Now go through and prune any NTP sources that have excessive
-     variance */
-  for (i = 0; i < n_sel_sources; i++) {
-    index = sel_sources[i];
-    if (sources[index]->type == SRC_NTP &&
-        sqrt(sources[index]->sel_info.variance) > min_distance) {
-      sel_sources[i] = INVALID_SOURCE;
-      sources[index]->status = SRC_JITTERY;
-    }
-  }
-
-  /* Now crunch the list and mark all sources as selectable */
-  for (i = j = 0; i < n_sel_sources; i++) {
-    index = sel_sources[i];
-    if (index == INVALID_SOURCE)
-      continue;
-    sel_sources[j++] = index;
-  }
-  n_sel_sources = j;
-#endif
-
   if (n_sel_sources == 0 || n_sel_sources < CNF_GetMinSources()) {
     if (selected_source_index != INVALID_SOURCE) {
       log_selection_message("Can't synchronise: %s selectable sources",
@@ -869,16 +835,18 @@ SRC_SelectSource(SRC_Instance updated_inst)
 
   /* If there are any sources with prefer option, reduce the list again
      only to the preferred sources */
-  for (i = j = 0; i < n_sel_sources; i++) {
+  for (i = 0; i < n_sel_sources; i++) {
     if (sources[sel_sources[i]]->sel_option == SRC_SelectPrefer)
-      sel_sources[j++] = sel_sources[i];
+      break;
   }
-
-  if (j > 0) {
-    for (i = 0; i < n_sel_sources; i++) {
+  if (i < n_sel_sources) {
+    for (i = j = 0; i < n_sel_sources; i++) {
       if (sources[sel_sources[i]]->sel_option != SRC_SelectPrefer)
         sources[sel_sources[i]]->status = SRC_NONPREFERRED;
+      else
+        sel_sources[j++] = sel_sources[i];
     }
+    assert(j > 0);
     n_sel_sources = j;
     sel_prefer = 1;
   } else {

sys.c

@@ -46,6 +46,10 @@
 #include "sys_netbsd.h"
 #endif
 
+#if defined (MACOSX)
+#include "sys_macosx.h"
+#endif
+
 /* ================================================== */
 
 void
@@ -68,6 +72,10 @@ SYS_Initialise(void)
   SYS_NetBSD_Initialise();
 #endif
 
+#if defined(MACOSX)
+  SYS_MacOSX_Initialise();
+#endif
+
 }
 
 /* ================================================== */
@@ -91,6 +99,10 @@ SYS_Finalise(void)
 #if defined(__NetBSD__)
   SYS_NetBSD_Finalise();
 #endif
+
+#if defined(MACOSX)
+  SYS_MacOSX_Finalise();
+#endif
 }
 
 /* ================================================== */

sys_generic.c

@@ -107,6 +107,18 @@ handle_step(struct timeval *raw, struct timeval *cooked, double dfreq,
   }
 }
 
+/* ================================================== */
+
+static double
+clamp_freq(double freq)
+{
+  if (freq > max_freq)
+    return max_freq;
+  if (freq < -max_freq)
+    return -max_freq;
+  return freq;
+}
+
 /* ================================================== */
 /* End currently running slew and start a new one */
 
@@ -144,11 +156,7 @@ update_slew(void)
     corr_freq = max_corr_freq;
 
   /* Get the new real frequency and clamp it */
-  total_freq = base_freq + corr_freq * (1.0e6 - base_freq);
-  if (total_freq > max_freq)
-    total_freq = max_freq;
-  else if (total_freq < -max_freq)
-    total_freq = -max_freq;
+  total_freq = clamp_freq(base_freq + corr_freq * (1.0e6 - base_freq));
 
   /* Set the new frequency (the actual frequency returned by the call may be
      slightly different from the requested frequency due to rounding) */
@@ -330,7 +338,7 @@ SYS_Generic_Finalise(void)
     slew_timer_running = 0;
   }
 
-  (*drv_set_freq)(base_freq);
+  (*drv_set_freq)(clamp_freq(base_freq));
 }
 
 /* ================================================== */

sys_macosx.c

@@ -0,0 +1,314 @@
+/*
+  chronyd/chronyc - Programs for keeping computer clocks accurate.
+
+ **********************************************************************
+ * Copyright (C) Richard P. Curnow  1997-2001
+ * Copyright (C) J. Hannken-Illjes  2001
+ * Copyright (C) Bryan Christianson 2015
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ **********************************************************************
+
+  =======================================================================
+
+  Driver file for the MacOS X operating system.
+
+  */
+
+#include "config.h"
+
+#ifdef MACOSX
+
+#include <sys/sysctl.h>
+#include <sys/time.h>
+
+#include <nlist.h>
+#include <fcntl.h>
+#include <assert.h>
+#include <sys/time.h>
+
+#include <stdio.h>
+#include <signal.h>
+
+#include "sys_macosx.h"
+#include "localp.h"
+#include "logging.h"
+#include "util.h"
+
+/* ================================================== */
+
+/* This register contains the number of seconds by which the local
+   clock was estimated to be fast of reference time at the epoch when
+   gettimeofday() returned T0 */
+
+static double offset_register;
+
+/* This register contains the epoch to which the offset is referenced */
+
+static struct timeval T0;
+
+/* This register contains the current estimate of the system
+   frequency, in absolute (NOT ppm) */
+
+static double current_freq;
+
+/* This register contains the number of seconds of adjustment that
+   were passed to adjtime last time it was called. */
+
+static double adjustment_requested;
+
+/* Kernel parameters to calculate adjtime error. */
+
+static int kern_tickadj;
+static long kern_bigadj;
+
+/* ================================================== */
+
+static void
+clock_initialise(void)
+{
+  struct timeval newadj, oldadj;
+
+  offset_register = 0.0;
+  adjustment_requested = 0.0;
+  current_freq = 0.0;
+
+  if (gettimeofday(&T0, NULL) < 0) {
+    LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
+  }
+
+  newadj.tv_sec = 0;
+  newadj.tv_usec = 0;
+
+  if (adjtime(&newadj, &oldadj) < 0) {
+    LOG_FATAL(LOGF_SysMacOSX, "adjtime() failed");
+  }
+}
+
+/* ================================================== */
+
+static void
+clock_finalise(void)
+{
+  /* Nothing to do yet */
+}
+
+/* ================================================== */
+
+static void
+start_adjust(void)
+{
+  struct timeval newadj, oldadj;
+  struct timeval T1;
+  double elapsed, accrued_error;
+  double adjust_required;
+  struct timeval exact_newadj;
+  long delta, tickdelta;
+  double rounding_error;
+  double old_adjust_remaining;
+
+  /* Determine the amount of error built up since the last adjustment */
+  if (gettimeofday(&T1, NULL) < 0) {
+    LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
+  }
+
+  UTI_DiffTimevalsToDouble(&elapsed, &T1, &T0);
+  accrued_error = elapsed * current_freq;
+
+  adjust_required = - (accrued_error + offset_register);
+
+  UTI_DoubleToTimeval(adjust_required, &exact_newadj);
+
+  /* At this point, we need to round the required adjustment the
+     same way the kernel does. */
+
+  delta = exact_newadj.tv_sec * 1000000 + exact_newadj.tv_usec;
+  if (delta > kern_bigadj || delta < -kern_bigadj)
+    tickdelta = 10 * kern_tickadj;
+  else
+    tickdelta = kern_tickadj;
+  if (delta % tickdelta)
+	delta = delta / tickdelta * tickdelta;
+  newadj.tv_sec = 0;
+  newadj.tv_usec = (int)delta;
+  UTI_NormaliseTimeval(&newadj);
+
+  /* Add rounding error back onto offset register. */
+  UTI_DiffTimevalsToDouble(&rounding_error, &newadj, &exact_newadj);
+
+  if (adjtime(&newadj, &oldadj) < 0) {
+    LOG_FATAL(LOGF_SysMacOSX, "adjtime() failed");
+  }
+
+  UTI_TimevalToDouble(&oldadj, &old_adjust_remaining);
+
+  offset_register = rounding_error - old_adjust_remaining;
+
+  T0 = T1;
+  UTI_TimevalToDouble(&newadj, &adjustment_requested);
+}
+
+/* ================================================== */
+
+static void
+stop_adjust(void)
+{
+  struct timeval T1;
+  struct timeval zeroadj, remadj;
+  double adjustment_remaining, adjustment_achieved;
+  double elapsed, elapsed_plus_adjust;
+
+  zeroadj.tv_sec = 0;
+  zeroadj.tv_usec = 0;
+
+  if (adjtime(&zeroadj, &remadj) < 0) {
+    LOG_FATAL(LOGF_SysMacOSX, "adjtime() failed");
+  }
+
+  if (gettimeofday(&T1, NULL) < 0) {
+    LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
+  }
+
+  UTI_DiffTimevalsToDouble(&elapsed, &T1, &T0);
+  UTI_TimevalToDouble(&remadj, &adjustment_remaining);
+
+  adjustment_achieved = adjustment_requested - adjustment_remaining;
+  elapsed_plus_adjust = elapsed - adjustment_achieved;
+
+  offset_register += current_freq * elapsed_plus_adjust - adjustment_remaining;
+
+  adjustment_requested = 0.0;
+  T0 = T1;
+}
+
+/* ================================================== */
+
+/* Positive offset means system clock is fast of true time, therefore
+   slew backwards */
+
+static void
+accrue_offset(double offset, double corr_rate)
+{
+  stop_adjust();
+  offset_register += offset;
+  start_adjust();
+}
+
+/* ================================================== */
+
+/* Positive offset means system clock is fast of true time, therefore
+   step backwards */
+
+static int
+apply_step_offset(double offset)
+{
+  struct timeval old_time, new_time, T1;
+
+  stop_adjust();
+
+  if (gettimeofday(&old_time, NULL) < 0) {
+    LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
+  }
+
+  UTI_AddDoubleToTimeval(&old_time, -offset, &new_time);
+
+  if (settimeofday(&new_time, NULL) < 0) {
+    DEBUG_LOG(LOGF_SysMacOSX, "settimeofday() failed");
+    return 0;
+  }
+
+  UTI_AddDoubleToTimeval(&T0, offset, &T1);
+  T0 = T1;
+
+  start_adjust();
+
+  return 1;
+}
+
+/* ================================================== */
+
+static double
+set_frequency(double new_freq_ppm)
+{
+  stop_adjust();
+  current_freq = new_freq_ppm * 1.0e-6;
+  start_adjust();
+
+  return current_freq * 1.0e6;
+}
+
+/* ================================================== */
+
+static double
+read_frequency(void)
+{
+  return current_freq * 1.0e6;
+}
+
+/* ================================================== */
+
+static void
+get_offset_correction(struct timeval *raw,
+                      double *corr, double *err)
+{
+  stop_adjust();
+  *corr = -offset_register;
+  start_adjust();
+  if (err)
+    *err = 0.0;
+}
+
+/* ================================================== */
+
+void
+SYS_MacOSX_Initialise(void)
+{
+  int result;
+  size_t len;
+  struct clockinfo clockinfo;
+  int mib[2];
+
+  mib[0] = CTL_KERN;
+  mib[1] = KERN_CLOCKRATE;
+
+  len = sizeof(clockinfo);
+  result = sysctl(mib, 2, &clockinfo, &len, NULL, 0);
+
+  if(result < 0) {
+    LOG_FATAL(LOGF_SysMacOSX, "Cannot read clockinfo");
+  }
+  kern_tickadj = clockinfo.tickadj;
+  kern_bigadj = clockinfo.tick;
+
+  clock_initialise();
+
+  lcl_RegisterSystemDrivers(read_frequency, set_frequency,
+                            accrue_offset, apply_step_offset,
+                            get_offset_correction,
+                            NULL /* set_leap */,
+                            NULL /* set_sync_status */);
+}
+
+/* ================================================== */
+
+void
+SYS_MacOSX_Finalise(void)
+{
+  clock_finalise();
+}
+
+/* ================================================== */
+
+#endif

sys_macosx.h

@@ -0,0 +1,37 @@
+/*
+  chronyd/chronyc - Programs for keeping computer clocks accurate.
+
+ **********************************************************************
+ * Copyright (C) Richard P. Curnow  1997-2001
+ * Copyright (C) J. Hannken-Illjes  2001
+ * Copyright (C) Bryan Christianson 2015
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ **********************************************************************
+
+  =======================================================================
+
+  Header file for MacOS X driver
+
+  */
+
+#ifndef GOT_SYS_MACOSX_H
+#define GOT_SYS_MACOSX_H
+
+void SYS_MacOSX_Initialise(void);
+
+void SYS_MacOSX_Finalise(void);
+
+#endif

sysincl.h

@@ -29,9 +29,9 @@
 #ifndef GOT_SYSINCL_H
 #define GOT_SYSINCL_H
 
-#if defined (SOLARIS) || defined(SUNOS) || defined(LINUX) || defined(__NetBSD__)
+#if defined (SOLARIS) || defined(SUNOS) || defined(LINUX) || defined(__NetBSD__) || defined (MACOSX)
 
-#if !defined(__NetBSD__) && !defined(__FreeBSD__)
+#if !defined(__NetBSD__) && !defined(__FreeBSD__) && !defined(MACOSX)
 #include <alloca.h>
 #endif
 #include <assert.h>
@@ -39,7 +39,7 @@
 #include <errno.h>
 #include <fcntl.h>
 #include <float.h>
-#if !defined(__FreeBSD__)
+#if !defined(__FreeBSD__) && !defined(MACOSX)
 #include <malloc.h>
 #endif
 #include <math.h>

test/simulation/113-leapsecond

@@ -27,18 +27,20 @@ for leapmode in system step slew; do
 	check_sync || test_fail
 done
 
-server_conf="refclock SHM 0 dpoll 10 poll 10
-leapsectz right/UTC
-leapsecmode slew
-smoothtime 400 0.001"
-client_conf="leapsecmode system"
-min_sync_time=230000
-max_sync_time=240000
+for smoothmode in "" "leaponly"; do
+	server_conf="refclock SHM 0 dpoll 10 poll 10
+	leapsectz right/UTC
+	leapsecmode slew
+	smoothtime 400 0.001 $smoothmode"
+	client_conf="leapsecmode system"
+	min_sync_time=230000
+	max_sync_time=240000
 
-run_test || test_fail
-check_chronyd_exit || test_fail
-check_source_selection || test_fail
-check_packet_interval || test_fail
-check_sync || test_fail
+	run_test || test_fail
+	check_chronyd_exit || test_fail
+	check_source_selection || test_fail
+	check_packet_interval || test_fail
+	check_sync || test_fail
+done
 
 test_pass

test/simulation/202-prefer

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+. test.common
+
+# Test fix in commit 4253075a97141edfa62043ab71bd0673587e6629
+
+test_start "prefer option"
+
+servers=3
+client_server_conf="
+server 192.168.123.1
+server 192.168.123.2
+server 192.168.123.3 prefer"
+
+run_test || test_fail
+check_chronyd_exit || test_fail
+check_source_selection || test_fail
+check_packet_interval || test_fail
+check_sync || test_fail
+
+test_pass

test/simulation/test.common

@@ -18,7 +18,7 @@ export PATH=../../:$PATH
 export CLKNETSIM_PATH=clknetsim
 
 # Known working clknetsim revision
-clknetsim_revision=3eb3a8d9acf60c31f5acc66617175fc748ef367e
+clknetsim_revision=1e56224dee1db69c0027e9bd63c2a202d4765959
 clknetsim_url=https://github.com/mlichvar/clknetsim/archive/$clknetsim_revision.tar.gz
 
 # Only Linux is supported
@@ -65,6 +65,7 @@ default_chronyc_start=1000.0
 default_server_step=""
 default_client_step=""
 
+default_client_server_conf=""
 default_server_server_options=""
 default_client_server_options=""
 default_server_peer_options=""
@@ -192,9 +193,13 @@ get_chronyd_conf() {
 		done
 		echo "$server_conf"
 	else
-		for i in $(seq 1 $servers); do
-			echo "server 192.168.123.$[$servers * ($stratum - 2) + $i] $client_server_options"
-		done
+		if [ -n "$client_server_conf" ]; then
+			echo "$client_server_conf"
+		else
+			for i in $(seq 1 $servers); do
+				echo "server 192.168.123.$[$servers * ($stratum - 2) + $i] $client_server_options"
+			done
+		fi
 		for i in $(seq 1 $peers); do
 			[ $i -eq $peer -o $i -gt $clients ] && continue
 			echo "peer 192.168.123.$[$servers * ($stratum - 1) + $i] $client_peer_options"

util.c

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
- * Copyright (C) Miroslav Lichvar  2009, 2012-2013
+ * Copyright (C) Miroslav Lichvar  2009, 2012-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -609,6 +609,9 @@ UTI_Int64ToTimeval(NTP_int64 *src,
 /* Maximum offset between two sane times */
 #define MAX_OFFSET 4294967296.0
 
+/* Minimum allowed distance from maximum 32-bit time_t */
+#define MIN_ENDOFTIME_DISTANCE (365 * 24 * 3600)
+
 int
 UTI_IsTimeOffsetSane(struct timeval *tv, double offset)
 {
@@ -629,6 +632,10 @@ UTI_IsTimeOffsetSane(struct timeval *tv, double offset)
   /* Check if it's in the interval to which NTP time is mapped */
   if (t < (double)NTP_ERA_SPLIT || t > (double)(NTP_ERA_SPLIT + (1LL << 32)))
     return 0;
+#else
+  /* Don't get too close to 32-bit time_t overflow */
+  if (t > (double)(0x7fffffff - MIN_ENDOFTIME_DISTANCE))
+    return 0;
 #endif
 
   return 1;
@@ -636,6 +643,22 @@ UTI_IsTimeOffsetSane(struct timeval *tv, double offset)
 
 /* ================================================== */
 
+double
+UTI_Log2ToDouble(int l)
+{
+  if (l >= 0) {
+    if (l > 31)
+      l = 31;
+    return 1 << l;
+  } else {
+    if (l < -31)
+      l = -31;
+    return 1.0 / (1 << -l);
+  }
+}
+
+/* ================================================== */
+
 void
 UTI_TimevalNetworkToHost(Timeval *src, struct timeval *dest)
 {
@@ -700,7 +723,11 @@ UTI_FloatHostToNetwork(double x)
   if (x < 0.0) {
     x = -x;
     neg = 1;
+  } else if (x >= 0.0) {
+    neg = 0;
   } else {
+    /* Save NaN as zero */
+    x = 0.0;
     neg = 0;
   }
 

util.h

@@ -107,6 +107,9 @@ extern void UTI_Int64ToTimeval(NTP_int64 *src, struct timeval *dest);
 /* Check if time + offset is sane */
 extern int UTI_IsTimeOffsetSane(struct timeval *tv, double offset);
 
+/* Get 2 raised to power of a signed integer */
+extern double UTI_Log2ToDouble(int l);
+
 extern void UTI_TimevalNetworkToHost(Timeval *src, struct timeval *dest);
 extern void UTI_TimevalHostToNetwork(struct timeval *src, Timeval *dest);
 

wrap_adjtimex.c

@@ -71,7 +71,7 @@ TMX_ResetOffset(void)
 
   /* Set status back */
   txc.modes = ADJ_STATUS;
-  txc.modes = status;
+  txc.status = status;
   if (adjtimex(&txc) < 0)
     return -1;