doc: update NEWS

With connected sockets recv() should fail immediately if chronyd is not
listening on localhost and with the Unix socket connecting should fail.

.gitignore

@@ -2,20 +2,23 @@
 .vimrc
 *.o
 *.swp
-RELEASES
-Makefile
-chrony.conf.5
-chrony.info
-chrony.html
-chrony.texi
-chrony.txt
-chronyc
-chronyc.1
-chronyd
-chronyd.8
-config.h
-config.log
+*.dSYM
+*.DS_Store
 tags
-version.h
+/RELEASES
+/Makefile
+/chrony.conf.5
+/chrony.info
+/chrony.html
+/chrony.texi
+/chrony.txt
+/chronyc
+/chronyc.1
+/chronyd
+/chronyd.8
+/config.h
+/config.log
+/getdate.c
+/version.h
 /test/simulation/clknetsim
 /test/simulation/tmp

Makefile.in

@@ -38,13 +38,13 @@ DESTDIR=
 
 HASH_OBJ = @HASH_OBJ@
 
-OBJS = array.o cmdparse.o conf.o local.o logging.o main.o memory.o mkdirpp.o \
+OBJS = array.o cmdparse.o conf.o local.o logging.o main.o memory.o \
        reference.o regress.o rtc.o sched.o sources.o sourcestats.o stubs.o \
        sys.o smooth.o tempcomp.o util.o $(HASH_OBJ)
 
 EXTRA_OBJS=@EXTRA_OBJECTS@
 
-CLI_OBJS = client.o nameserv.o getdate.o cmdparse.o \
+CLI_OBJS = array.o client.o cmdparse.o getdate.o memory.o nameserv.o \
            pktlength.o util.o $(HASH_OBJ)
 
 ALL_OBJS = $(OBJS) $(EXTRA_OBJS) $(CLI_OBJS)
@@ -73,14 +73,16 @@ $(HASH_OBJ) : $(patsubst %.o,%.c,$(HASH_OBJ))
 	$(CC) $(CFLAGS) $(CPPFLAGS) @HASH_COMPILE@ -c $<
 
 distclean : clean
+	-rm -f .DS_Store
 	-rm -f Makefile
 	-rm -f chrony.conf.5 chrony.texi chronyc.1 chronyd.8
 
 clean :
 	-rm -f *.o *.s chronyc chronyd core *~ chrony.info chrony.html chrony.txt
 	-rm -rf .deps
+	-rm -rf *.dSYM
 
-getdate.c :
+getdate.c : getdate.y
 	bison -o getdate.c getdate.y
 
 # This can be used to force regeneration of getdate.c
@@ -90,15 +92,13 @@ getdate :
 # For install, don't use the install command, because its switches
 # seem to vary between systems.
 
-install: chronyd chronyc chrony.txt
+install: chronyd chronyc
 	[ -d $(DESTDIR)$(SYSCONFDIR) ] || mkdir -p $(DESTDIR)$(SYSCONFDIR)
 	[ -d $(DESTDIR)$(SBINDIR) ] || mkdir -p $(DESTDIR)$(SBINDIR)
 	[ -d $(DESTDIR)$(BINDIR) ] || mkdir -p $(DESTDIR)$(BINDIR)
-	[ -d $(DESTDIR)$(DOCDIR) ] || mkdir -p $(DESTDIR)$(DOCDIR)
 	[ -d $(DESTDIR)$(MANDIR)/man1 ] || mkdir -p $(DESTDIR)$(MANDIR)/man1
 	[ -d $(DESTDIR)$(MANDIR)/man5 ] || mkdir -p $(DESTDIR)$(MANDIR)/man5
 	[ -d $(DESTDIR)$(MANDIR)/man8 ] || mkdir -p $(DESTDIR)$(MANDIR)/man8
-	[ -d $(DESTDIR)$(DOCDIR) ] || mkdir -p $(DESTDIR)$(DOCDIR)
 	[ -d $(DESTDIR)$(CHRONYVARDIR) ] || mkdir -p $(DESTDIR)$(CHRONYVARDIR)
 	if [ -f $(DESTDIR)$(SBINDIR)/chronyd ]; then rm -f $(DESTDIR)$(SBINDIR)/chronyd ; fi
 	if [ -f $(DESTDIR)$(BINDIR)/chronyc ]; then rm -f $(DESTDIR)$(BINDIR)/chronyc ; fi
@@ -106,14 +106,6 @@ install: chronyd chronyc chrony.txt
 	chmod 755 $(DESTDIR)$(SBINDIR)/chronyd
 	cp chronyc $(DESTDIR)$(BINDIR)/chronyc
 	chmod 755 $(DESTDIR)$(BINDIR)/chronyc
-	cp chrony.txt $(DESTDIR)$(DOCDIR)/chrony.txt
-	chmod 644 $(DESTDIR)$(DOCDIR)/chrony.txt
-	cp COPYING $(DESTDIR)$(DOCDIR)/COPYING
-	chmod 644 $(DESTDIR)$(DOCDIR)/COPYING
-	cp README $(DESTDIR)$(DOCDIR)/README
-	chmod 644 $(DESTDIR)$(DOCDIR)/README
-	cp chrony.1 $(DESTDIR)$(MANDIR)/man1
-	chmod 644 $(DESTDIR)$(MANDIR)/man1/chrony.1
 	cp chronyc.1 $(DESTDIR)$(MANDIR)/man1
 	chmod 644 $(DESTDIR)$(MANDIR)/man1/chronyc.1
 	cp chronyd.8 $(DESTDIR)$(MANDIR)/man8
@@ -152,6 +144,12 @@ chrony.html : chrony.texi
 chrony.info : chrony.texi
 	makeinfo chrony.texi
 
+Makefile : Makefile.in configure
+	@echo
+	@echo Makefile needs to be regenerated, run ./configure
+	@echo
+	@exit 1
+
 .deps:
 	@mkdir .deps
 

NEWS

@@ -1,3 +1,61 @@
+New in version 2.2
+==================
+
+Enhancements
+------------
+* Add support for configuration and monitoring over Unix domain socket
+  (accessible by root or chrony user when root privileges are dropped)
+* Add support for system call filtering with seccomp on Linux
+* Add support for dropping root privileges on NetBSD
+* Control frequency of system clock on FreeBSD, NetBSD, Solaris
+* Add system leap second handling mode on FreeBSD, NetBSD, Solaris
+* Add dynamic drift removal on Mac OS X
+* Add support for setting real-time priority on Mac OS X
+* Add maxdistance directive to limit source selection by root distance
+* Add refresh command to get new addresses of NTP sources
+* Allow wildcard patterns in include directive
+* Add -d option to chronyc to enable debug messages
+* Allow multiple addresses to be specified for chronyc with -h option
+  and reconnect when no valid reply is received
+
+Bug fixes
+---------
+* Fix building on Solaris
+* Restore time from driftfile with -s option if reading RTC failed
+
+Removed features
+----------------
+* Drop support for authentication with command key (run-time configuration
+  is now allowed only for local users that can access the Unix domain socket)
+
+New in version 2.1.1
+====================
+
+Bug fixes
+---------
+* Fix clock stepping by integer number of seconds on Linux
+
+New in version 2.1
+==================
+
+Enhancements
+------------
+* Add support for Mac OS X
+* Try to replace unreachable and falseticker servers/peers specified
+  by name like pool sources
+* Add leaponly option to smoothtime directive to allow synchronised
+  leap smear between multiple servers
+* Use specific reference ID when smoothing served time
+* Add smoothing command to report time smoothing status
+* Add smoothtime command to activate or reset time smoothing
+
+Bug fixes
+---------
+* Fix crash in source selection with preferred sources
+* Fix resetting of time smoothing
+* Include packet precision in peer dispersion
+* Fix crash in chronyc on invalid command syntax
+
 New in version 2.0
 ==================
 

README

@@ -27,11 +27,11 @@ operating parameters whilst it is running.
 What will chrony run on?
 ========================
 
-The software is known to work on Linux, FreeBSD, NetBSD and Solaris.
-Closely related systems may work too.  Any other system will likely
-require a porting exercise.  You would need to start from one of the
-existing system-specific drivers and look into the quirks of certain
-system calls and the kernel on your target system.
+The software is known to work on Linux, FreeBSD, NetBSD, Mac OS X and
+Solaris.  Closely related systems may work too.  Any other system will
+likely require a porting exercise.  You would need to start from one
+of the existing system-specific drivers and look into the quirks of
+certain system calls and the kernel on your target system.
 
 How do I set it up?
 ===================
@@ -128,6 +128,9 @@ Stephan I. Boettcher <stephan@nevis1.columbia.edu>
 Erik Bryer <ebryer@spots.ab.ca>
     Entries in contrib directory
 
+Bryan Christianson <bryan@whatroute.net>
+    Support for Mac OS X
+
 Juliusz Chroboczek <jch@pps.jussieu.fr>
     Fix install rule in Makefile if chronyd file is in use.
 
@@ -142,6 +145,9 @@ Alexander Gretencord <arutha@gmx.de>
     Changes to installation directory system to make it easier for
     package builders.
 
+Andrew Griffiths <agriffit@redhat.com>
+    Patch to add support for seccomp filter
+
 Walter Haidinger <walter.haidinger@gmx.at>
     Providing me with login access to a Linux installation where v1.12
     wouldn't compile, so I could develop the fixes for v1.13.  Also, for
@@ -201,6 +207,9 @@ Kalle Olavi Niemitalo  <tosi@stekt.oulu.fi>
 Frank Otto <sandwichmacher@web.de>
     Handling arbitrary HZ values
 
+Gautier PHILIPPON <gautier.philippon@ensimag.grenoble-inp.fr>
+    Patch to add refresh command to chronyc
+
 Andreas Piesk <apiesk@virbus.de>
     Patch to make chronyc use the readline library if available
 

array.c

@@ -44,6 +44,8 @@ ARR_CreateInstance(unsigned int elem_size)
 {
   ARR_Instance array;
 
+  assert(elem_size > 0);
+
   array = MallocNew(struct ARR_Instance_Record);
 
   array->data = NULL;
@@ -64,6 +66,9 @@ ARR_DestroyInstance(ARR_Instance array)
 static void
 realloc_array(ARR_Instance array, unsigned int min_size)
 {
+  size_t data_size;
+
+  assert(min_size <= 2 * min_size);
   if (array->allocated >= min_size && array->allocated <= 2 * min_size)
     return;
 
@@ -74,7 +79,10 @@ realloc_array(ARR_Instance array, unsigned int min_size)
     array->allocated = min_size;
   }
 
-  array->data = Realloc(array->data, array->elem_size * array->allocated);
+  data_size = (size_t)array->elem_size * array->allocated;
+  assert(data_size / array->elem_size == array->allocated);
+
+  array->data = Realloc(array->data, data_size);
 }
 
 void *
@@ -89,7 +97,7 @@ void *
 ARR_GetElement(ARR_Instance array, unsigned int index)
 {
   assert(index < array->used);
-  return (void *)((char *)array->data + index * array->elem_size);
+  return (void *)((char *)array->data + (size_t)index * array->elem_size);
 }
 
 void *

candm.h

@@ -31,7 +31,6 @@
 
 #include "sysincl.h"
 #include "addressing.h"
-#include "hash.h"
 
 /* This is the default port to use for CANDM, if no alternative is
    defined */
@@ -89,7 +88,10 @@
 #define REQ_RESELECT 48
 #define REQ_RESELECTDISTANCE 49
 #define REQ_MODIFY_MAKESTEP 50
-#define N_REQUEST_TYPES 51
+#define REQ_SMOOTHING 51
+#define REQ_SMOOTHTIME 52
+#define REQ_REFRESH 53
+#define N_REQUEST_TYPES 54
 
 /* Special utoken value used to log on with first exchange being the
    password.  (This time value has long since gone by) */
@@ -116,6 +118,10 @@ typedef struct {
    pktlength.c, to get the number of bytes that ought to be
    transmitted for each packet type. */
 
+typedef struct {
+  int32_t EOR;
+} REQ_Null;
+
 typedef struct {
   IPAddr mask;
   IPAddr address;
@@ -215,19 +221,11 @@ typedef struct {
   int32_t EOR;
 } REQ_Manual;
 
-typedef struct {
-  int32_t EOR;
-} REQ_N_Sources;
-
 typedef struct {
   int32_t index;
   int32_t EOR;
 } REQ_Source_Data;
 
-typedef struct {
-  int32_t EOR;
-} REQ_Rekey;
-
 typedef struct {
   IPAddr ip;
   int32_t subnet_bits;
@@ -264,10 +262,6 @@ typedef struct {
   int32_t EOR;
 } REQ_Del_Source;
 
-typedef struct {
-  int32_t EOR;
-} REQ_WriteRtc;
-
 typedef struct {
   Float dfreq;
   int32_t EOR;
@@ -279,27 +273,11 @@ typedef struct {
   int32_t EOR;
 } REQ_Doffset;
 
-typedef struct {
-  int32_t EOR;
-} REQ_Tracking;
-
 typedef struct {
   uint32_t index;
   int32_t EOR;
 } REQ_Sourcestats;
 
-typedef struct {
-  int32_t EOR;
-} REQ_RTCReport;
-
-typedef struct {
-  int32_t EOR;
-} REQ_TrimRTC;
-
-typedef struct {
-  int32_t EOR;
-} REQ_CycleLogs;
-
 /* This is based on the response size rather than the
    request size */
 #define MAX_CLIENT_ACCESSES 8
@@ -310,32 +288,24 @@ typedef struct {
   int32_t EOR;
 } REQ_ClientAccessesByIndex;
 
-typedef struct {
-  int32_t EOR;
-} REQ_ManualList;
-
 typedef struct {
   int32_t index;
   int32_t EOR;
 } REQ_ManualDelete;
 
-typedef struct {
-  int32_t EOR;
-} REQ_MakeStep;
-
-typedef struct {
-  int32_t EOR;
-} REQ_Activity;
-
-typedef struct {
-  int32_t EOR;
-} REQ_Reselect;
-
 typedef struct {
   Float distance;
   int32_t EOR;
 } REQ_ReselectDistance;
 
+#define REQ_SMOOTHTIME_RESET 0
+#define REQ_SMOOTHTIME_ACTIVATE 1
+
+typedef struct {
+  int32_t option;
+  int32_t EOR;
+} REQ_SmoothTime;
+
 /* ================================================== */
 
 #define PKT_TYPE_CMD_REQUEST 1
@@ -365,7 +335,9 @@ typedef struct {
 
    Version 6 : added padding to requests to prevent amplification attack,
    changed maximum number of samples in manual list to 16, new commands: modify
-   makestep
+   makestep, smoothing report, smoothtime command
+
+   Authentication was removed later in version 6.
  */
 
 #define PROTO_VERSION_NUMBER 6
@@ -394,10 +366,11 @@ typedef struct {
                              (count up from zero for same sequence
                              number) */
   uint32_t sequence; /* Client's sequence number */
-  uint32_t utoken; /* Unique token per incarnation of daemon */
-  uint32_t token; /* Command token (to prevent replay attack) */
+  uint32_t pad1;
+  uint32_t pad2;
 
   union {
+    REQ_Null null;
     REQ_Online online;
     REQ_Offline offline;
     REQ_Burst burst;
@@ -415,39 +388,24 @@ typedef struct {
     REQ_Settime settime;
     REQ_Local local;
     REQ_Manual manual;
-    REQ_N_Sources n_sources;
     REQ_Source_Data source_data;
-    REQ_Rekey rekey;
     REQ_Allow_Deny allow_deny;
     REQ_Ac_Check ac_check;
     REQ_NTP_Source ntp_source;
     REQ_Del_Source del_source;
-    REQ_WriteRtc writertc;
     REQ_Dfreq dfreq;
     REQ_Doffset doffset;
-    REQ_Tracking tracking;
     REQ_Sourcestats sourcestats;
-    REQ_RTCReport rtcreport;
-    REQ_TrimRTC trimrtc;
-    REQ_CycleLogs cyclelogs;
     REQ_ClientAccessesByIndex client_accesses_by_index;
-    REQ_ManualList manual_list;
     REQ_ManualDelete manual_delete;
-    REQ_MakeStep make_step;
-    REQ_Activity activity;
-    REQ_Reselect reselect;
     REQ_ReselectDistance reselect_distance;
+    REQ_SmoothTime smoothtime;
   } data; /* Command specific parameters */
 
-  /* The following fields only set the maximum size of the packet.
-     There are no holes between them and the actual data. */
-
-  /* Padding used to prevent traffic amplification */
+  /* Padding used to prevent traffic amplification.  It only defines the
+     maximum size of the packet, there is no hole after the data field. */
   uint8_t padding[MAX_PADDING_LENGTH];
 
-  /* Authentication data */
-  uint8_t auth[MAX_HASH_LENGTH];
-
 } CMD_Request;
 
 /* ================================================== */
@@ -472,7 +430,8 @@ typedef struct {
 #define RPY_CLIENT_ACCESSES_BY_INDEX 10
 #define RPY_MANUAL_LIST 11
 #define RPY_ACTIVITY 12
-#define N_REPLY_TYPES 13
+#define RPY_SMOOTHING 13
+#define N_REPLY_TYPES 14
 
 /* Status codes */
 #define STT_SUCCESS 0
@@ -627,6 +586,19 @@ typedef struct {
   int32_t EOR;
 } RPY_Activity;
 
+#define RPY_SMT_FLAG_ACTIVE 0x1
+#define RPY_SMT_FLAG_LEAPONLY 0x2
+
+typedef struct {
+  uint32_t flags;
+  Float offset;
+  Float freq_ppm;
+  Float wander_ppm;
+  Float last_update_ago;
+  Float remaining_time;
+  int32_t EOR;
+} RPY_Smoothing;
+
 typedef struct {
   uint8_t version;
   uint8_t pkt_type;
@@ -639,9 +611,9 @@ typedef struct {
   uint16_t pad2;
   uint16_t pad3;
   uint32_t sequence; /* Echo of client's sequence number */
-  uint32_t utoken; /* Unique token per incarnation of daemon */
-  uint32_t token; /* New command token (only if command was successfully
-                          authenticated) */
+  uint32_t pad4;
+  uint32_t pad5;
+
   union {
     RPY_Null null;
     RPY_N_Sources n_sources;
@@ -653,12 +625,9 @@ typedef struct {
     RPY_ClientAccessesByIndex client_accesses_by_index;
     RPY_ManualList manual_list;
     RPY_Activity activity;
+    RPY_Smoothing smoothing;
   } data; /* Reply specific parameters */
 
-  /* authentication of the packet, there is no hole after the actual data
-     from the data union, this field only sets the maximum auth size */
-  uint8_t auth[MAX_HASH_LENGTH];
-
 } CMD_Reply;
 
 /* ================================================== */

chrony.1

@@ -1,72 +0,0 @@
-.TH CHRONY 1 "@MAN_DATE@" "chrony @VERSION@" "User's Manual"
-.SH NAME
-chrony \- programs for keeping computer clocks accurate
-
-.SH SYNOPSIS
-\fBchronyc\fR [\fIOPTIONS\fR]
-
-\fBchronyd\fR [\fIOPTIONS\fR]
-
-.SH DESCRIPTION
-\fBchrony\fR is a pair of programs for keeping computer clocks accurate.
-\fIchronyd\fR is a background (daemon) program and \fIchronyc\fR is a
-command-line interface to it. Time reference sources for chronyd can be
-NTP servers, human (via keyboard and \fIchronyc\fR), or the computer's
-real-time clock at boot time (Linux only). chronyd can determine the rate at
-which the computer gains or loses time and compensate for it while no external
-reference is present. Its use of NTP servers can be switched on and off
-(through \fIchronyc\fR) to support computers with dial-up/intermittent access
-to the Internet, and it can also act as an NTP server.
-
-.SH USAGE
-\fIchronyc\fR is a command-line interface program which can be used to
-monitor \fIchronyd\fR's performance and to change various operating
-parameters whilst it is running.
-
-\fIchronyd\fR's main function is to obtain measurements of the true (UTC)
-time from one of several sources, and correct the system clock
-accordingly.  It also works out the rate at which the system clock
-gains or loses time and uses this information to keep it accurate
-between measurements from the reference.
-
-The reference time can be derived from either Network Time Protocol
-(NTP) servers, reference clocks, or wristwatch-and-keyboard (via \fIchronyc\fR).
-The main source of information about the Network Time Protocol is
-\fIhttp://www.ntp.org\fR.
-
-It is designed so that it can work on computers which only have
-intermittent access to reference sources, for example computers which
-use a dial-up account to access the Internet or laptops.  Of course, it
-will work well on computers with permanent connections too.
-
-In addition, on Linux it can monitor the system's real time clock
-performance, so the system can maintain accurate time even across
-reboots.
-
-Typical accuracies available between 2 machines are
-
-On an ethernet LAN : 100-200 microseconds, often much better
-On a V32bis dial-up modem connection : 10's of milliseconds (from one
-session to the next)
-
-With a good reference clock the accuracy can reach one microsecond.
-
-\fIchronyd\fR can also operate as an NTPv4 (RFC 5905) server, peer and
-broadcast server.
-
-.SH "SEE ALSO"
-.BR chronyc(1),
-.BR chrony.conf(5),
-.BR chronyd(8)
-
-.I http://chrony.tuxfamily.org/
-
-.SH AUTHOR
-Richard Curnow <rc@rc0.org.uk>
-
-This man-page was written by Jan Schaumann <jschauma@netmeister.org> as part
-of "The Missing Man Pages Project".  Please see
-\fIhttp://www.netmeister.org/misc/m2p2/index.html\fR for details.
-
-The complete chrony documentation is supplied in texinfo format.
-

chrony.conf.5.in

@@ -40,9 +40,8 @@ useful configuration file would look something like
 
 When using a pool of NTP servers (one name is used for multiple servers which
 may change over time), it's better to specify them with the `pool' directive
-instead of multiple `server' directives in order to allow \fIchronyd\fR to
-replace unreachable or bad servers automatically.  The configuration file could
-in this case look like
+instead of multiple `server' directives.  The configuration file could in this
+case look like
 
 .EX
      pool pool.ntp.org iburst
@@ -52,7 +51,6 @@ in this case look like
 .EE
 
 .SH "SEE ALSO"
-.BR chrony(1),
 .BR chronyc(1),
 .BR chronyd(8)
 

chronyc.1.in

@@ -24,7 +24,8 @@ A summary of the options supported by \fBchronyc\fR is included below.
 
 .TP
 \fB\-h\fR \fIhostname\fR
-specify hostname (default 127.0.0.1)
+specify hostname or comma-separated list of addresses
+(default @CHRONYSOCKDIR@/chronyd.sock,127.0.0.1,::1)
 .TP
 \fB\-p\fR \fIport-number\fR
 specify port-number
@@ -32,6 +33,9 @@ specify port-number
 \fB\-n\fR
 display raw IP addresses (don't attempt to look up hostnames)
 .TP
+\fB\-d\fR
+print debugging messages (if compiled with debugging support)
+.TP
 \fB\-4\fR
 resolve hostnames only to IPv4 addresses
 .TP
@@ -43,14 +47,10 @@ allow multiple commands to be specified on the command line.  Each argument
 will be interpreted as a whole command.
 .TP
 \fB\-f\fR \fIconf-file\fR
-This option can be used to specify an alternate location for the
-configuration file (default \fI@SYSCONFDIR@/chrony.conf\fR). The configuration file is
-needed for the \fB-a\fR option.
+this option is ignored and is provided only for compatibility.
 .TP
 \fB\-a\fR
-With this option chronyc will try to authenticate automatically on
-start. It will read the configuration file, read the command key from the
-keyfile and run the authhash and password commands.
+this option is ignored and is provided only for compatibility.
 .TP
 \fIcommand\fR
 specify command.  If no command is given, chronyc will read commands
@@ -60,8 +60,7 @@ interactively.
 To report bugs, please visit \fIhttp://chrony.tuxfamily.org\fR
 
 .SH "SEE ALSO"
-.BR chronyd(8),
-.BR chrony(1)
+.BR chronyd(8)
 
 .I http://chrony.tuxfamily.org/
 

chronyd.8.in

@@ -40,9 +40,11 @@ A summary of the options supported by \fBchronyd\fR is included below.
 
 .TP
 \fB\-P\fR \fIpriority\fR
-This option will select the SCHED_FIFO real-time scheduler at the specified
-priority (which must be between 0 and 100).  This mode is supported only on
-Linux.
+On Linux, this option will select the SCHED_FIFO real-time scheduler at the
+specified priority (which must be between 0 and 100).  On Mac OS X, this
+option must have either a value of 0 (the default) to disable the thread
+time constraint policy or 1 for the policy to be enabled.  Other systems do not
+support this option.
 .TP
 .B \-m
 This option will lock chronyd into RAM so that it will never be paged out.
@@ -67,10 +69,9 @@ This option will reload sample histories for each of the servers being used.
 These histories are created by using the \fIdump\fR command in \fIchronyc\fR,
 or by setting the \fIdumponexit\fR directive in the configuration file.  This
 option is useful if you want to stop and restart \fBchronyd\fR briefly for any
-reason, e.g. to install a new version.  However, it only makes sense on
+reason, e.g. to install a new version.  However, it should be used only on
 systems where the kernel can maintain clock compensation whilst not under
-\fBchronyd\fR's control.  The only version where this happens so far is Linux.
-On other systems this option should not be used.
+\fBchronyd\fR's control (i.e. Linux, FreeBSD, NetBSD and Solaris).
 .TP
 .B \-R
 When this option is used, the \fIinitstepslew\fR directive and the
@@ -103,9 +104,17 @@ directive) to restore the system time at which \fBchronyd\fR was previously
 stopped.
 .TP
 \fB\-u\fR \fIuser\fR
-This option sets the name of the user to which will \fBchronyd\fR switch to
-drop root privileges if compiled with Linux capabilities support (default
-\fB@DEFAULT_USER@\fR).
+This option sets the name of the system user to which \fBchronyd\fR will switch
+after start in order to drop root privileges.  It overrides the \fBuser\fR
+directive (default \fB@DEFAULT_USER@\fR).  It may be set to a non-root user
+only when \fBchronyd\fR is compiled with support for Linux capabilities
+(libcap) or on NetBSD with the \fB/dev/clockctl\fR device.
+.TP
+\fB\-F\fR \fIlevel\fR
+This option configures a system call filter when \fBchronyd\fR is compiled with
+support for the Linux secure computing (seccomp) facility. In level 1 the
+process is killed when a forbidden system call is made, in level -1 the SYSSIG
+signal is thrown instead and in level 0 the filter is disabled (default 0).
 .TP
 .B \-q
 When run in this mode, chronyd will set the system clock once
@@ -134,7 +143,6 @@ To report bugs, please visit \fIhttp://chrony.tuxfamily.org/\fR
 \fBchronyd\fR is documented in detail in the documentation supplied with the
 distribution (\fIchrony.txt\fR and \fIchrony.texi\fR).
 
-.BR chrony(1),
 .BR chronyc(1),
 .BR chrony.conf(5),
 .BR hwclock(8),

clientlog.c

@@ -263,25 +263,31 @@ find_subnet(Subnet *subnet, uint32_t *addr, int addr_len, int bits_consumed)
 
 /* ================================================== */
 
+static Node *
+get_node(IPAddr *ip)
+{
+  uint32_t ip6[4];
+
+  switch (ip->family) {
+    case IPADDR_INET4:
+      return (Node *)find_subnet(&top_subnet4, &ip->addr.in4, 1, 0);
+    case IPADDR_INET6:
+      split_ip6(ip, ip6);
+      return (Node *)find_subnet(&top_subnet6, ip6, 4, 0);
+    default:
+      return NULL;
+  }
+}
+
+/* ================================================== */
+
 void
 CLG_LogNTPClientAccess (IPAddr *client, time_t now)
 {
-  uint32_t ip6[4];
   Node *node;
 
   if (active) {
-    switch (client->family) {
-      case IPADDR_INET4:
-        node = (Node *) find_subnet(&top_subnet4, &client->addr.in4, 1, 0);
-        break;
-      case IPADDR_INET6:
-        split_ip6(client, ip6);
-        node = (Node *) find_subnet(&top_subnet6, ip6, 4, 0);
-        break;
-      default:
-        assert(0);
-    }
-
+    node = get_node(client);
     if (node == NULL)
       return;
 
@@ -296,22 +302,10 @@ CLG_LogNTPClientAccess (IPAddr *client, time_t now)
 void
 CLG_LogNTPPeerAccess(IPAddr *client, time_t now)
 {
-  uint32_t ip6[4];
   Node *node;
 
   if (active) {
-    switch (client->family) {
-      case IPADDR_INET4:
-        node = (Node *) find_subnet(&top_subnet4, &client->addr.in4, 1, 0);
-        break;
-      case IPADDR_INET6:
-        split_ip6(client, ip6);
-        node = (Node *) find_subnet(&top_subnet6, ip6, 4, 0);
-        break;
-      default:
-        assert(0);
-    }
-
+    node = get_node(client);
     if (node == NULL)
       return;
 
@@ -326,22 +320,10 @@ CLG_LogNTPPeerAccess(IPAddr *client, time_t now)
 void
 CLG_LogCommandAccess(IPAddr *client, CLG_Command_Type type, time_t now)
 {
-  uint32_t ip6[4];
   Node *node;
 
   if (active) {
-    switch (client->family) {
-      case IPADDR_INET4:
-        node = (Node *) find_subnet(&top_subnet4, &client->addr.in4, 1, 0);
-        break;
-      case IPADDR_INET6:
-        split_ip6(client, ip6);
-        node = (Node *) find_subnet(&top_subnet6, ip6, 4, 0);
-        break;
-      default:
-        assert(0);
-    }
-
+    node = get_node(client);
     if (node == NULL)
       return;
 

cmdmon.h

@@ -33,6 +33,7 @@ extern void CAM_Initialise(int family);
 
 extern void CAM_Finalise(void);
 
+extern void CAM_OpenUnixSocket(void);
 extern int CAM_AddAccessRestriction(IPAddr *ip_addr, int subnet_bits, int allow, int all);
 extern int CAM_CheckAccessRestriction(IPAddr *ip_addr);
 

conf.c

@@ -47,7 +47,6 @@
 
 static int parse_string(char *line, char **result);
 static int parse_int(char *line, int *result);
-static int parse_uint32(char *, uint32_t *result);
 static int parse_double(char *line, double *result);
 static int parse_null(char *line);
 
@@ -80,19 +79,18 @@ static void parse_tempcomp(char *);
 /* Configuration variables */
 
 static int restarted = 0;
-static int generate_command_key = 0;
 static char *rtc_device;
 static int acquisition_port = -1;
 static int ntp_port = 123;
 static char *keys_file = NULL;
 static char *drift_file = NULL;
 static char *rtc_file = NULL;
-static uint32_t command_key_id;
 static double max_update_skew = 1000.0;
 static double correction_time_ratio = 3.0;
 static double max_clock_error = 1.0; /* in ppm */
 static double max_slew_rate = 1e6 / 12.0; /* in ppm */
 
+static double max_distance = 3.0;
 static double reselect_distance = 1e-4;
 static double stratum_weight = 1e-3;
 static double combine_limit = 3.0;
@@ -182,6 +180,9 @@ static IPAddr bind_acq_address4, bind_acq_address6;
    the loopback address will be used */
 static IPAddr bind_cmd_address4, bind_cmd_address6;
 
+/* Path to the Unix domain command socket. */
+static char *bind_cmd_path;
+
 /* Filename to use for storing pid of running chronyd, to prevent multiple
  * chronyds being started. */
 static char *pidfile;
@@ -189,6 +190,7 @@ static char *pidfile;
 /* Smoothing constants */
 static double smooth_max_freq = 0.0; /* in ppm */
 static double smooth_max_wander = 0.0; /* in ppm/s */
+static int smooth_leap_only = 0;
 
 /* Temperature sensor, update interval and compensation coefficients */
 static char *tempcomp_sensor_file = NULL;
@@ -319,6 +321,7 @@ CNF_Initialise(int r)
 
   dumpdir = Strdup(".");
   logdir = Strdup(".");
+  bind_cmd_path = Strdup(DEFAULT_COMMAND_SOCKET);
   pidfile = Strdup("/var/run/chronyd.pid");
   rtc_device = Strdup("/dev/rtc");
   user = Strdup(DEFAULT_USER);
@@ -348,6 +351,7 @@ CNF_Finalise(void)
   Free(keys_file);
   Free(leapsec_tz);
   Free(logdir);
+  Free(bind_cmd_path);
   Free(pidfile);
   Free(rtc_device);
   Free(rtc_file);
@@ -369,10 +373,13 @@ CNF_ReadFile(const char *filename)
 
   in = fopen(filename, "r");
   if (!in) {
-    LOG_FATAL(LOGF_Configure, "Could not open configuration file %s", filename);
+    LOG_FATAL(LOGF_Configure, "Could not open configuration file %s : %s",
+              filename, strerror(errno));
     return;
   }
 
+  DEBUG_LOG(LOGF_Configure, "Reading %s", filename);
+
   for (i = 1; fgets(line, sizeof(line), in); i++) {
     CNF_ParseLine(filename, i, line);
   }
@@ -425,8 +432,6 @@ CNF_ParseLine(const char *filename, int number, char *line)
     parse_int(p, &cmd_port);
   } else if (!strcasecmp(command, "combinelimit")) {
     parse_double(p, &combine_limit);
-  } else if (!strcasecmp(command, "commandkey")) {
-    parse_uint32(p, &command_key_id);
   } else if (!strcasecmp(command, "corrtimeratio")) {
     parse_double(p, &correction_time_ratio);
   } else if (!strcasecmp(command, "deny")) {
@@ -439,8 +444,6 @@ CNF_ParseLine(const char *filename, int number, char *line)
     do_dump_on_exit = parse_null(p);
   } else if (!strcasecmp(command, "fallbackdrift")) {
     parse_fallbackdrift(p);
-  } else if (!strcasecmp(command, "generatecommandkey")) {
-    generate_command_key = parse_null(p);
   } else if (!strcasecmp(command, "hwclockfile")) {
     parse_string(p, &hwclock_file);
   } else if (!strcasecmp(command, "include")) {
@@ -453,10 +456,6 @@ CNF_ParseLine(const char *filename, int number, char *line)
     parse_leapsecmode(p);
   } else if (!strcasecmp(command, "leapsectz")) {
     parse_string(p, &leapsec_tz);
-  } else if (!strcasecmp(command, "linux_freq_scale")) {
-    LOG(LOGS_WARN, LOGF_Configure, "%s directive is no longer supported", command);
-  } else if (!strcasecmp(command, "linux_hz")) {
-    LOG(LOGS_WARN, LOGF_Configure, "%s directive is no longer supported", command);
   } else if (!strcasecmp(command, "local")) {
     parse_local(p);
   } else if (!strcasecmp(command, "lock_all")) {
@@ -479,6 +478,8 @@ CNF_ParseLine(const char *filename, int number, char *line)
     parse_maxchange(p);
   } else if (!strcasecmp(command, "maxclockerror")) {
     parse_double(p, &max_clock_error);
+  } else if (!strcasecmp(command, "maxdistance")) {
+    parse_double(p, &max_distance);
   } else if (!strcasecmp(command, "maxsamples")) {
     parse_int(p, &max_samples);
   } else if (!strcasecmp(command, "maxslewrate")) {
@@ -525,6 +526,11 @@ CNF_ParseLine(const char *filename, int number, char *line)
     parse_tempcomp(p);
   } else if (!strcasecmp(command, "user")) {
     parse_string(p, &user);
+  } else if (!strcasecmp(command, "commandkey") ||
+             !strcasecmp(command, "generatecommandkey") ||
+             !strcasecmp(command, "linux_freq_scale") ||
+             !strcasecmp(command, "linux_hz")) {
+    LOG(LOGS_WARN, LOGF_Configure, "%s directive is no longer supported", command);
   } else {
     other_parse_error("Invalid command");
   }
@@ -556,19 +562,6 @@ parse_int(char *line, int *result)
 
 /* ================================================== */
 
-static int
-parse_uint32(char *line, uint32_t *result)
-{
-  check_number_of_args(line, 1);
-  if (sscanf(line, "%"SCNu32, result) != 1) {
-    command_parse_error();
-    return 0;
-  }
-  return 1;
-}
-
-/* ================================================== */
-
 static int
 parse_double(char *line, double *result)
 {
@@ -1112,7 +1105,14 @@ parse_bindcmdaddress(char *line)
   IPAddr ip;
 
   check_number_of_args(line, 1);
-  if (UTI_StringToIP(line, &ip)) {
+
+  /* Address starting with / is for the Unix domain socket */
+  if (line[0] == '/') {
+    parse_string(line, &bind_cmd_path);
+    /* / disables the socket */
+    if (!strcmp(bind_cmd_path, "/"))
+        bind_cmd_path[0] = '\0';
+  } else if (UTI_StringToIP(line, &ip)) {
     if (ip.family == IPADDR_INET4)
       bind_cmd_address4 = ip;
     else if (ip.family == IPADDR_INET6)
@@ -1174,11 +1174,23 @@ parse_broadcast(char *line)
 static void
 parse_smoothtime(char *line)
 {
-  check_number_of_args(line, 2);
+  if (get_number_of_args(line) != 3)
+    check_number_of_args(line, 2);
+
   if (sscanf(line, "%lf %lf", &smooth_max_freq, &smooth_max_wander) != 2) {
     smooth_max_freq = 0.0;
     command_parse_error();
   }
+
+  line = CPS_SplitWord(CPS_SplitWord(line));
+  smooth_leap_only = 0;
+
+  if (*line) {
+    if (!strcasecmp(line, "leaponly"))
+      smooth_leap_only = 1;
+    else
+      command_parse_error();
+  }
 }
 
 /* ================================================== */
@@ -1227,8 +1239,47 @@ parse_tempcomp(char *line)
 static void
 parse_include(char *line)
 {
+  glob_t gl;
+  size_t i;
+
   check_number_of_args(line, 1);
-  CNF_ReadFile(line);
+
+  if (glob(line, 0, NULL, &gl)) {
+    DEBUG_LOG(LOGF_Configure, "glob of %s failed", line);
+    return;
+  }
+
+  for (i = 0; i < gl.gl_pathc; i++)
+    CNF_ReadFile(gl.gl_pathv[i]);
+
+  globfree(&gl);
+}
+
+/* ================================================== */
+
+void
+CNF_CreateDirs(uid_t uid, gid_t gid)
+{
+  char *dir;
+
+  UTI_CreateDirAndParents(logdir, 0755, uid, gid);
+  UTI_CreateDirAndParents(dumpdir, 0755, uid, gid);
+
+  /* Create a directory for the Unix domain command socket */
+  if (bind_cmd_path[0]) {
+    dir = UTI_PathToDir(bind_cmd_path);
+    UTI_CreateDirAndParents(dir, 0770, uid, gid);
+
+    /* Check the permissions and owner/group in case the directory already
+       existed.  It MUST NOT be accessible by others as permissions on Unix
+       domain sockets are ignored on some systems (e.g. Solaris). */
+    if (!UTI_CheckDirPermissions(dir, 0770, uid, gid)) {
+      LOG(LOGS_WARN, LOGF_Configure, "Disabled command socket %s", bind_cmd_path);
+      bind_cmd_path[0] = '\0';
+    }
+
+    Free(dir);
+  }
 }
 
 /* ================================================== */
@@ -1436,22 +1487,6 @@ CNF_GetRtcDevice(void)
 
 /* ================================================== */
 
-uint32_t
-CNF_GetCommandKey(void)
-{
-  return command_key_id;
-}
-
-/* ================================================== */
-
-int
-CNF_GetGenerateCommandKey(void)
-{
-  return generate_command_key;
-}
-
-/* ================================================== */
-
 int
 CNF_GetDumpOnExit(void)
 {
@@ -1492,6 +1527,14 @@ CNF_GetMaxSlewRate(void)
 
 /* ================================================== */
 
+double
+CNF_GetMaxDistance(void)
+{
+  return max_distance;
+}
+
+/* ================================================== */
+
 double
 CNF_GetReselectDistance(void)
 {
@@ -1684,6 +1727,14 @@ CNF_GetBindAcquisitionAddress(int family, IPAddr *addr)
 
 /* ================================================== */
 
+char *
+CNF_GetBindCommandPath(void)
+{
+  return bind_cmd_path;
+}
+
+/* ================================================== */
+
 void
 CNF_GetBindCommandAddress(int family, IPAddr *addr)
 {
@@ -1738,10 +1789,11 @@ CNF_GetLockMemory(void)
 /* ================================================== */
 
 void
-CNF_GetSmooth(double *max_freq, double *max_wander)
+CNF_GetSmooth(double *max_freq, double *max_wander, int *leap_only)
 {
   *max_freq = smooth_max_freq;
   *max_wander = smooth_max_wander;
+  *leap_only = smooth_leap_only;
 }
 
 /* ================================================== */

conf.h

@@ -39,6 +39,8 @@ extern char *CNF_GetRtcDevice(void);
 extern void CNF_ReadFile(const char *filename);
 extern void CNF_ParseLine(const char *filename, int number, char *line);
 
+extern void CNF_CreateDirs(uid_t uid, gid_t gid);
+
 extern void CNF_AddInitSources(void);
 extern void CNF_AddSources(void);
 extern void CNF_AddBroadcasts(void);
@@ -58,8 +60,6 @@ extern int CNF_GetLogRefclocks(void);
 extern int CNF_GetLogTempComp(void);
 extern char *CNF_GetKeysFile(void);
 extern char *CNF_GetRtcFile(void);
-extern uint32_t CNF_GetCommandKey(void);
-extern int CNF_GetGenerateCommandKey(void);
 extern int CNF_GetDumpOnExit(void);
 extern int CNF_GetManualEnabled(void);
 extern int CNF_GetCommandPort(void);
@@ -75,6 +75,7 @@ extern void CNF_GetFallbackDrifts(int *min, int *max);
 extern void CNF_GetBindAddress(int family, IPAddr *addr);
 extern void CNF_GetBindAcquisitionAddress(int family, IPAddr *addr);
 extern void CNF_GetBindCommandAddress(int family, IPAddr *addr);
+extern char *CNF_GetBindCommandPath(void);
 extern char *CNF_GetPidFile(void);
 extern REF_LeapMode CNF_GetLeapSecMode(void);
 extern char *CNF_GetLeapSecTimezone(void);
@@ -85,6 +86,7 @@ extern double CNF_GetMaxClockError(void);
 extern double CNF_GetCorrectionTimeRatio(void);
 extern double CNF_GetMaxSlewRate(void);
 
+extern double CNF_GetMaxDistance(void);
 extern double CNF_GetReselectDistance(void);
 extern double CNF_GetStratumWeight(void);
 extern double CNF_GetCombineLimit(void);
@@ -96,7 +98,7 @@ extern void CNF_SetupAccessRestrictions(void);
 extern int CNF_GetSchedPriority(void);
 extern int CNF_GetLockMemory(void);
 
-extern void CNF_GetSmooth(double *max_freq, double *max_wander);
+extern void CNF_GetSmooth(double *max_freq, double *max_wander, int *leap_only);
 extern void CNF_GetTempComp(char **file, double *interval, char **point_file, double *T0, double *k0, double *k1, double *k2);
 
 extern char *CNF_GetUser(void);

configure

@@ -4,32 +4,12 @@
 # chronyd/chronyc - Programs for keeping computer clocks accurate.
 #
 # Copyright (C) Richard P. Curnow  1997-2003
-# Copyright (C) Miroslav Lichvar  2009, 2012-2014
+# Copyright (C) Miroslav Lichvar  2009, 2012-2015
 #
 # =======================================================================
 
 # This configure script determines the operating system type and version
 
-if [ "x${CC}" = "x" ]; then
-  MYCC="gcc"
-else
-  MYCC="${CC}"
-fi
-
-if [ "x${CFLAGS}" = "x" ]; then
-  MYCFLAGS="-O2 -g"
-else
-  MYCFLAGS="${CFLAGS}"
-fi
-
-MYCPPFLAGS="${CPPFLAGS}"
-
-if [ "x${MYCC}" = "xgcc" ]; then
-  MYCFLAGS="${MYCFLAGS} -Wmissing-prototypes -Wall"
-fi
-
-MYLDFLAGS="${LDFLAGS}"
-
 # ======================================================================
 # FUNCTIONS
 
@@ -41,7 +21,7 @@ test_code () {
   ldflags=$4
   code=$5
 
-  echo -n "Checking for $name : "
+  printf "%s" "Checking for $name : "
 
   (
     for h in $headers; do
@@ -113,7 +93,10 @@ For better control, use the options below.
   --disable-pps          Disable PPS refclock driver
   --disable-ipv6         Disable IPv6 support
   --disable-rtc          Don't include RTC even on Linux
-  --disable-linuxcaps    Disable libcap (Linux capabilities) support
+  --disable-privdrop     Disable support for dropping root privileges
+  --without-libcap       Don't use libcap even if it is available
+  --disable-scfilter     Disable support for system call filtering
+  --without-seccomp      Don't use seccomp even if it is available
   --disable-asyncdns     Disable asynchronous name resolving
   --disable-forcednsretry Don't retry on permanent DNS error
   --with-ntp-era=SECONDS Specify earliest assumed NTP time in seconds
@@ -131,6 +114,7 @@ Fine tuning of the installation directories:
   --mandir=DIR           man documentation [DATAROOTDIR/man]
   --docdir=DIR           documentation root [DATAROOTDIR/doc/chrony]
   --localstatedir=DIR    modifiable single-machine data [/var]
+  --chronysockdir=DIR    location for chrony sockets [LOCALSTATEDIR/run/chrony]
   --chronyvardir=DIR     location for chrony data [LOCALSTATEDIR/lib/chrony]
 
 Overriding system detection when cross-compiling:
@@ -174,12 +158,12 @@ get_features () {
   ff=1
   for f; do
     if [ "$ff" = "0" ]; then
-      echo -n " "
+      printf " "
     fi
     if grep "define FEAT_$f" config.h > /dev/null; then
-      echo -n "+$f"
+      printf "%s" "+$f"
     else
-      echo -n "-$f"
+      printf "%s" "-$f"
     fi
     ff=0
   done
@@ -213,7 +197,10 @@ try_tomcrypt=1
 feat_rtc=1
 try_rtc=0
 feat_droproot=1
-try_libcap=0
+try_libcap=-1
+try_clockctl=0
+feat_scfilter=1
+try_seccomp=-1
 readline_lib=""
 readline_inc=""
 ncurses_lib=""
@@ -283,6 +270,9 @@ do
     --localstatedir=* )
       SETLOCALSTATEDIR=`echo $option | sed -e 's/^.*=//;'`
     ;;
+    --chronysockdir=* )
+      SETCHRONYSOCKDIR=`echo $option | sed -e 's/^.*=//;'`
+    ;;
     --chronyvardir=* )
       SETCHRONYVARDIR=`echo $option | sed -e 's/^.*=//;'`
     ;;
@@ -307,9 +297,18 @@ do
     --disable-pps)
       feat_pps=0
     ;;
-    --disable-linuxcaps)
+    --disable-privdrop)
       feat_droproot=0
     ;;
+    --without-libcap|--disable-linuxcaps)
+      try_libcap=0
+    ;;
+    --disable-scfilter)
+      feat_scfilter=0
+    ;;
+    --without-seccomp)
+      try_seccomp=0
+    ;;
     --disable-asyncdns)
       feat_asyncdns=0
     ;;
@@ -356,71 +355,50 @@ rm -f config.h config.log
 
 SYSTEM=${OPERATINGSYSTEM}-${MACHINE}
 
-case $SYSTEM in
-    SunOS-sun4* )
-    case $VERSION in
-        4.* )
-            EXTRA_OBJECTS="sys_sunos.o strerror.o"
-            EXTRA_LIBS="-lkvm"
-            add_def SUNOS
-            echo "Configuring for SunOS (" $SYSTEM "version" $VERSION ")"
-        ;;
-        5.* )
-            EXTRA_OBJECTS="sys_solaris.o"
-            EXTRA_LIBS="-lsocket -lnsl -lkvm -lelf"
-            EXTRA_CLI_LIBS="-lsocket -lnsl"
-            add_def SOLARIS
-            echo "Configuring for Solaris (" $SYSTEM "SunOS version" $VERSION ")"
-        ;;
-    esac
-    ;;
-    Linux* )
-        EXTRA_OBJECTS="sys_generic.o sys_linux.o wrap_adjtimex.o"
-        try_libcap=1
+case $OPERATINGSYSTEM in
+    Linux)
+        EXTRA_OBJECTS="sys_generic.o sys_linux.o sys_timex.o"
+        [ $try_libcap != "0" ] && try_libcap=1
         try_rtc=1
+        [ $try_seccomp != "0" ] && try_seccomp=1
         try_setsched=1
         try_lockmem=1
         try_phc=1
         add_def LINUX
         echo "Configuring for " $SYSTEM
-        if [ "${MACHINE}" = "alpha" ]; then
-           echo "Enabling -mieee"
-           # FIXME: Should really test for GCC
-           MYCFLAGS="$MYCFLAGS -mieee"
-        fi
     ;;
 
-    BSD/386-i[3456]86|FreeBSD-i386|FreeBSD-amd64 )
-        # Antti Jrvinen <costello@iki.fi> reported that this system can
-        # be supported with the SunOS 4.x driver files.
-        EXTRA_OBJECTS="sys_sunos.o strerror.o"
-        EXTRA_LIBS="-lkvm"
-        add_def SUNOS
-        echo "Configuring for $SYSTEM (using SunOS driver)"
-    ;;
-    NetBSD-* )
-        EXTRA_OBJECTS="sys_netbsd.o"
-        EXTRA_LIBS="-lkvm"
-        SYSDEFS=""
+    FreeBSD)
+        EXTRA_OBJECTS="sys_generic.o sys_netbsd.o sys_timex.o"
+        add_def FREEBSD
         echo "Configuring for $SYSTEM"
     ;;
-    SunOS-i86pc* )                                          
-        # Doug Woodward <dougw@whistler.com> reported that this configuration
-        # works for Solaris 2.8 / SunOS 5.8 on x86 platforms
-        EXTRA_OBJECTS="sys_solaris.o"                
-        EXTRA_LIBS="-lsocket -lnsl -lkvm -lelf"      
-        EXTRA_CLI_LIBS="-lsocket -lnsl"                              
+    NetBSD)
+        EXTRA_OBJECTS="sys_generic.o sys_netbsd.o sys_timex.o"
+        try_clockctl=1
+        add_def NETBSD
+        echo "Configuring for $SYSTEM"
+    ;;
+    Darwin)
+        EXTRA_OBJECTS="sys_macosx.o"
+        EXTRA_LIBS="-lresolv"
+        EXTRA_CLI_LIBS="-lresolv"
+        add_def MACOSX
+        echo "Configuring for MacOS X (" $SYSTEM "MacOS X version" $VERSION ")"
+    ;;
+    SunOS)
+        EXTRA_OBJECTS="sys_generic.o sys_solaris.o sys_timex.o"
+        EXTRA_LIBS="-lsocket -lnsl -lresolv"
+        EXTRA_CLI_LIBS="-lsocket -lnsl -lresolv"
         add_def SOLARIS
+        # These are needed to have msg_control in struct msghdr
+        add_def __EXTENSIONS__
+        add_def _XOPEN_SOURCE 1
+        add_def _XOPEN_SOURCE_EXTENDED 1
         echo "Configuring for Solaris (" $SYSTEM "SunOS version" $VERSION ")" 
     ;;                                                                        
-    CYGWIN32_NT-i[3456]86 )
-        EXTRA_OBJECTS="sys_winnt.o"
-        EXTRA_LIBS=""
-        add_def WINNT
-        echo "Configuring for Windows NT (Cygwin32)"
-    ;;
     * )
-        echo "Sorry, I don't know how to build this software on your system."
+        echo "error: $SYSTEM is not supported (yet?)"
         exit 1
     ;;
 esac
@@ -453,6 +431,35 @@ if [ $feat_refclock = "1" ]; then
   EXTRA_OBJECTS="$EXTRA_OBJECTS refclock.o refclock_phc.o refclock_pps.o refclock_shm.o refclock_sock.o"
 fi
 
+MYCC="$CC"
+MYCFLAGS="$CFLAGS"
+MYCPPFLAGS="$CPPFLAGS"
+MYLDFLAGS="$LDFLAGS"
+
+if [ "x$MYCC" = "x" ]; then
+  MYCC=gcc
+  if ! test_code "$MYCC" '' '' '' ''; then
+    MYCC=cc
+    if ! test_code "$MYCC" '' '' '' ''; then
+      echo "error: no C compiler found"
+      exit 1
+    fi
+  fi
+else
+  if ! test_code "$MYCC" '' '' '' ''; then
+    echo "error: C compiler $MYCC cannot create executables"
+    exit 1
+  fi
+fi
+
+if [ "x$MYCFLAGS" = "x" ]; then
+  MYCFLAGS="-O2 -g"
+fi
+
+if [ "x$MYCC" = "xgcc" ]; then
+  MYCFLAGS="$MYCFLAGS -Wmissing-prototypes -Wall"
+fi
+
 if test_code '64-bit time_t' 'time.h' '' '' '
   char x[sizeof(time_t) > 4 ? 1 : -1] = {0};
   return x[0];'
@@ -465,7 +472,7 @@ then
   else
     split_seconds=`date '+%s'`
     if [ "x$split_seconds" = "" ]; then
-      echo "Could not get current time, --with-ntp-era option is needed"
+      echo "error: could not get current time, --with-ntp-era option is needed"
       exit 1
     fi
     split_days=$((50 * 365))
@@ -494,7 +501,7 @@ else
   if test_code 'math in -lm' 'math.h' '' '-lm' "$MATHCODE"; then
     LIBS="-lm"
   else
-    echo "Can't compile/link a program which uses sqrt(), log(), pow(), bailing out"
+    echo "error: could not compile/link a program which uses sqrt(), log(), pow()"
     exit 1
   fi
 fi
@@ -508,7 +515,7 @@ if test_code '<inttypes.h>' 'inttypes.h' '' '' ''; then
 fi
 
 if [ $feat_ipv6 = "1" ] && \
-  test_code 'IPv6 support' 'arpa/inet.h sys/socket.h netinet/in.h' '' '' '
+  test_code 'IPv6 support' 'arpa/inet.h sys/socket.h netinet/in.h' '' "$EXTRA_LIBS" '
     struct sockaddr_in6 n;
     char p[100];
     n.sin6_addr = in6addr_any;
@@ -529,7 +536,7 @@ then
   fi
 fi
 
-if test_code 'getaddrinfo()' 'sys/types.h sys/socket.h netdb.h' '' '' \
+if test_code 'getaddrinfo()' 'sys/types.h sys/socket.h netdb.h' '' "$EXTRA_LIBS" \
   'return getaddrinfo(0, 0, 0, 0);'
 then
   add_def HAVE_GETADDRINFO
@@ -579,6 +586,20 @@ then
     EXTRA_LIBS="$EXTRA_LIBS -lcap"
 fi
 
+if [ $feat_droproot = "1" ] && [ $try_clockctl = "1" ] && \
+  test_code '<sys/clockctl.h>' 'sys/clockctl.h' '' '' ''
+then
+  add_def FEAT_PRIVDROP
+fi
+
+if [ $feat_scfilter = "1" ] && [ $try_seccomp = "1" ] && \
+  test_code seccomp 'seccomp.h' '' '-lseccomp' \
+    'seccomp_init(SCMP_ACT_KILL);'
+then
+  add_def FEAT_SCFILTER
+  EXTRA_LIBS="$EXTRA_LIBS -lseccomp"
+fi
+
 if [ $feat_rtc = "1" ] && [ $try_rtc = "1" ] && \
   test_code '<linux/rtc.h>' 'sys/ioctl.h linux/rtc.h' '' '' \
     'ioctl(1, RTC_UIE_ON&RTC_UIE_OFF&RTC_RD_TIME&RTC_SET_TIME, 0&RTC_UF);'
@@ -752,6 +773,11 @@ if [ "x$SETLOCALSTATEDIR" != "x" ]; then
   LOCALSTATEDIR=$SETLOCALSTATEDIR
 fi
 
+CHRONYSOCKDIR=${LOCALSTATEDIR}/run/chrony
+if [ "x$SETCHRONYSOCKDIR" != "x" ]; then
+  CHRONYSOCKDIR=$SETCHRONYSOCKDIR
+fi
+
 CHRONYVARDIR=${LOCALSTATEDIR}/lib/chrony
 if [ "x$SETCHRONYVARDIR" != "x" ]; then
   CHRONYVARDIR=$SETCHRONYVARDIR
@@ -759,11 +785,12 @@ fi
 
 add_def DEFAULT_CONF_FILE "\"$SYSCONFDIR/chrony.conf\""
 add_def DEFAULT_USER "\"$default_user\""
+add_def DEFAULT_COMMAND_SOCKET "\"$CHRONYSOCKDIR/chronyd.sock\""
 add_def MAIL_PROGRAM "\"$mail_program\""
 
-common_features="`get_features ASYNCDNS IPV6 SECHASH`"
+common_features="`get_features IPV6 DEBUG`"
 chronyc_features="`get_features READLINE`"
-chronyd_features="`get_features CMDMON NTP REFCLOCK RTC PRIVDROP DEBUG`"
+chronyd_features="`get_features CMDMON NTP REFCLOCK RTC PRIVDROP SCFILTER SECHASH ASYNCDNS`"
 add_def CHRONYC_FEATURES "\"$chronyc_features $common_features\""
 add_def CHRONYD_FEATURES "\"$chronyd_features $common_features\""
 echo "Features : $chronyd_features $chronyc_features $common_features"
@@ -795,6 +822,7 @@ do
           s%@MANDIR@%${MANDIR}%;\
           s%@INFODIR@%${INFODIR}%;\
           s%@LOCALSTATEDIR@%${LOCALSTATEDIR}%;\
+          s%@CHRONYSOCKDIR@%${CHRONYSOCKDIR}%;\
           s%@CHRONYVARDIR@%${CHRONYVARDIR}%;\
           s%@DEFAULT_USER@%${default_user}%;"\
           < ${f}.in > $f

contrib/bryan_christianson_1/README.txt

@@ -0,0 +1,103 @@
+Notes for installing chrony on MacOS X
+Author: Bryan Christianson (bryan@whatroute.net)
+------------------------------------------------
+
+These files are for those admins/users who would prefer to install chrony
+from the source distribution and are intended as guidelines rather than
+being definitive. They can be edited with a plain text editor, such as
+vi, emacs or your favourite IDE (xcode)
+
+It is assumed you are comfortable with installing software from the
+terminal command line and know how to use sudo to acquire root access.
+
+If you are not familiar with the MacOS X command line then
+please consider using ChronyControl from http://whatroute.net/chronycontrol.html
+
+ChronyControl provides a gui wrapper for installing these files and sets the
+necessary permissions on each file.
+
+
+Install the chrony software
+---------------------------
+
+You will need xcode and the commandline additions to build and install chrony.
+These can be obtained from Apple's website via the App Store.
+
+cd to the chrony directory
+./configure
+make
+sudo make install
+
+chrony is now installed in default locations (/usr/local/sbin/chronyd,
+/usr/local/bin/chronyc)
+
+Create a chrony.conf file - see the chrony website for details
+
+The support files here assume the following directives are specified in the
+chrony.conf file
+
+keyfile /etc/chrony.d/chrony.keys
+driftfile /var/db/chrony/chrony.drift
+bindcmdaddress /var/db/chrony/chronyd.sock
+logdir /var/log/chrony
+dumpdir /var/db/chrony
+
+Install this file as /etc/chrony.d/chrony.conf and create
+the directories specified in the above directives if they don't exist.
+You will need root permissions to create the directories.
+
+
+Running chronyd
+---------------
+At this point chronyd *could* be run as a daemon. Apple discourage running
+daemons and their preferred method uses the launchd facility. The
+support files here provide a launchd configuration file for chronyd and also
+a shell script and launchd configuration file to rotate the chronyd logs on a daily basis.
+
+
+Support files
+-------------
+Dates and sizes may differ
+-rw-r--r--  1 yourname  staff  2084  4 Aug 22:54 README.txt
+-rwxr-xr-x  1 yourname  staff   676  4 Aug 21:18 chronylogrotate.sh
+-rw-r--r--  1 yourname  staff   543 18 Jul 20:10 org.tuxfamily.chronyc.plist
+-rw-r--r--  1 yourname  staff   511 19 Jun 18:30 org.tuxfamily.chronyd.plist
+
+If you have used chrony support directories other than those suggested, you
+will need to edit each file and make the appropriate changes.
+
+
+Installing the support files
+----------------------------
+
+1. chronylogrotate.sh
+This is a simple shell script that deletes old log files. Unfortunately because
+of the need to run chronyc, the standard MacOS X logrotation does not work with
+chrony logs.
+
+This script runs on a daily basis under control of launchd and should be
+installed in the /usr/local/bin directory
+
+sudo cp chronylogrotate.sh /usr/local/bin
+sudo chmod +x /usr/local/bin/chronylogrotate.sh
+sudo chown root:wheel /usr/local/bin/chronylogrotate.sh
+
+
+2. org.tuxfamily.chronyc.plist
+This file is the launchd plist that runs logrotation each day. You may
+wish to edit this file to change the time of day at which the rotation
+will run, currently 04:05 am
+
+sudo cp org.tuxfamily.chronyc.plist /Library/LaunchDaemons
+sudo chown root:wheel /Library/LaunchDaemons/org.tuxfamily.chronyc.plist
+sudo chmod 0644 /Library/LaunchDaemons/org.tuxfamily.chronyc.plist
+sudo launchctl load -w /Library/LaunchDaemons/org.tuxfamily.chronyc.plist
+
+
+3. org.tuxfamily.chronyd.plist
+This file is the launchd plist that runs chronyd when the Macintosh starts.
+
+sudo cp org.tuxfamily.chronyd.plist /Library/LaunchDaemons
+sudo chown root:wheel /Library/LaunchDaemons/org.tuxfamily.chronyd.plist
+sudo chmod 0644 /Library/LaunchDaemons/org.tuxfamily.chronyd.plist
+sudo launchctl load -w /Library/LaunchDaemons/org.tuxfamily.chronyd.plist

contrib/bryan_christianson_1/chronylogrotate.sh

@@ -0,0 +1,45 @@
+#!/bin/sh
+
+#  chronylogrotate.sh
+#  ChronyControl
+#
+#  Created by Bryan Christianson on 12/07/15.
+#
+
+LOGDIR=/var/log/chrony
+
+if [ ! -e "$LOGDIR" ]; then
+  echo "missing directory: $LOGDIR"
+  exit 1
+fi
+
+cd $LOGDIR
+
+rotate () {
+  prefix=$1
+
+  rm -f $prefix.log.10
+
+  for (( count=9; count>= 0; count-- ))
+  do
+    next=$(( $count+1 ))
+    if [ -f $prefix.log.$count ]; then
+      mv $prefix.log.$count $prefix.log.$next
+    fi
+  done
+
+  if [ -f $prefix.log ]; then
+    mv $prefix.log $prefix.log.0
+  fi
+}
+
+rotate measurements
+rotate statistics
+rotate tracking
+
+#
+# signal chronyd via chronyc
+
+/usr/local/bin/chronyc -a -f /etc/chrony.d/chrony.conf cyclelogs > /dev/null
+
+exit $?

contrib/bryan_christianson_1/org.tuxfamily.chronyc.plist

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+	<key>Label</key>
+	<string>org.tuxfamily.logrotate</string>
+	<key>KeepAlive</key>
+	<false/>
+	<key>ProgramArguments</key>
+	<array>
+		<string>/bin/sh</string>
+		<string>/usr/local/bin/chronylogrotate.sh</string>
+	</array>
+	<key>StartCalendarInterval</key>
+	<dict>
+		<key>Minute</key>
+		<integer>5</integer>
+		<key>Hour</key>
+		<integer>4</integer>
+	</dict>
+</dict>
+</plist>

contrib/bryan_christianson_1/org.tuxfamily.chronyd.plist

@@ -0,0 +1,19 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+	<key>Label</key>
+	<string>org.tuxfamily.chronyd</string>
+	<key>Program</key>
+	<string>/usr/local/sbin/chronyd</string>
+	<key>ProgramArguments</key>
+	<array>
+		<string>chronyd</string>
+		<string>-n</string>
+		<string>-f</string>
+		<string>/private/etc/chrony.d/chrony.conf</string>
+	</array>
+	<key>KeepAlive</key>
+	<true/>
+</dict>
+</plist>

doc/faq.adoc

@@ -0,0 +1,341 @@
+:toc:
+:numbered:
+
+Frequently Asked Questions
+==========================
+
+== +chrony+ compared to other programs
+
+=== How does +chrony+ compare to +ntpd+?
+
++chronyd+ was designed to work well in a wide range of conditions and it can
+usually synchronise the system clock faster and with better time accuracy.  It
+doesn't implement some of the less useful NTP modes like broadcast client or
+multicast server/client.
+
+For a more detailed comparison of features and performance, see the
+http://chrony.tuxfamily.org/comparison.html[comparison page] on the +chrony+
+website and the
+http://chrony.tuxfamily.org/manual.html#Comparison-with-ntpd[Comparison with
+ntpd] section in the manual.
+
+If your computer is connected to the internet only for few minutes at a time,
+the network connection is often congested, you turn your computer off or
+suspend it frequently, the clock is not very stable (e.g. there are rapid
+changes in the temperature or it's a virtual machine), or you want to use NTP
+on an isolated network with no hardware reference clocks in sight, +chrony+
+will probably work much better for you.
+
+The original reason +chrony+ was written was that +ntpd+ (called +xntpd+ at the
+time) could not to do anything sensible on a PC which was connected to the 'net
+only for about 5 minutes once or twice a day, mainly to upload/download email
+and news.  The requirements were
+
+* slew the time to correct it when going online and NTP servers
+  become visible
+* determine the rate at which the computer gains or loses time and
+  use this information to keep it reasonably correct between connects
+  to the 'net.  This has to be done using a method that does not care
+  about the intermittent availability of the references or the fact
+  the computer is turned off between groups of measurements.
+* maintain the time across reboots, by working out the error and
+  drift rate of the computer's real-time clock and using this
+  information to set the system clock correctly at boot up.
+
+Also, when working with isolated networks with no true time references at all
++ntpd+ was found to give no help with managing the local clock's gain/loss rate
+on the NTP master node (which was set from watch).  Some automated support was
+added to +chrony+ to deal with this.
+
+== Configuration issues
+
+=== I have several computers on a LAN. Should be all clients of an external server?
+
+The best configuration is usually to make one computer the master, with
+the others as clients of it.  Add a +local+ directive to the master's
+'chrony.conf' file.  This configuration will be better because
+
+* the load on the external connection is less
+* the load on the external NTP server(s) is less
+* if your external connection goes down, the computers on the LAN
+  will maintain a common time with each other.
+
+=== Must I specify servers by IP address if DNS is not available on chronyd start?
+
+No.  Starting from version 1.25, +chronyd+ will keep trying to resolve
+the hostnames specified in the +server+ and +peer+ directives in
+increasing intervals until it succeeds.  The +online+ command can be
+issued from +chronyc+ to try to resolve them immediately.
+
+=== How can I make +chronyd+ more secure?
+
+If you don't need to serve time to NTP clients or peers, you can add +port 0+
+to the 'chrony.conf' file to completely disable the NTP server functionality
+and prevent NTP requests from reaching +chronyd+. Starting from version 2.0,
+the NTP server port is open only when client access is allowed by the +allow+
+directive or command, an NTP peer is configured, or the +broadcast+ directive
+is used.
+
+If you don't need to use +chronyc+ remotely, you can add the following
+directives to the configuration file to bind the command sockets to the
+loopback interface.  This is done by default since version 2.0.
+
+----
+bindcmdaddress 127.0.0.1
+bindcmdaddress ::1
+----
+
+If you don't need to use +chronyc+ at all or you need to run +chronyc+ only
+under the root or chrony user (which can access +chronyd+ through a Unix domain
+socket since version 2.2), you can disable the internet command sockets
+completely by adding +cmdport 0+ to the configuration file.
+
+On Linux, if +chronyd+ is compiled with support for Linux capabilities
+(available in the libcap library), or on NetBSD with the +/dev/clockctl+
+device, you can specify an unprivileged user with the +-u+ option or +user+
+directive in the 'chrony.conf' file to drop root privileges after start.  The
+configure option +--with-user+ can be used to drop the privileges by default.
+
+Also, if +chronyd+ is compiled with support for the Linux secure computing
+(seccomp) facility, you can enable a system call filter with the +-F+ option.
+It will significantly reduce the kernel attack surface and possibly prevent
+kernel exploits from the +chronyd+ process if compromised.  The filter
+shouldn't be enabled without testing that it allows all system calls needed
+with the specific configuration and libraries that +chronyd+ is using (e.g.
+libc and its NSS configuration).  If +chronyd+ is getting killed, some system
+call is missing and the filter has to be disabled until it's patched to allow
+that call.
+
+=== How can I improve the accuracy of the system clock with NTP sources?
+
+Select NTP servers that are well synchronised, stable and close to your
+network.  It's better to use more than one server, three or four is usually
+recommended as the minimum, so +chronyd+ can detect falsetickers and combine
+measurements from multiple sources.
+
+There are also useful options which can be set in the +server+ directive, they
+are +minpoll+, +maxpoll+, +polltarget+, +maxdelay+, +maxdelayratio+ and
++maxdelaydevratio+.
+
+The first three options set the minimum and maximum allowed polling interval,
+and how should be the actual interval adjusted in the specified range.  Their
+default values are 6 (64 seconds) for +minpoll+, 10 (1024 seconds) for
++maxpoll+ and 6 (samples) for +polltarget+.  The default values should be used
+for general servers on the internet.  With your own NTP servers or if have
+permission to poll some servers more frequently, setting these options for
+shorter polling intervals may significantly improve the accuracy of the system
+clock.
+
+The optimal polling interval depends on many factors, including the ratio
+between the wander of the clock and the network jitter (sometimes expressed in
+NTP documents as the Allan intercept), the temperature sensitivity of the
+crystal oscillator and the maximum rate of change of the temperature.
+
+An example of the directive for an NTP server on the internet that you are
+allowed to poll frequently could be
+
+----
+server foo.example.net minpoll 4 maxpoll 6 polltarget 16
+----
+
+An example using very short polling intervals for a server located in the same
+LAN could be
+
+----
+server ntp.local minpoll 2 maxpoll 4 polltarget 30
+----
+
+The maxdelay options are useful to ignore measurements with larger delay (e.g.
+due to congestion in the network) and improve the stability of the
+synchronisation.  The +maxdelaydevratio+ option could be added to the example
+with local NTP server
+
+----
+server ntp.local minpoll 2 maxpoll 4 polltarget 30 maxdelaydevratio 2
+----
+
+=== What happened to the +commandkey+ and +generatecommandkey+ directives?
+
+They were removed in version 2.2.  Authentication is no longer supported in the
+command protocol.  Commands that required authentication are now allowed only
+through a Unix domain socket, which is accessible only by the root and chrony
+users.  If you need to configure +chronyd+ remotely or locally without the root
+password, please consider using ssh and/or sudo to run +chronyc+ under the root
+or chrony user on the same host as +chronyd+ is running.
+
+== Computer is not synchronising
+
+This is the most common problem.  There are a number of reasons, see the
+following questions.
+
+=== Behind a firewall?
+
+If there is a firewall between you and the NTP server you're trying to use, the
+packets may be blocked.  Try using a tool like +wireshark+ or +tcpdump+ to see if
+you're getting responses from the server.  If you have an external modem, see
+if the receive light blinks straight after the transmit light (when the link is
+quiet apart from the NTP traffic.)  Try adding +log measurements+ to the
+'chrony.conf' file and look in the 'measurements.log' file after +chronyd+ has
+been running for a short period. See if any measurements appear.
+
+=== Are NTP servers specified with the +offline+ option?
+
+Check that you're using +chronyc+\'s +online+ and +offline+ commands
+appropriately.  Again, check in 'measurements.log' to see if you're getting any
+data back from the server.
+
+=== Is +chronyd+ allowed to step the system clock?
+
+By default, +chronyd+ adjusts the clock gradually by slowing it down or
+speeding it up.  If the clock is too far from the correct time, it will take
+a long time to correct the error.  The +System time+ value printed by the
++chronyc+'s +tracking+ command is the remaining correction that needs to be
+applied to the system clock.
+
+The +makestep+ directive can be used to allow +chronyd+ to step the clock. For
+example, if 'chrony.conf' had
+
+----
+makestep 1 3
+----
+
+the clock would be stepped in the first three updates if its offset was larger
+than one second.  Normally, it's recommended to allow the step only in the
+first few updates, but in some cases (e.g. a computer without RTC or virtual
+machine which can be suspended and resumed with incorrect time) it may be
+necessary to allow the step at any clock update.  The example above would
+change to
+
+----
+makestep 1 -1
+----
+
+== Issues with +chronyc+
+
+=== I keep getting the error +506 Cannot talk to daemon+
+
+When accessing +chronyd+ remotely, make sure that the 'chrony.conf' file (on
+the computer where +chronyd+ is running) has a 'cmdallow' entry for the
+computer you are running +chronyc+ on and an appropriate 'bindcmdaddress'
+directive.  This isn't necessary for localhost.
+
+Perhaps +chronyd+ is not running.  Try using the +ps+ command (e.g.  on Linux,
++ps -auxw+) to see if it's running.  Or try +netstat -a+ and see if the ports
+123/udp and 323/udp are listening.  If +chronyd+ is not running, you may have a
+problem with the way you are trying to start it (e.g.  at boot time).
+
+Perhaps you have a firewall set up in a way that blocks packets on port
+323/udp.  You need to amend the firewall configuration in this case.
+
+=== I keep getting the error +501 Not authorised+
+
+Since version 2.2, the +password+ command doesn't do anything and +chronyc+
+needs to run under the root or chrony user, which are allowed to access the
+Unix domain command socket.
+
+=== Is the +chronyc+ / +chronyd+ protocol documented anywhere?
+
+Only by the source code :-) See 'cmdmon.c' (+chronyd+ side) and 'client.c'
+(+chronyc+ side).
+
+== Real-time clock issues
+
+=== What is the real-time clock (RTC)?
+
+This is the clock which keeps the time even when your computer is turned off.
+It is used to initialize the system clock on boot. It normally doesn't drift
+more than few seconds per day.
+
+There are two approaches how +chronyd+ can work with it.  One is to use the
++rtcsync+ directive, which tells +chronyd+ to enable a kernel mode which sets
+the RTC from the system clock every 11 minutes.  +chronyd+ itself won't touch
+the RTC.  If the computer is not turned off for a long time, the RTC should
+still be close to the true time when the system clock will be initialized from
+it on the next boot.
+
+The other option is to use the +rtcfile+ directive, which will tell +chronyd+
+to monitor the rate at which the RTC gains or loses time.  When +chronyd+ is
+started with the +-s+ option on the next boot, it will set the system time from
+the RTC and also compensate for the drift it has measured previously.  The
++rtcautotrim+ directive can be used to keep the RTC close to the true time, but
+it's not strictly necessary if its only purpose is to set the system clock when
++chronyd+ is started on boot.  See the documentation for details.
+
+=== I want to use +chronyd+'s RTC support. Must I disable +hwclock+?
+
+The +hwclock+ program is often set-up by default in the boot and shutdown
+scripts with many Linux installations.  With the kernel RTC synchronisation
+(+rtcsync+ directive), the RTC will be set also every 11 minutes as long as the
+system clock is synchronised.  If you want to use +chronyd+'s RTC monitoring
+(+rtcfile+ directive), it's important to disable +hwclock+ in the shutdown
+procedure.  If you don't, it will over-write the RTC with a new value, unknown
+to +chronyd+.  At the next reboot, +chronyd+ started with the +-s+ option will
+compensate this (wrong) time with its estimate of how far the RTC has drifted
+whilst the power was off, giving a meaningless initial system time.
+
+There is no need to remove +hwclock+ from the boot process, as long as +chronyd+
+is started after it has run.
+
+=== I just keep getting the +513 RTC driver not running+ message
+
+For the real time clock support to work, you need the following three
+things
+
+* a kernel that is supported (e.g. 2.2 onwards)
+* enhanced RTC support compiled into the kernel
+* an +rtcfile+ directive in your 'chrony.conf' file
+
+== NTP-specific issues
+
+=== Can +chronyd+ be driven from broadcast NTP servers?
+
+No, the broadcast client mode is not supported and there is currently no plan
+to implement it.  The broadcast and multicast modes are inherently less
+accurate and less secure (even with authentication) than the ordinary
+server/client mode and they are not as useful as they used to be.  Even with
+very modest hardware a single NTP server can serve time to hundreds of
+thousands of clients using the ordinary mode.
+
+=== Can +chronyd+ transmit broadcast NTP packets?
+
+Yes, the +broadcast+ directive can be used to enable the broadcast server mode
+to serve time to clients in the network which support the broadcast client mode
+(it's not supported in +chronyd+, see the previous question).
+
+=== Can +chronyd+ keep the system clock a fixed offset away from real time?
+
+This is not possible as the program currently stands.
+
+=== What happens if the network connection is dropped without using +chronyc+'s +offline+ command first?
+
++chronyd+ will keep trying to access the server(s) that it thinks are online.
+When the network is connected again, it will take some time (on average half of
+the current polling interval) before new measurements are made and the clock is
+corrected. If the servers were set to offline and the +online+ command was
+issued when the network was connected, +chronyd+ would make new measurements
+immediately.
+
+The +auto_offline+ option to the +server+ entry in the 'chrony.conf' file may
+be useful to switch the servers to the offline state automatically.
+
+== Linux-specific issues
+
+=== I get +Could not open /dev/rtc, Device or resource busy+ in my syslog file
+
+Some other program running on the system may be using the device.
+
+== Microsoft Windows
+
+=== Does +chrony+ support Windows?
+
+No.  The +chronyc+ program (the command-line client used for configuring
++chronyd+ while it is running) has been successfully built and run under
+Cygwin in the past.  +chronyd+ is not portable, because part of it is
+very system-dependent.  It needs adapting to work with Windows'
+equivalent of the adjtimex() call, and it needs to be made to work as a
+service.
+
+=== Are there any plans to support Windows?
+
+We have no plans to do this.  Anyone is welcome to pick this work up and
+contribute it back to the project.

examples/chrony.conf.example2

@@ -18,14 +18,8 @@ rtcsync
 # Serve time even if not synchronized to any NTP server.
 #local stratum 10
 
-# Specify file containing keys for NTP and command authentication.
-keyfile /etc/chrony.keys
-
-# Specify key number for command authentication.
-commandkey 1
-
-# Generate new command key on start if missing.
-generatecommandkey
+# Specify file containing keys for NTP authentication.
+#keyfile /etc/chrony.keys
 
 # Disable logging of client accesses.
 noclientlog

examples/chrony.conf.example3

@@ -95,24 +95,10 @@
 
 driftfile /var/lib/chrony/drift
 
-# If you want to use the program called chronyc to configure aspects of
-# chronyd's operation once it is running (e.g. tell it the Internet link
-# has gone up or down), you need a password.  This is stored in the
-# following keys file.  (You also need keys to support authenticated NTP
-# exchanges between cooperating machines.)  Again, this option is
-# assumed by default.
+# If you want to enable NTP authentication with symmetric keys, you will need
+# to uncomment the following line and edit the file to set up the keys.
 
-keyfile /etc/chrony.keys
-
-# Tell chronyd which numbered key in the file is used as the password
-# for chronyc. (You can pick any integer up to 2**32-1.  '1' is just a
-# default.  Using another value will _NOT_ increase security.)
-
-commandkey 1
-
-# With this directive a random password will be generated automatically.
-
-generatecommandkey
+! keyfile /etc/chrony.keys
 
 # chronyd can save the measurement history for the servers to files when
 # it it exits.  This is useful in 2 situations:
@@ -262,11 +248,6 @@ generatecommandkey
 # syntax and meaning is the same as for 'allow' and 'deny', except that
 # 'cmdallow' and 'cmddeny' control access to the chronyd's command port.
 
-# NOTE, even if the host where you run chronyc is granted access, you
-# still need a command key set up and you have to know the password to
-# put into chronyc to allow you to modify chronyd's parameters.  By
-# default all you can do is view information about chronyd's operation.
-
 #######################################################################
 ### REAL TIME CLOCK
 # chronyd can characterise the system's real-time clock.  This is the

examples/chrony.keys.example

@@ -1,29 +1,15 @@
-#######################################################################
+# This is an example chrony keys file.  It is used for NTP authentication with
+# symmetric keys.  It should be readable only by root or the user to which
+# chronyd is configured to switch to.
 #
-# This is an example chrony keys file.  You should copy it to /etc/chrony.keys
-# after editing it to set up the key(s) you want to use.  It should be readable
-# only by root or the user chronyd drops the root privileges to.  In most
-# situations, you will require a single key (the 'commandkey') so that you can
-# supply a password to chronyc to enable you to modify chronyd's operation
-# whilst it is running.
-#
-# Copyright 2002 Richard P. Curnow
-#
-######################################################################
+# Don't use the example keys!  The keys need to be random for maximum security.
+# These shell commands can be used to generate random MD5 and SHA1 keys on
+# systems which have the /dev/urandom device:
+# echo "1 MD5 HEX:$(tr -d -c '[:xdigit:]' < /dev/urandom | head -c 32)"
+# echo "1 SHA1 HEX:$(tr -d -c '[:xdigit:]' < /dev/urandom | head -c 40)"
 
 # Examples of valid keys:
 
 #1 ALongAndRandomPassword
 #2 MD5 HEX:B028F91EA5C38D06C2E140B26C7F41EC
 #3 SHA1 HEX:1DC764E0791B11FA67EFC7ECBC4B0D73F68A070C
-
-# The keys should be random for maximum security.  If you wanted to use a key
-# with ID 1 as your commandkey (i.e. chronyc password) you would put
-# "commandkey 1" into chrony.conf.  If no commandkey is present in the keys
-# file and the generatecommandkey directive is specified in chrony.conf,
-# a random commandkey will be generated and added to the keys file
-# automatically on chronyd start.
-
-# You might want to define more keys if you use the authentication facility
-# in the network time protocol to authenticate request/response packets between
-# trusted clients and servers.

examples/chrony.logrotate

@@ -3,6 +3,6 @@
     nocreate
     sharedscripts
     postrotate
-        /usr/bin/chronyc -a cyclelogs > /dev/null 2>&1 || true
+        /usr/bin/chronyc cyclelogs > /dev/null 2>&1 || true
     endscript
 }

examples/chrony.nm-dispatcher

@@ -6,12 +6,12 @@ export LC_ALL=C
 
 if [ "$2" = "up" ]; then
 	/sbin/ip route list dev "$1" | grep -q '^default' &&
-		/usr/bin/chronyc -a online > /dev/null 2>&1
+		/usr/bin/chronyc online > /dev/null 2>&1
 fi
 
 if [ "$2" = "down" ]; then
 	/sbin/ip route list | grep -q '^default' ||
-		/usr/bin/chronyc -a offline > /dev/null 2>&1
+		/usr/bin/chronyc offline > /dev/null 2>&1
 fi
 
 exit 0

examples/chrony.spec

@@ -45,7 +45,6 @@ cp chrony.info* $RPM_BUILD_ROOT%{_infodir}
 %{_sbindir}/chronyd
 %{_bindir}/chronyc
 %{_infodir}/chrony.info*
-%{_mandir}/man1/chrony.1.gz
 %{_mandir}/man1/chronyc.1.gz
 %{_mandir}/man5/chrony.conf.5.gz
 %{_mandir}/man8/chronyd.8.gz

getdate.y

@@ -8,12 +8,7 @@
 **  This code is in the public domain and has no copyright.
 */
 
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-# ifdef HAVE_ALLOCA_H
-#  include <alloca.h>
-# endif
-#endif
+#include "config.h"
 
 /* Since the code of getdate.y is not included in the Emacs executable
    itself, there is no need to #define static in this file.  Even if

hash_nss.c

@@ -25,11 +25,12 @@
 
   */
 
+#include "config.h"
+
 #include <nss.h>
 #include <hasht.h>
 #include <nsslowhash.h>
 
-/* #include "config.h" */
 #include "hash.h"
 
 static NSSLOWInitContext *ictx;

keys.c

@@ -50,72 +50,12 @@ typedef struct {
 
 static ARR_Instance keys;
 
-static int command_key_valid;
-static uint32_t command_key_id;
 static int cache_valid;
 static uint32_t cache_key_id;
 static int cache_key_pos;
 
 /* ================================================== */
 
-static int
-generate_key(uint32_t key_id)
-{
-#ifdef FEAT_SECHASH
-  unsigned char key[20];
-  const char *hashname = "SHA1";
-#else
-  unsigned char key[16];
-  const char *hashname = "MD5";
-#endif
-  const char *key_file, *rand_dev = "/dev/urandom";
-  FILE *f;
-  struct stat st;
-  int i;
-
-  key_file = CNF_GetKeysFile();
-
-  if (!key_file)
-    return 0;
-
-  f = fopen(rand_dev, "r");
-  if (!f || fread(key, sizeof (key), 1, f) != 1) {
-    if (f)
-      fclose(f);
-    LOG_FATAL(LOGF_Keys, "Could not read %s", rand_dev);
-    return 0;
-  }
-  fclose(f);
-
-  f = fopen(key_file, "a");
-  if (!f) {
-    LOG_FATAL(LOGF_Keys, "Could not open keyfile %s for writing", key_file);
-    return 0;
-  }
-
-  /* Make sure the keyfile is not world-readable */
-  if (stat(key_file, &st) || chmod(key_file, st.st_mode & 0770)) {
-    fclose(f);
-    LOG_FATAL(LOGF_Keys, "Could not change permissions of keyfile %s", key_file);
-    return 0;
-  }
-
-  fprintf(f, "\n%"PRIu32" %s HEX:", key_id, hashname);
-  for (i = 0; i < sizeof (key); i++)
-    fprintf(f, "%02hhX", key[i]);
-  fprintf(f, "\n");
-  fclose(f);
-
-  /* Erase the key from stack */
-  memset(key, 0, sizeof (key));
-
-  LOG(LOGS_INFO, LOGF_Keys, "Generated key %"PRIu32, key_id);
-
-  return 1;
-}
-
-/* ================================================== */
-
 static void
 free_keys(void)
 {
@@ -125,7 +65,6 @@ free_keys(void)
     Free(((Key *)ARR_GetElement(keys, i))->val);
 
   ARR_SetSize(keys, 0);
-  command_key_valid = 0;
   cache_valid = 0;
 }
 
@@ -135,14 +74,8 @@ void
 KEY_Initialise(void)
 {
   keys = ARR_CreateInstance(sizeof (Key));
-  command_key_valid = 0;
   cache_valid = 0;
   KEY_Reload();
-
-  if (CNF_GetGenerateCommandKey() && !KEY_KeyKnown(KEY_GetCommandKey())) {
-    if (generate_key(KEY_GetCommandKey()))
-      KEY_Reload();
-  }
 }
 
 /* ================================================== */
@@ -334,18 +267,6 @@ get_key_by_id(uint32_t key_id)
 
 /* ================================================== */
 
-uint32_t
-KEY_GetCommandKey(void)
-{
-  if (!command_key_valid) {
-    command_key_id = CNF_GetCommandKey();
-  }
-
-  return command_key_id;
-}
-
-/* ================================================== */
-
 int
 KEY_KeyKnown(uint32_t key_id)
 {

keys.h

@@ -34,8 +34,6 @@ extern void KEY_Finalise(void);
 
 extern void KEY_Reload(void);
 
-extern uint32_t KEY_GetCommandKey(void);
-
 extern int KEY_GetKey(uint32_t key_id, char **key, int *len);
 extern int KEY_KeyKnown(uint32_t key_id);
 extern int KEY_GetAuthDelay(uint32_t key_id);

local.c

@@ -564,6 +564,9 @@ LCL_NotifyLeap(int leap)
   LCL_ReadRawTime(&raw);
   LCL_CookTime(&raw, &cooked, NULL);
 
+  /* Smooth the leap second out */
+  SMT_Leap(&cooked, leap);
+
   /* Dispatch to all handlers as if the clock was stepped */
   invoke_parameter_change_handlers(&raw, &cooked, 0.0, -leap, LCL_ChangeStep);
 }

logging.c

@@ -31,7 +31,6 @@
 
 #include "conf.h"
 #include "logging.h"
-#include "mkdirpp.h"
 #include "util.h"
 
 /* This is used by DEBUG_LOG macro */
@@ -49,10 +48,6 @@ static int parent_fd = 0;
 #define DEBUG_LEVEL_PRINT_DEBUG 2
 static int debug_level = 0;
 
-#ifdef WINNT
-static FILE *logfile;
-#endif
-
 struct LogFile {
   const char *name;
   const char *banner;
@@ -74,10 +69,6 @@ void
 LOG_Initialise(void)
 {
   initialised = 1;
-
-#ifdef WINNT
-  logfile = fopen("./chronyd.err", "a");
-#endif
 }
 
 /* ================================================== */
@@ -86,15 +77,9 @@ LOG_Initialise(void)
 void
 LOG_Finalise(void)
 {
-#ifdef WINNT
-  if (logfile) {
-    fclose(logfile);
-  }
-#else
   if (system_log) {
     closelog();
   }
-#endif
 
   LOG_CycleLogFiles();
 
@@ -105,11 +90,6 @@ LOG_Finalise(void)
 
 static void log_message(int fatal, LOG_Severity severity, const char *message)
 {
-#ifdef WINNT
-  if (logfile) {
-    fprintf(logfile, fatal ? "Fatal error : %s\n" : "%s\n", message);
-  }
-#else
   if (system_log) {
     int priority;
     switch (severity) {
@@ -135,32 +115,33 @@ static void log_message(int fatal, LOG_Severity severity, const char *message)
   } else {
     fprintf(stderr, fatal ? "Fatal error : %s\n" : "%s\n", message);
   }
-#endif
 }
 
 /* ================================================== */
 
-void LOG_Message(LOG_Severity severity, LOG_Facility facility,
-                 int line_number, const char *filename,
-                 const char *function_name, const char *format, ...)
+void LOG_Message(LOG_Severity severity,
+#if DEBUG > 0
+                 LOG_Facility facility, int line_number,
+                 const char *filename, const char *function_name,
+#endif
+                 const char *format, ...)
 {
   char buf[2048];
   va_list other_args;
   time_t t;
   struct tm stm;
 
-#ifdef WINNT
-#else
   if (!system_log) {
     /* Don't clutter up syslog with timestamps and internal debugging info */
     time(&t);
     stm = *gmtime(&t);
     strftime(buf, sizeof(buf), "%Y-%m-%dT%H:%M:%SZ", &stm);
     fprintf(stderr, "%s ", buf);
+#if DEBUG > 0
     if (debug_level >= DEBUG_LEVEL_PRINT_FUNCTION)
       fprintf(stderr, "%s:%d:(%s) ", filename, line_number, function_name);
-  }
 #endif
+  }
 
   va_start(other_args, format);
   vsnprintf(buf, sizeof(buf), format, other_args);
@@ -198,11 +179,8 @@ void LOG_Message(LOG_Severity severity, LOG_Facility facility,
 void
 LOG_OpenSystemLog(void)
 {
-#ifdef WINNT
-#else
   system_log = 1;
   openlog("chronyd", LOG_PID, LOG_DAEMON);
-#endif
 }
 
 /* ================================================== */
@@ -300,20 +278,6 @@ LOG_FileWrite(LOG_FileID id, const char *format, ...)
 
 /* ================================================== */
 
-void
-LOG_CreateLogFileDir(void)
-{
-  const char *logdir;
-
-  logdir = CNF_GetLogDir();
-
-  if (!mkdir_and_parents(logdir)) {
-    LOG(LOGS_ERR, LOGF_Logging, "Could not create directory %s", logdir);
-  }
-}
-
-/* ================================================== */
-
 void
 LOG_CycleLogFiles(void)
 {

logging.h

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2002
- * Copyright (C) Miroslav Lichvar  2013-2014
+ * Copyright (C) Miroslav Lichvar  2013-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -45,18 +45,28 @@ extern int log_debug_enabled;
 #define FORMAT_ATTRIBUTE_PRINTF(str, first)
 #endif
 
+#if DEBUG > 0
+#define LOG_MESSAGE(severity, facility, ...) \
+  LOG_Message(LOGS_DEBUG, facility, __LINE__, __FILE__, FUNCTION_NAME, __VA_ARGS__);
+#else
+#define LOG_MESSAGE(severity, facility, ...) \
+  LOG_Message(severity, __VA_ARGS__);
+#endif
+
 #define DEBUG_LOG(facility, ...) \
   do { \
     if (DEBUG && log_debug_enabled) \
-      LOG_Message(LOGS_DEBUG, facility, __LINE__, __FILE__, FUNCTION_NAME, __VA_ARGS__); \
+      LOG_MESSAGE(LOGS_DEBUG, facility, __VA_ARGS__); \
   } while (0)
-#define LOG(severity, facility, ...) LOG_Message(severity, facility, __LINE__, __FILE__, FUNCTION_NAME, __VA_ARGS__)
+
 #define LOG_FATAL(facility, ...) \
   do { \
-    LOG_Message(LOGS_FATAL, facility, __LINE__, __FILE__, FUNCTION_NAME, __VA_ARGS__); \
+    LOG_MESSAGE(LOGS_FATAL, facility, __VA_ARGS__); \
     exit(1); \
   } while (0)
 
+#define LOG(severity, facility, ...) LOG_MESSAGE(severity, facility, __VA_ARGS__)
+
 /* Definition of severity */
 typedef enum {
   LOGS_INFO,
@@ -81,6 +91,7 @@ typedef enum {
   LOGF_Util,
   LOGF_Main,
   LOGF_Memory,
+  LOGF_Client,
   LOGF_ClientLog,
   LOGF_Configure,
   LOGF_CmdMon,
@@ -94,9 +105,11 @@ typedef enum {
   LOGF_Sys,
   LOGF_SysGeneric,
   LOGF_SysLinux,
+  LOGF_SysMacOSX,
   LOGF_SysNetBSD,
   LOGF_SysSolaris,
   LOGF_SysSunOS,
+  LOGF_SysTimex,
   LOGF_SysWinnt,
   LOGF_TempComp,
   LOGF_RtcLinux,
@@ -111,10 +124,15 @@ extern void LOG_Initialise(void);
 extern void LOG_Finalise(void);
 
 /* Line logging function */
+#if DEBUG > 0
 FORMAT_ATTRIBUTE_PRINTF(6, 7)
 extern void LOG_Message(LOG_Severity severity, LOG_Facility facility,
                         int line_number, const char *filename,
                         const char *function_name, const char *format, ...);
+#else
+FORMAT_ATTRIBUTE_PRINTF(2, 3)
+extern void LOG_Message(LOG_Severity severity, const char *format, ...);
+#endif
 
 /* Set debug level:
    0, 1 - only non-debug messages are logged
@@ -141,7 +159,6 @@ extern LOG_FileID LOG_FileOpen(const char *name, const char *banner);
 FORMAT_ATTRIBUTE_PRINTF(2, 3)
 extern void LOG_FileWrite(LOG_FileID id, const char *format, ...);
 
-extern void LOG_CreateLogFileDir(void);
 extern void LOG_CycleLogFiles(void);
 
 #endif /* GOT_LOGGING_H */

main.c

@@ -4,7 +4,7 @@
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
  * Copyright (C) John G. Hasler  2009
- * Copyright (C) Miroslav Lichvar  2012-2014
+ * Copyright (C) Miroslav Lichvar  2012-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -51,6 +51,7 @@
 #include "nameserv.h"
 #include "smooth.h"
 #include "tempcomp.h"
+#include "util.h"
 
 /* ================================================== */
 
@@ -94,10 +95,10 @@ MAI_CleanupAndExit(void)
   MNL_Finalise();
   CLG_Finalise();
   NSR_Finalise();
-  NCR_Finalise();
-  CAM_Finalise();
-  NIO_Finalise();
   SST_Finalise();
+  NCR_Finalise();
+  NIO_Finalise();
+  CAM_Finalise();
   KEY_Finalise();
   RCL_Finalise();
   SRC_Finalise();
@@ -264,7 +265,7 @@ write_lockfile(void)
   if (!out) {
     LOG_FATAL(LOGF_Main, "could not open lockfile %s for writing", pidfile);
   } else {
-    fprintf(out, "%d\n", getpid());
+    fprintf(out, "%d\n", (int)getpid());
     fclose(out);
   }
 }
@@ -274,11 +275,6 @@ write_lockfile(void)
 static void
 go_daemon(void)
 {
-#ifdef WINNT
-
-
-#else
-
   int pid, fd, pipefd[2];
 
   /* Create pipe which will the daemon use to notify the grandparent
@@ -337,8 +333,6 @@ go_daemon(void)
       LOG_SetParentFd(pipefd[1]);
     }
   }
-
-#endif
 }
 
 /* ================================================== */
@@ -349,10 +343,11 @@ int main
   const char *conf_file = DEFAULT_CONF_FILE;
   const char *progname = argv[0];
   char *user = NULL;
+  struct passwd *pw;
   int debug = 0, nofork = 0, address_family = IPADDR_UNSPEC;
   int do_init_rtc = 0, restarted = 0;
   int other_pid;
-  int lock_memory = 0, sched_priority = 0;
+  int scfilter_level = 0, lock_memory = 0, sched_priority = 0;
   int system_log = 1;
   int config_args = 0;
 
@@ -382,6 +377,10 @@ int main
       } else {
         user = *argv;
       }
+    } else if (!strcmp("-F", *argv)) {
+      ++argv, --argc;
+      if (argc == 0 || sscanf(*argv, "%d", &scfilter_level) != 1)
+        LOG_FATAL(LOGF_Main, "Bad syscall filter level");
     } else if (!strcmp("-s", *argv)) {
       do_init_rtc = 1;
     } else if (!strcmp("-v", *argv) || !strcmp("--version",*argv)) {
@@ -472,6 +471,12 @@ int main
   RCL_Initialise();
   KEY_Initialise();
 
+  /* Open privileged ports before dropping root */
+  CAM_Initialise(address_family);
+  NIO_Initialise(address_family);
+  NCR_Initialise();
+  CNF_SetupAccessRestrictions();
+
   /* Command-line switch must have priority */
   if (!sched_priority) {
     sched_priority = CNF_GetSchedPriority();
@@ -487,17 +492,19 @@ int main
   if (!user) {
     user = CNF_GetUser();
   }
-  if (user && strcmp(user, "root")) {
-    SYS_DropRoot(user);
-  }
 
-  LOG_CreateLogFileDir();
+  if ((pw = getpwnam(user)) == NULL)
+    LOG_FATAL(LOGF_Main, "Could not get %s uid/gid", user);
+
+  /* Create all directories before dropping root */
+  CNF_CreateDirs(pw->pw_uid, pw->pw_gid);
+
+  /* Drop root privileges if the user has non-zero uid or gid */
+  if (pw->pw_uid || pw->pw_gid)
+    SYS_DropRoot(pw->pw_uid, pw->pw_gid);
 
   REF_Initialise();
   SST_Initialise();
-  NIO_Initialise(address_family);
-  CAM_Initialise(address_family);
-  NCR_Initialise();
   NSR_Initialise();
   CLG_Initialise();
   MNL_Initialise();
@@ -507,7 +514,12 @@ int main
   /* From now on, it is safe to do finalisation on exit */
   initialised = 1;
 
-  CNF_SetupAccessRestrictions();
+  UTI_SetQuitSignalsHandler(signal_cleanup);
+
+  CAM_OpenUnixSocket();
+
+  if (scfilter_level)
+    SYS_EnableSystemCallFilter(scfilter_level);
 
   if (ref_mode == REF_ModeNormal && CNF_GetInitSources() > 0) {
     ref_mode = REF_ModeInitStepSlew;
@@ -522,13 +534,6 @@ int main
     post_init_rtc_hook(NULL);
   }
 
-  signal(SIGINT, signal_cleanup);
-  signal(SIGTERM, signal_cleanup);
-#if !defined(WINNT)
-  signal(SIGQUIT, signal_cleanup);
-  signal(SIGHUP, signal_cleanup);
-#endif /* WINNT */
-
   /* The program normally runs under control of the main loop in
      the scheduler. */
   SCH_MainLoop();

make_release

@@ -39,16 +39,13 @@ echo $version > version.txt
 
 sed -i -e "s%@@VERSION@@%${version}%" examples/chrony.spec
 
-for m in chrony.1 chronyc.1.in chrony.conf.5.in chronyd.8.in; do
+for m in chronyc.1.in chrony.conf.5.in chronyd.8.in; do
   sed -e "s%@VERSION@%${version}%;s%@MAN_DATE@%${mandate}%" \
     < $m > ${m}_
   mv -f ${m}_ $m
 done
 
-./configure && make chrony.txt || exit 1
-mv chrony.txt chrony.txt_
-make distclean
-mv chrony.txt_ chrony.txt
+./configure && make chrony.txt getdate.c || exit 1
 
 awk '/^[1-9] Installation$/{p=1}
      /^[1-9]\.. Support for line editing/{exit}; p' chrony.txt | \
@@ -59,16 +56,11 @@ if [ $(wc -l < INSTALL) -gt 100 -o $(wc -l < INSTALL) -lt 85 ]; then
   exit 3
 fi
 
-awk '/^[1-9] Frequently asked questions$/{p=1}
-     /^Appendix A GNU General Public License$/{exit}; p' chrony.txt | \
- tail -n +4 | sed 's/^[1-9]\.\([1-9]\)/\1/' | sed 's/^----/--/' | \
- sed 's/^====/==/' > FAQ
-
-if [ $(wc -l < FAQ) -gt 400 -o $(wc -l < FAQ) -lt 200 ]; then
-  echo "FAQ generated incorrectly?"
-  exit 3
-fi
+a2x --lynx -f text doc/faq.adoc || exit 1
+mv doc/faq.text FAQ
+rm -rf doc
 
+make distclean
 rm -f config.h config.log make_release .gitignore
 
 cd ..

mkdirpp.c

@@ -1,135 +0,0 @@
-/*
-  chronyd/chronyc - Programs for keeping computer clocks accurate.
-
- **********************************************************************
- * Copyright (C) Richard P. Curnow  1997-2002
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- * 
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- * 
- **********************************************************************
-
-  =======================================================================
-
-  A function for creating a directory and any parent directories that
-  don't exist.
-
-  */
-
-#include "config.h"
-
-#include "sysincl.h"
-
-#include "memory.h"
-#include "mkdirpp.h"
-
-static int
-do_dir(char *p)
-{
-  int status;
-  struct stat buf;
-
-#if defined(TEST)
-  fprintf(stderr, "do_dir(%s)\n", p);
-#endif
-
-  /* See if directory exists */
-  status = stat(p, &buf);
-
-  if (status < 0) {
-    if (errno == ENOENT) {
-      /* Try to create directory */
-      status = mkdir(p, 0755);
-      return status;
-    } else {
-      return status;
-    }
-  }
-
-  if (!S_ISDIR(buf.st_mode)) {
-    return -1;
-  }
-
-  return 0;
-}
-
-/* ================================================== */
-/* Return 0 if the directory couldn't be created, 1 if it could (or
-   already existed) */
-
-int
-mkdir_and_parents(const char *path)
-{
-  char *p;
-  int len;
-  int i, j, k, last;
-  len = strlen(path);
-
-  p = (char *)Malloc(1 + len);
-
-  i = k = 0;
-  while (1) {
-    p[i++] = path[k++];
-    
-    if (path[k] == '/' || !path[k]) {
-      p[i] = 0;
-
-      if (do_dir(p) < 0) {
-        Free(p);
-        return 0;
-      }
-
-      if (!path[k]) {
-        /* End of the string */
-        break;
-      }
-
-      /* check whether its a trailing / or group of / */
-      last = 1;
-      j = k+1;
-      while (path[j]) {
-        if (path[j] != '/') {
-          k = j - 1; /* Pick up a / into p[] thru the assignment at the top of the loop */
-          last = 0;
-          break;
-        }
-        j++;
-      }
-
-      if (last) {
-        break;
-      }
-    }
-
-    if (!path[k]) break;
-
-  }  
-
-  Free(p);
-  return 1;
-
-}
-
-/* ================================================== */
-
-#if defined(TEST)
-int main(int argc, char **argv) {
-  if (argc > 1) {
-    /* Invert sense of result */
-    return mkdir_and_parents(argv[1]) ? 0 : 1;
-  } else {
-    return 1;
-  }
-}
-#endif
-                                  

mkdirpp.h

@@ -1,31 +0,0 @@
-/* 
-  chronyd/chronyc - Programs for keeping computer clocks accurate.
-
- **********************************************************************
- * Copyright (C) Richard P. Curnow  1997-2002
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- * 
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- * 
- **********************************************************************
-
-  =======================================================================
-
-   */
-
-#ifndef GOT_MKDIRPP_H
-#define GOT_MKDIRPP_H
-
-extern int mkdir_and_parents(const char *path);
-
-#endif

nameserv_async.h

@@ -34,8 +34,7 @@
 typedef void (*DNS_NameResolveHandler)(DNS_Status status, int n_addrs, IPAddr *ip_addrs, void *anything);
 
 /* Request resolving of a name to IP address. The handler will be
-   called when the result is available, but it may be also called
-   directly from this function call. */
+   called when the result is available. */
 extern void DNS_Name2IPAddressAsync(const char *name, DNS_NameResolveHandler handler, void *anything);
 
 #endif

ntp.h

@@ -109,4 +109,9 @@ typedef struct {
 #define NTP_LVM(leap, version, mode) \
   ((((leap) << 6) & 0xc0) | (((version) << 3) & 0x38) | ((mode) & 0x07))
 
+/* Special NTP reference IDs */
+#define NTP_REFID_UNSYNC 0x0UL
+#define NTP_REFID_LOCAL 0x7F7F0101UL /* 127.127.1.1 */
+#define NTP_REFID_SMOOTH 0x7F7F01FFUL /* 127.127.1.255 */
+
 #endif /* GOT_NTP_H */

ntp_core.c

@@ -316,7 +316,7 @@ NCR_Initialise(void)
   do_time_checks();
 
   logfileid = CNF_GetLogMeasurements() ? LOG_FileOpen("measurements",
-      "   Date (UTC) Time     IP Address   L St 123 567 ABCD  LP RP Score Offset     Peer del. Peer disp. Root del.  Root disp.")
+      "   Date (UTC) Time     IP Address   L St 123 567 ABCD  LP RP Score    Offset  Peer del. Peer disp.  Root del. Root disp.")
     : -1;
 
   access_auth_table = ADF_CreateTable();
@@ -789,8 +789,8 @@ transmit_packet(NTP_Mode my_mode, /* The mode this machine wants to be */
 
   /* Get current smoothing offset when sending packet to a client */
   if (SMT_IsEnabled() && (my_mode == MODE_SERVER || my_mode == MODE_BROADCAST)) {
-    smooth_time = 1;
     smooth_offset = SMT_GetOffset(&local_transmit);
+    smooth_time = fabs(smooth_offset) > LCL_GetSysPrecisionAsQuantum();
 
     /* Suppress leap second when smoothing and slew mode are enabled */
     if (REF_GetLeapMode() == REF_LeapModeSlew &&
@@ -801,6 +801,14 @@ transmit_packet(NTP_Mode my_mode, /* The mode this machine wants to be */
     smooth_offset = 0.0;
   }
 
+  if (smooth_time) {
+    our_ref_id = NTP_REFID_SMOOTH;
+    UTI_AddDoubleToTimeval(&our_ref_time, smooth_offset, &our_ref_time);
+    UTI_AddDoubleToTimeval(local_rx, smooth_offset, &local_receive);
+  } else {
+    local_receive = *local_rx;
+  }
+
   if (are_we_synchronised) {
     leap = (int) leap_status;
   } else {
@@ -824,17 +832,10 @@ transmit_packet(NTP_Mode my_mode, /* The mode this machine wants to be */
   message.root_delay = UTI_DoubleToInt32(our_root_delay);
   message.root_dispersion = UTI_DoubleToInt32(our_root_dispersion);
 
-  message.reference_id = htonl((NTP_int32) our_ref_id);
+  message.reference_id = htonl(our_ref_id);
 
   /* Now fill in timestamps */
 
-  if (smooth_time) {
-    UTI_AddDoubleToTimeval(&our_ref_time, smooth_offset, &our_ref_time);
-    UTI_AddDoubleToTimeval(local_rx, smooth_offset, &local_receive);
-  } else {
-    local_receive = *local_rx;
-  }
-
   UTI_TimevalToInt64(&our_ref_time, &message.reference_ts, 0);
 
   /* Originate - this comes from the last packet the source sent us */
@@ -1230,7 +1231,8 @@ receive_packet(NTP_Packet *message, struct timeval *now, double now_err, NCR_Ins
     inst->local_ntp_tx.hi = inst->local_ntp_tx.lo = 0;
 
   if (valid_packet) {
-    precision = LCL_GetSysPrecisionAsQuantum();
+    precision = LCL_GetSysPrecisionAsQuantum() +
+                UTI_Log2ToDouble(message->precision);
 
     SRC_GetFrequencyRange(inst->source, &source_freq_lo, &source_freq_hi);
     

ntp_io.c

@@ -99,10 +99,10 @@ prepare_socket(int family, int port_number, int client_only)
   if (sock_fd < 0) {
     if (!client_only) {
       LOG(LOGS_ERR, LOGF_NtpIO, "Could not open %s NTP socket : %s",
-          family == AF_INET ? "IPv4" : "IPv6", strerror(errno));
+          UTI_SockaddrFamilyToString(family), strerror(errno));
     } else {
       DEBUG_LOG(LOGF_NtpIO, "Could not open %s NTP socket : %s",
-                family == AF_INET ? "IPv4" : "IPv6", strerror(errno));
+                UTI_SockaddrFamilyToString(family), strerror(errno));
     }
     return INVALID_SOCK_FD;
   }
@@ -221,7 +221,7 @@ prepare_socket(int family, int port_number, int client_only)
   /* Bind the socket if a port or address was specified */
   if (my_addr_len > 0 && bind(sock_fd, &my_addr.u, my_addr_len) < 0) {
     LOG(LOGS_ERR, LOGF_NtpIO, "Could not bind %s NTP socket : %s",
-        family == AF_INET ? "IPv4" : "IPv6", strerror(errno));
+        UTI_SockaddrFamilyToString(family), strerror(errno));
     close(sock_fd);
     return INVALID_SOCK_FD;
   }

ntp_sources.c

@@ -49,6 +49,7 @@ typedef struct {
   NTP_Remote_Address *remote_addr; /* The address of this source, non-NULL
                                       means this slot in table is in use */
   NCR_Instance data;            /* Data for the protocol engine for this source */
+  char *name;                   /* Name of the source, may be NULL */
   int pool;                     /* Number of the pool from which was this source
                                    added or INVALID_POOL */
   int tentative;                /* Flag indicating there was no valid response
@@ -85,6 +86,7 @@ struct UnresolvedSource {
 #define RESOLVE_INTERVAL_UNIT 7
 #define MIN_RESOLVE_INTERVAL 2
 #define MAX_RESOLVE_INTERVAL 9
+#define MIN_REPLACEMENT_INTERVAL 8
 
 static struct UnresolvedSource *unresolved_sources = NULL;
 static int resolving_interval = 0;
@@ -92,15 +94,11 @@ static SCH_TimeoutID resolving_id;
 static struct UnresolvedSource *resolving_source = NULL;
 static NSR_SourceResolvingEndHandler resolving_end_handler = NULL;
 
-#define MIN_POOL_RESOLVE_INTERVAL 5
 #define MAX_POOL_SOURCES 16
 #define INVALID_POOL (-1)
 
-/* Pool of sources, the name is expected to resolve to multiple addresses
-   which change over time */
+/* Pool of sources with the same name */
 struct SourcePool {
-  char *name;
-  int port;
   /* Number of sources added from this pool (ignoring tentative sources) */
   int sources;
   /* Maximum number of sources */
@@ -115,6 +113,7 @@ static ARR_Instance pools;
 
 static void resolve_sources(void *arg);
 static void rehash_records(void);
+static void clean_source_record(SourceRecord *record);
 
 static void
 slew_sources(struct timeval *raw,
@@ -162,16 +161,12 @@ NSR_Finalise(void)
   struct UnresolvedSource *us;
   unsigned int i;
 
-  for (i = 0; i < ARR_GetSize(pools); i++)
-    Free(((struct SourcePool *)ARR_GetElement(pools, i))->name);
   ARR_DestroyInstance(pools);
 
   for (i = 0; i < ARR_GetSize(records); i++) {
     record = get_record(i);
-    if (!record->remote_addr)
-      continue;
-    record->remote_addr = NULL;
-    NCR_DestroyInstance(record->data);
+    if (record->remote_addr)
+      clean_source_record(record);
   }
 
   ARR_DestroyInstance(records);
@@ -296,7 +291,7 @@ rehash_records(void)
 
 /* Procedure to add a new source */
 static NSR_Status
-add_source(NTP_Remote_Address *remote_addr, NTP_Source_Type type, SourceParameters *params, int pool)
+add_source(NTP_Remote_Address *remote_addr, char *name, NTP_Source_Type type, SourceParameters *params, int pool)
 {
   SourceRecord *record;
   int slot, found;
@@ -323,6 +318,7 @@ add_source(NTP_Remote_Address *remote_addr, NTP_Source_Type type, SourceParamete
       record = get_record(slot);
       record->data = NCR_GetInstance(remote_addr, type, params);
       record->remote_addr = NCR_GetRemoteAddress(record->data);
+      record->name = name ? Strdup(name) : NULL;
       record->pool = pool;
       record->tentative = pool != INVALID_POOL ? 1 : 0;
 
@@ -373,7 +369,7 @@ process_resolved_name(struct UnresolvedSource *us, IPAddr *ip_addrs, int n_addrs
   int i, added;
 
   for (i = added = 0; i < n_addrs; i++) {
-    DEBUG_LOG(LOGF_NtpSources, "%s resolved to %s", us->name, UTI_IPToString(&ip_addrs[i]));
+    DEBUG_LOG(LOGF_NtpSources, "(%d) %s", i + 1, UTI_IPToString(&ip_addrs[i]));
 
     address.ip_addr = ip_addrs[i];
     address.port = us->port;
@@ -382,7 +378,7 @@ process_resolved_name(struct UnresolvedSource *us, IPAddr *ip_addrs, int n_addrs
       if (replace_source(&us->replace_source, &address) != NSR_AlreadyInUse)
         break;
     } else {
-      if (add_source(&address, us->new_source.type, &us->new_source.params,
+      if (add_source(&address, us->name, us->new_source.type, &us->new_source.params,
                      us->new_source.pool) == NSR_Success)
         added++;
 
@@ -403,6 +399,8 @@ name_resolve_handler(DNS_Status status, int n_addrs, IPAddr *ip_addrs, void *any
 
   assert(us == resolving_source);
 
+  DEBUG_LOG(LOGF_NtpSources, "%s resolved to %d addrs", us->name, n_addrs);
+
   switch (status) {
     case DNS_TryAgain:
       break;
@@ -495,7 +493,7 @@ append_unresolved_source(struct UnresolvedSource *us)
 NSR_Status
 NSR_AddSource(NTP_Remote_Address *remote_addr, NTP_Source_Type type, SourceParameters *params)
 {
-  return add_source(remote_addr, type, params, INVALID_POOL);
+  return add_source(remote_addr, NULL, type, params, INVALID_POOL);
 }
 
 /* ================================================== */
@@ -505,6 +503,15 @@ NSR_AddSourceByName(char *name, int port, int pool, NTP_Source_Type type, Source
 {
   struct UnresolvedSource *us;
   struct SourcePool *sp;
+  NTP_Remote_Address remote_addr;
+
+  /* If the name is an IP address, don't bother with full resolving now
+     or later when trying to replace the source */
+  if (UTI_StringToIP(name, &remote_addr.ip_addr)) {
+    remote_addr.port = port;
+    NSR_AddSource(&remote_addr, type, params);
+    return;
+  }
 
   us = MallocNew(struct UnresolvedSource);
   us->name = Strdup(name);
@@ -518,8 +525,6 @@ NSR_AddSourceByName(char *name, int port, int pool, NTP_Source_Type type, Source
     us->new_source.max_new_sources = 1;
   } else {
     sp = (struct SourcePool *)ARR_GetNewElement(pools);
-    sp->name = Strdup(name);
-    sp->port = port;
     sp->sources = 0;
     sp->max_sources = params->max_sources;
     us->new_source.pool = ARR_GetSize(pools) - 1;
@@ -587,6 +592,8 @@ clean_source_record(SourceRecord *record)
   assert(record->remote_addr);
   record->remote_addr = NULL;
   NCR_DestroyInstance(record->data);
+  if (record->name)
+    Free(record->name);
 
   n_sources--;
 }
@@ -640,15 +647,18 @@ NSR_RemoveAllSources(void)
 /* ================================================== */
 
 static void
-resolve_pool_replacement(struct SourcePool *sp, NTP_Remote_Address *addr)
+resolve_source_replacement(SourceRecord *record)
 {
   struct UnresolvedSource *us;
 
+  DEBUG_LOG(LOGF_NtpSources, "trying to replace %s",
+            UTI_IPToString(&record->remote_addr->ip_addr));
+
   us = MallocNew(struct UnresolvedSource);
-  us->name = Strdup(sp->name);
-  us->port = sp->port;
+  us->name = Strdup(record->name);
+  us->port = record->remote_addr->port;
   us->replacement = 1;
-  us->replace_source = *addr;
+  us->replace_source = *record->remote_addr;
 
   append_unresolved_source(us);
   NSR_ResolveSources();
@@ -662,32 +672,50 @@ NSR_HandleBadSource(IPAddr *address)
   static struct timeval last_replacement;
   struct timeval now;
   NTP_Remote_Address remote_addr;
-  struct SourcePool *pool;
-  int pool_index, slot, found;
+  SourceRecord *record;
+  int slot, found;
   double diff;
 
   remote_addr.ip_addr = *address;
   remote_addr.port = 0;
 
-  /* Only sources from a pool can be replaced */
   find_slot(&remote_addr, &slot, &found);
-  if (!found || (pool_index = get_record(slot)->pool) == INVALID_POOL)
+  if (!found)
     return;
 
-  pool = (struct SourcePool *)ARR_GetElement(pools, pool_index);
+  record = get_record(slot);
 
-  /* Don't resolve the pool name too frequently */
+  /* Only sources with a name can be replaced */
+  if (!record->name)
+    return;
+
+  /* Don't resolve names too frequently */
   SCH_GetLastEventTime(NULL, NULL, &now);
   UTI_DiffTimevalsToDouble(&diff, &now, &last_replacement);
-  if (fabs(diff) < RESOLVE_INTERVAL_UNIT * (1 << MIN_POOL_RESOLVE_INTERVAL)) {
+  if (fabs(diff) < RESOLVE_INTERVAL_UNIT * (1 << MIN_REPLACEMENT_INTERVAL)) {
     DEBUG_LOG(LOGF_NtpSources, "replacement postponed");
     return;
   }
   last_replacement = now;
 
-  DEBUG_LOG(LOGF_NtpSources, "pool replacement for %s", UTI_IPToString(address));
+  resolve_source_replacement(record);
+}
 
-  resolve_pool_replacement(pool, &remote_addr);
+/* ================================================== */
+
+void
+NSR_RefreshAddresses(void)
+{
+  SourceRecord *record;
+  unsigned int i;
+
+  for (i = 0; i < ARR_GetSize(records); i++) {
+    record = get_record(i);
+    if (!record->remote_addr || !record->name)
+      continue;
+
+    resolve_source_replacement(record);
+  }
 }
 
 /* ================================================== */
@@ -741,7 +769,7 @@ NSR_ProcessReceive(NTP_Packet *message, struct timeval *now, double now_err, NTP
       pool->sources++;
 
       DEBUG_LOG(LOGF_NtpSources, "pool %s has %d confirmed sources",
-                pool->name, pool->sources);
+                record->name, pool->sources);
 
       /* If the number of sources reached the configured maximum, remove
          the tentative sources added from this pool */

ntp_sources.h

@@ -80,6 +80,9 @@ extern void NSR_RemoveAllSources(void);
 /* Procedure to try to find a replacement for a bad source */
 extern void NSR_HandleBadSource(IPAddr *address);
 
+/* Procedure to resolve all names again */
+extern void NSR_RefreshAddresses(void);
+
 /* This routine is called by ntp_io when a new packet arrives off the network */
 extern void NSR_ProcessReceive(NTP_Packet *message, struct timeval *now, double now_err, NTP_Remote_Address *remote_addr, NTP_Local_Address *local_addr, int length);
 

pktlength.c

@@ -44,9 +44,8 @@ command_unpadded_length(CMD_Request *r)
     return 0;
   } else {
     switch (type) {
-      
       case REQ_NULL:
-        return offsetof(CMD_Request, data);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_ONLINE:
         return offsetof(CMD_Request, data.online.EOR);
       case REQ_OFFLINE:
@@ -78,11 +77,11 @@ command_unpadded_length(CMD_Request *r)
       case REQ_MANUAL :
         return offsetof(CMD_Request, data.manual.EOR);
       case REQ_N_SOURCES :
-        return offsetof(CMD_Request, data.n_sources.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_SOURCE_DATA :
         return offsetof(CMD_Request, data.source_data.EOR);
       case REQ_REKEY :
-        return offsetof(CMD_Request, data.rekey.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_ALLOW :
         return offsetof(CMD_Request, data.allow_deny.EOR);
       case REQ_ALLOWALL :
@@ -110,21 +109,21 @@ command_unpadded_length(CMD_Request *r)
       case REQ_DEL_SOURCE :
         return offsetof(CMD_Request, data.del_source.EOR);
       case REQ_WRITERTC :
-        return offsetof(CMD_Request, data.writertc.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_DFREQ :
         return offsetof(CMD_Request, data.dfreq.EOR);
       case REQ_DOFFSET :
         return offsetof(CMD_Request, data.doffset.EOR);
       case REQ_TRACKING :
-        return offsetof(CMD_Request, data.tracking.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_SOURCESTATS :
         return offsetof(CMD_Request, data.sourcestats.EOR);
       case REQ_RTCREPORT :
-        return offsetof(CMD_Request, data.rtcreport.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_TRIMRTC :
-        return offsetof(CMD_Request, data.trimrtc.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_CYCLELOGS :
-        return offsetof(CMD_Request, data.cyclelogs.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_SUBNETS_ACCESSED :
       case REQ_CLIENT_ACCESSES:
         /* No longer supported */
@@ -132,21 +131,27 @@ command_unpadded_length(CMD_Request *r)
       case REQ_CLIENT_ACCESSES_BY_INDEX:
         return offsetof(CMD_Request, data.client_accesses_by_index.EOR);
       case REQ_MANUAL_LIST:
-        return offsetof(CMD_Request, data.manual_list.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_MANUAL_DELETE:
         return offsetof(CMD_Request, data.manual_delete.EOR);
       case REQ_MAKESTEP:
-        return offsetof(CMD_Request, data.make_step.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_ACTIVITY:
-        return offsetof(CMD_Request, data.activity.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_RESELECT:
-        return offsetof(CMD_Request, data.reselect.EOR);
+        return offsetof(CMD_Request, data.null.EOR);
       case REQ_RESELECTDISTANCE:
         return offsetof(CMD_Request, data.reselect_distance.EOR);
       case REQ_MODIFY_MINSTRATUM:
         return offsetof(CMD_Request, data.modify_minstratum.EOR);
       case REQ_MODIFY_POLLTARGET:
         return offsetof(CMD_Request, data.modify_polltarget.EOR);
+      case REQ_SMOOTHING:
+        return offsetof(CMD_Request, data.null.EOR);
+      case REQ_SMOOTHTIME:
+        return offsetof(CMD_Request, data.smoothtime.EOR);
+      case REQ_REFRESH:
+        return offsetof(CMD_Request, data.null.EOR);
       default:
         /* If we fall through the switch, it most likely means we've forgotten to implement a new case */
         assert(0);
@@ -228,11 +233,11 @@ PKL_CommandPaddingLength(CMD_Request *r)
     case REQ_MANUAL:
       return PADDING_LENGTH(data.manual.EOR, data.null.EOR);
     case REQ_N_SOURCES:
-      return PADDING_LENGTH(data.n_sources.EOR, data.n_sources.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.n_sources.EOR);
     case REQ_SOURCE_DATA:
       return PADDING_LENGTH(data.source_data.EOR, data.source_data.EOR);
     case REQ_REKEY:
-      return PADDING_LENGTH(data.rekey.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_ALLOW:
       return PADDING_LENGTH(data.allow_deny.EOR, data.null.EOR);
     case REQ_ALLOWALL:
@@ -260,21 +265,21 @@ PKL_CommandPaddingLength(CMD_Request *r)
     case REQ_DEL_SOURCE:
       return PADDING_LENGTH(data.del_source.EOR, data.null.EOR);
     case REQ_WRITERTC:
-      return PADDING_LENGTH(data.writertc.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_DFREQ:
       return PADDING_LENGTH(data.dfreq.EOR, data.null.EOR);
     case REQ_DOFFSET:
       return PADDING_LENGTH(data.doffset.EOR, data.null.EOR);
     case REQ_TRACKING:
-      return PADDING_LENGTH(data.tracking.EOR, data.tracking.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.tracking.EOR);
     case REQ_SOURCESTATS:
       return PADDING_LENGTH(data.sourcestats.EOR, data.sourcestats.EOR);
     case REQ_RTCREPORT:
-      return PADDING_LENGTH(data.rtcreport.EOR, data.rtc.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.rtc.EOR);
     case REQ_TRIMRTC:
-      return PADDING_LENGTH(data.trimrtc.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_CYCLELOGS:
-      return PADDING_LENGTH(data.cyclelogs.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_SUBNETS_ACCESSED:
     case REQ_CLIENT_ACCESSES:
       /* No longer supported */
@@ -282,21 +287,27 @@ PKL_CommandPaddingLength(CMD_Request *r)
     case REQ_CLIENT_ACCESSES_BY_INDEX:
       return PADDING_LENGTH(data.client_accesses_by_index.EOR, data.client_accesses_by_index.EOR);
     case REQ_MANUAL_LIST:
-      return PADDING_LENGTH(data.manual_list.EOR, data.manual_list.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.manual_list.EOR);
     case REQ_MANUAL_DELETE:
       return PADDING_LENGTH(data.manual_delete.EOR, data.null.EOR);
     case REQ_MAKESTEP:
-      return PADDING_LENGTH(data.make_step.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_ACTIVITY:
-      return PADDING_LENGTH(data.activity.EOR, data.activity.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.activity.EOR);
     case REQ_RESELECT:
-      return PADDING_LENGTH(data.reselect.EOR, data.null.EOR);
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     case REQ_RESELECTDISTANCE:
       return PADDING_LENGTH(data.reselect_distance.EOR, data.null.EOR);
     case REQ_MODIFY_MINSTRATUM:
       return PADDING_LENGTH(data.modify_minstratum.EOR, data.null.EOR);
     case REQ_MODIFY_POLLTARGET:
       return PADDING_LENGTH(data.modify_polltarget.EOR, data.null.EOR);
+    case REQ_SMOOTHING:
+      return PADDING_LENGTH(data.null.EOR, data.smoothing.EOR);
+    case REQ_SMOOTHTIME:
+      return PADDING_LENGTH(data.smoothtime.EOR, data.null.EOR);
+    case REQ_REFRESH:
+      return PADDING_LENGTH(data.null.EOR, data.null.EOR);
     default:
       /* If we fall through the switch, it most likely means we've forgotten to implement a new case */
       assert(0);
@@ -360,7 +371,8 @@ PKL_ReplyLength(CMD_Reply *r)
         }
       case RPY_ACTIVITY:
         return offsetof(CMD_Reply, data.activity.EOR);
-        
+      case RPY_SMOOTHING:
+        return offsetof(CMD_Reply, data.smoothing.EOR);
       default:
         assert(0);
     }

refclock.c

@@ -499,15 +499,6 @@ RCL_AddPulse(RCL_Instance instance, struct timeval *pulse_time, double second)
   return 1;
 }
 
-static double
-poll_interval(int poll)
-{
-  if (poll >= 0)
-    return 1 << poll;
-  else
-    return 1.0 / (1 << -poll);
-}
-
 static int
 valid_sample_time(RCL_Instance instance, struct timeval *tv)
 {
@@ -516,7 +507,7 @@ valid_sample_time(RCL_Instance instance, struct timeval *tv)
 
   LCL_ReadRawTime(&raw_time);
   UTI_DiffTimevalsToDouble(&diff, &raw_time, tv);
-  if (diff < 0.0 || diff > poll_interval(instance->poll + 1)) {
+  if (diff < 0.0 || diff > UTI_Log2ToDouble(instance->poll + 1)) {
     DEBUG_LOG(LOGF_Refclock, "%s refclock sample not valid age=%.6f tv=%s",
         UTI_RefidToString(instance->ref_id), diff, UTI_TimevalToString(tv));
     return 0;
@@ -595,7 +586,7 @@ poll_timeout(void *arg)
     }
   }
 
-  inst->timeout_id = SCH_AddTimeoutByDelay(poll_interval(poll), poll_timeout, arg);
+  inst->timeout_id = SCH_AddTimeoutByDelay(UTI_Log2ToDouble(poll), poll_timeout, arg);
 }
 
 static void

reference.c

@@ -120,11 +120,6 @@ static LOG_FileID logfileid;
 
 /* ================================================== */
 
-/* Reference ID supplied when we are locally referenced */
-#define LOCAL_REFERENCE_ID 0x7f7f0101UL
-
-/* ================================================== */
-
 /* Exponential moving averages of absolute clock frequencies
    used as a fallback when synchronisation is lost. */
 
@@ -794,7 +789,7 @@ update_leap_status(NTP_Leap leap, time_t now, int reset)
     }
   }
   
-  if (reset || (leap_sec != our_leap_sec && !REF_IsLeapSecondClose())) {
+  if (leap_sec != our_leap_sec && !REF_IsLeapSecondClose()) {
     our_leap_sec = leap_sec;
 
     switch (leap_mode) {
@@ -810,6 +805,8 @@ update_leap_status(NTP_Leap leap, time_t now, int reset)
         assert(0);
         break;
     }
+  } else if (reset) {
+    set_leap_timeout(now);
   }
 
   our_leap_status = leap;
@@ -1109,12 +1106,10 @@ REF_SetManualReference
  double skew
 )
 {
-  uint32_t manual_refid = 0x4D414E55; /* MANU */
-
   /* We are not synchronised to an external source, as such.  This is
-   only supposed to be used with the local source option, really
-   ... */
-  REF_SetReference(0, LEAP_Unsynchronised, 1, manual_refid, NULL,
+     only supposed to be used with the local source option, really.
+     Log as MANU in the tracking log, packets will have NTP_REFID_LOCAL. */
+  REF_SetReference(0, LEAP_Unsynchronised, 1, 0x4D414E55UL, NULL,
                    ref_time, offset, 0.0, frequency, skew, 0.0, 0.0);
 }
 
@@ -1200,7 +1195,7 @@ REF_GetReferenceParams
     *is_synchronised = 1;
 
     *stratum = local_stratum;
-    *ref_id = LOCAL_REFERENCE_ID;
+    *ref_id = NTP_REFID_LOCAL;
     /* Make the reference time be now less a second - this will
        scarcely affect the client, but will ensure that the transmit
        timestamp cannot come before this (which would cause test 7 to
@@ -1222,7 +1217,7 @@ REF_GetReferenceParams
 
     *leap_status = LEAP_Unsynchronised;
     *stratum = NTP_MAX_STRATUM;
-    *ref_id = 0;
+    *ref_id = NTP_REFID_UNSYNC;
     ref_time->tv_sec = ref_time->tv_usec = 0;
     /* These values seem to be standard for a client, and
        any peer or client of ours will ignore them anyway because
@@ -1336,7 +1331,7 @@ REF_GetTrackingReport(RPT_TrackingReport *rep)
   LCL_GetOffsetCorrection(&now_raw, &correction, NULL);
   UTI_AddDoubleToTimeval(&now_raw, correction, &now_cooked);
 
-  rep->ref_id = 0;
+  rep->ref_id = NTP_REFID_UNSYNC;
   rep->ip_addr.family = IPADDR_UNSPEC;
   rep->stratum = 0;
   rep->leap_status = our_leap_status;
@@ -1368,7 +1363,7 @@ REF_GetTrackingReport(RPT_TrackingReport *rep)
 
   } else if (enable_local_stratum) {
 
-    rep->ref_id = LOCAL_REFERENCE_ID;
+    rep->ref_id = NTP_REFID_LOCAL;
     rep->ip_addr.family = IPADDR_UNSPEC;
     rep->stratum = local_stratum;
     rep->ref_time = now_cooked;

reports.h

@@ -112,4 +112,14 @@ typedef struct {
   int unresolved;
 } RPT_ActivityReport;
 
+typedef struct {
+  int active;
+  int leap_only;
+  double offset;
+  double freq_ppm;
+  double wander_ppm;
+  double last_update_ago;
+  double remaining_time;
+} RPT_SmoothingReport;
+
 #endif /* GOT_REPORTS_H */

rtc_linux.c

@@ -1051,6 +1051,8 @@ RTC_Linux_TimePreInit(void)
       LOG(LOGS_WARN, LOGF_RtcLinux, "Could not convert RTC reading to seconds since 1/1/1970");
       return 0;
     }
+  } else {
+    return 0;
   }
 
   return 1;

sched.c

@@ -330,6 +330,10 @@ SCH_AddTimeoutByDelay(double delay, SCH_TimeoutHandler handler, SCH_ArbitraryArg
 
   LCL_ReadRawTime(&now);
   UTI_AddDoubleToTimeval(&now, delay, &then);
+  if (UTI_CompareTimevals(&now, &then) > 0) {
+    LOG_FATAL(LOGF_Scheduler, "Timeout overflow");
+  }
+
   return SCH_AddTimeout(&then, handler, arg);
 
 }

smooth.c

@@ -77,6 +77,10 @@ static struct stage stages[NUM_STAGES];
 /* Enabled/disabled smoothing */
 static int enabled;
 
+/* Enabled/disabled mode where only leap seconds are smoothed out and normal
+   offset/frequency changes are ignored */
+static int leap_only_mode;
+
 /* Maximum skew/max_wander ratio to start updating offset and frequency */
 #define UNLOCK_SKEW_WANDER_RATIO 10000
 
@@ -93,15 +97,17 @@ static struct timeval last_update;
 
 
 static void
-get_offset_freq(struct timeval *now, double *offset, double *freq)
+get_smoothing(struct timeval *now, double *poffset, double *pfreq,
+              double *pwander)
 {
-  double elapsed, length;
+  double elapsed, length, offset, freq, wander;
   int i;
 
   UTI_DiffTimevalsToDouble(&elapsed, now, &last_update);
 
-  *offset = smooth_offset;
-  *freq = smooth_freq;
+  offset = smooth_offset;
+  freq = smooth_freq;
+  wander = 0.0;
 
   for (i = 0; i < NUM_STAGES; i++) {
     if (elapsed <= 0.0)
@@ -111,13 +117,21 @@ get_offset_freq(struct timeval *now, double *offset, double *freq)
     if (length >= elapsed)
       length = elapsed;
 
-    *offset -= length * (2.0 * *freq + stages[i].wander * length) / 2.0;
-    *freq += stages[i].wander * length;
+    wander = stages[i].wander;
+    offset -= length * (2.0 * freq + wander * length) / 2.0;
+    freq += wander * length;
     elapsed -= length;
   }
 
-  if (elapsed > 0.0)
-    *offset -= elapsed * *freq;
+  if (elapsed > 0.0) {
+    wander = 0.0;
+    offset -= elapsed * freq;
+  }
+
+  *poffset = offset;
+  *pfreq = freq;
+  if (pwander)
+    *pwander = wander;
 }
 
 static void
@@ -185,14 +199,12 @@ update_smoothing(struct timeval *now, double offset, double freq)
 {
   /* Don't accept offset/frequency until the clock has stabilized */
   if (locked) {
-    if (REF_GetSkew() / max_wander < UNLOCK_SKEW_WANDER_RATIO) {
-      LOG(LOGS_INFO, LOGF_Smooth, "Time smoothing activated");
-      locked = 0;
-    }
+    if (REF_GetSkew() / max_wander < UNLOCK_SKEW_WANDER_RATIO || leap_only_mode)
+      SMT_Activate(now);
     return;
   }
 
-  get_offset_freq(now, &smooth_offset, &smooth_freq);
+  get_smoothing(now, &smooth_offset, &smooth_freq, NULL);
   smooth_offset += offset;
   smooth_freq = (smooth_freq - freq) / (1.0 - freq);
   last_update = *now;
@@ -208,15 +220,19 @@ handle_slew(struct timeval *raw, struct timeval *cooked, double dfreq,
 {
   double delta;
 
-  if (change_type == LCL_ChangeAdjust)
-    update_smoothing(cooked, doffset, dfreq);
+  if (change_type == LCL_ChangeAdjust) {
+    if (leap_only_mode)
+      update_smoothing(cooked, 0.0, 0.0);
+    else
+      update_smoothing(cooked, doffset, dfreq);
+  }
 
   UTI_AdjustTimeval(&last_update, cooked, &last_update, &delta, dfreq, doffset);
 }
 
 void SMT_Initialise(void)
 {
-  CNF_GetSmooth(&max_freq, &max_wander);
+  CNF_GetSmooth(&max_freq, &max_wander, &leap_only_mode);
   if (max_freq <= 0.0 || max_wander <= 0.0) {
       enabled = 0;
       return;
@@ -249,19 +265,78 @@ SMT_GetOffset(struct timeval *now)
   if (!enabled)
     return 0.0;
   
-  get_offset_freq(now, &offset, &freq);
+  get_smoothing(now, &offset, &freq, NULL);
 
   return offset;
 }
 
+void
+SMT_Activate(struct timeval *now)
+{
+  if (!enabled || !locked)
+    return;
+
+  LOG(LOGS_INFO, LOGF_Smooth, "Time smoothing activated%s", leap_only_mode ?
+      " (leap seconds only)" : "");
+  locked = 0;
+  last_update = *now;
+}
+
 void
 SMT_Reset(struct timeval *now)
 {
+  int i;
+
   if (!enabled)
     return;
 
-  locked = 1;
   smooth_offset = 0.0;
   smooth_freq = 0.0;
   last_update = *now;
+
+  for (i = 0; i < NUM_STAGES; i++)
+    stages[i].wander = stages[i].length = 0.0;
+}
+
+void
+SMT_Leap(struct timeval *now, int leap)
+{
+  /* When the leap-only mode is disabled, the leap second will be accumulated
+     in handle_slew() as a normal offset */
+  if (!enabled || !leap_only_mode)
+    return;
+
+  update_smoothing(now, leap, 0.0);
+}
+
+int
+SMT_GetSmoothingReport(RPT_SmoothingReport *report, struct timeval *now)
+{
+  double length, elapsed;
+  int i;
+
+  if (!enabled)
+    return 0;
+
+  report->active = !locked;
+  report->leap_only = leap_only_mode;
+
+  get_smoothing(now, &report->offset, &report->freq_ppm, &report->wander_ppm);
+
+  /* Convert to ppm and negate (positive values mean faster/speeding up) */
+  report->freq_ppm *= -1.0e6;
+  report->wander_ppm *= -1.0e6;
+
+  UTI_DiffTimevalsToDouble(&elapsed, now, &last_update);
+  if (!locked && elapsed >= 0.0) {
+    for (i = 0, length = 0.0; i < NUM_STAGES; i++)
+      length += stages[i].length;
+    report->last_update_ago = elapsed;
+    report->remaining_time = elapsed < length ? length - elapsed : 0.0;
+  } else {
+    report->last_update_ago = 0.0;
+    report->remaining_time = 0.0;
+  }
+
+  return 1;
 }

smooth.h

@@ -27,6 +27,8 @@
 #ifndef GOT_SMOOTH_H
 #define GOT_SMOOTH_H
 
+#include "reports.h"
+
 extern void SMT_Initialise(void);
 
 extern void SMT_Finalise(void);
@@ -35,6 +37,12 @@ extern int SMT_IsEnabled(void);
 
 extern double SMT_GetOffset(struct timeval *now);
 
+extern void SMT_Activate(struct timeval *now);
+
 extern void SMT_Reset(struct timeval *now);
 
+extern void SMT_Leap(struct timeval *now, int leap);
+
+extern int SMT_GetSmoothingReport(RPT_SmoothingReport *report, struct timeval *now);
+
 #endif

sources.c

@@ -44,7 +44,6 @@
 #include "logging.h"
 #include "reports.h"
 #include "nameserv.h"
-#include "mkdirpp.h"
 #include "sched.h"
 #include "regress.h"
 
@@ -71,6 +70,7 @@ typedef enum {
   SRC_OK,               /* OK so far, not a final status! */
   SRC_UNSELECTABLE,     /* Has noselect option set */
   SRC_BAD_STATS,        /* Doesn't have valid stats data */
+  SRC_BAD_DISTANCE,     /* Has root distance longer than allowed maximum */
   SRC_WAITS_STATS,      /* Others have bad stats, selection postponed */
   SRC_STALE,            /* Has older samples than others */
   SRC_FALSETICKER,      /* Doesn't agree with others */
@@ -156,6 +156,7 @@ static int selected_source_index; /* Which source index is currently
 /* Number of updates needed to reset the distant status */
 #define DISTANT_PENALTY 32
 
+static double max_distance;
 static double reselect_distance;
 static double stratum_weight;
 static double combine_limit;
@@ -180,6 +181,7 @@ void SRC_Initialise(void) {
   n_sources = 0;
   max_n_sources = 0;
   selected_source_index = INVALID_SOURCE;
+  max_distance = CNF_GetMaxDistance();
   reselect_distance = CNF_GetReselectDistance();
   stratum_weight = CNF_GetStratumWeight();
   combine_limit = CNF_GetCombineLimit();
@@ -654,6 +656,12 @@ SRC_SelectSource(SRC_Instance updated_inst)
       continue;
     }
 
+    /* Require the root distance to be below the allowed maximum */
+    if (si->root_distance > max_distance) {
+      sources[i]->status = SRC_BAD_DISTANCE;
+      continue;
+    }
+
     sources[i]->status = SRC_OK; /* For now */
 
     if (sources[i]->reachability && max_reach_sample_ago < first_sample_ago)
@@ -807,43 +815,6 @@ SRC_SelectSource(SRC_Instance updated_inst)
     }
   }
 
-#if 0
-  /* We now have a list of indices for the sources which pass the
-     false-ticker test.  Now go on to reject those whose variance is
-     greater than the minimum distance of any other */
-
-  /* Find minimum distance */
-  index = sel_sources[0];
-  min_distance = sources[index]->sel_info.root_distance;
-  for (i = 1; i < n_sel_sources; i++) {
-    index = sel_sources[i];
-    distance = sources[index]->sel_info.root_distance;
-    if (distance < min_distance) {
-      min_distance = distance;
-    }
-  }
-
-  /* Now go through and prune any NTP sources that have excessive
-     variance */
-  for (i = 0; i < n_sel_sources; i++) {
-    index = sel_sources[i];
-    if (sources[index]->type == SRC_NTP &&
-        sqrt(sources[index]->sel_info.variance) > min_distance) {
-      sel_sources[i] = INVALID_SOURCE;
-      sources[index]->status = SRC_JITTERY;
-    }
-  }
-
-  /* Now crunch the list and mark all sources as selectable */
-  for (i = j = 0; i < n_sel_sources; i++) {
-    index = sel_sources[i];
-    if (index == INVALID_SOURCE)
-      continue;
-    sel_sources[j++] = index;
-  }
-  n_sel_sources = j;
-#endif
-
   if (n_sel_sources == 0 || n_sel_sources < CNF_GetMinSources()) {
     if (selected_source_index != INVALID_SOURCE) {
       log_selection_message("Can't synchronise: %s selectable sources",
@@ -872,16 +843,18 @@ SRC_SelectSource(SRC_Instance updated_inst)
 
   /* If there are any sources with prefer option, reduce the list again
      only to the preferred sources */
-  for (i = j = 0; i < n_sel_sources; i++) {
+  for (i = 0; i < n_sel_sources; i++) {
     if (sources[sel_sources[i]]->sel_option == SRC_SelectPrefer)
-      sel_sources[j++] = sel_sources[i];
+      break;
   }
-
-  if (j > 0) {
-    for (i = 0; i < n_sel_sources; i++) {
+  if (i < n_sel_sources) {
+    for (i = j = 0; i < n_sel_sources; i++) {
       if (sources[sel_sources[i]]->sel_option != SRC_SelectPrefer)
         sources[sel_sources[i]]->status = SRC_NONPREFERRED;
+      else
+        sel_sources[j++] = sel_sources[i];
     }
+    assert(j > 0);
     n_sel_sources = j;
     sel_prefer = 1;
   } else {
@@ -1128,25 +1101,23 @@ SRC_DumpSources(void)
   direc_len = strlen(direc);
   file_len = direc_len + 24;
   filename = MallocArray(char, file_len); /* a bit of slack */
-  if (mkdir_and_parents(direc)) {
-    for (i=0; i<n_sources; i++) {
-      a = (sources[i]->ref_id) >> 24;
-      b = ((sources[i]->ref_id) >> 16) & 0xff;
-      c = ((sources[i]->ref_id) >> 8) & 0xff;
-      d = ((sources[i]->ref_id)) & 0xff;
-      
-      snprintf(filename, file_len-1, "%s/%d.%d.%d.%d.dat", direc, a, b, c, d);
-      out = fopen(filename, "w");
-      if (!out) {
-        LOG(LOGS_WARN, LOGF_Sources, "Could not open dump file %s", filename);
-      } else {
-        SST_SaveToFile(sources[i]->stats, out);
-        fclose(out);
-      }
+
+  for (i = 0; i < n_sources; i++) {
+    a = (sources[i]->ref_id) >> 24;
+    b = ((sources[i]->ref_id) >> 16) & 0xff;
+    c = ((sources[i]->ref_id) >> 8) & 0xff;
+    d = ((sources[i]->ref_id)) & 0xff;
+
+    snprintf(filename, file_len - 1, "%s/%d.%d.%d.%d.dat", direc, a, b, c, d);
+    out = fopen(filename, "w");
+    if (!out) {
+      LOG(LOGS_WARN, LOGF_Sources, "Could not open dump file %s", filename);
+    } else {
+      SST_SaveToFile(sources[i]->stats, out);
+      fclose(out);
     }
-  } else {
-    LOG(LOGS_ERR, LOGF_Sources, "Could not create directory %s", direc);
   }
+
   Free(filename);
 }
 
@@ -1254,6 +1225,7 @@ SRC_ReportSource(int index, RPT_SourceReport *report, struct timeval *now)
     switch (src->status) {
       case SRC_UNSELECTABLE:
       case SRC_BAD_STATS:
+      case SRC_BAD_DISTANCE:
       case SRC_STALE:
       case SRC_WAITS_STATS:
         report->state = RPT_UNREACH;

strerror.c

@@ -1,38 +0,0 @@
-/*
-  chronyd/chronyc - Programs for keeping computer clocks accurate.
-
- **********************************************************************
- * Copyright (C) Richard P. Curnow  1997-2002
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- * 
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- * 
- **********************************************************************
-
-  =======================================================================
-
-  Replacement strerror function for systems that don't have it
-  */
-
-#include "config.h"
-
-#ifdef SUNOS
-
-#include <errno.h>
-extern char *sys_errlist[];
-
-char *strerror(int n) {
-  return sys_errlist[n];
-}
-
-#endif /* SUNOS */

stubs.c

@@ -2,7 +2,7 @@
   chronyd/chronyc - Programs for keeping computer clocks accurate.
 
  **********************************************************************
- * Copyright (C) Miroslav Lichvar  2014
+ * Copyright (C) Miroslav Lichvar  2014-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -32,12 +32,14 @@
 #include "keys.h"
 #include "logging.h"
 #include "manual.h"
+#include "memory.h"
 #include "nameserv.h"
 #include "nameserv_async.h"
 #include "ntp_core.h"
 #include "ntp_io.h"
 #include "ntp_sources.h"
 #include "refclock.h"
+#include "sched.h"
 
 #ifndef FEAT_ASYNCDNS
 
@@ -45,20 +47,43 @@
 
 /* This is a blocking implementation used when asynchronous resolving is not available */
 
-void
-DNS_Name2IPAddressAsync(const char *name, DNS_NameResolveHandler handler, void *anything)
+struct DNS_Async_Instance {
+  const char *name;
+  DNS_NameResolveHandler handler;
+  void *arg;
+};
+
+static void
+resolve_name(void *anything)
 {
+  struct DNS_Async_Instance *inst;
   IPAddr addrs[MAX_ADDRESSES];
   DNS_Status status;
   int i;
 
-  status = DNS_Name2IPAddress(name, addrs, MAX_ADDRESSES);
+  inst = (struct DNS_Async_Instance *)anything;
+  status = DNS_Name2IPAddress(inst->name, addrs, MAX_ADDRESSES);
 
   for (i = 0; status == DNS_Success && i < MAX_ADDRESSES &&
-              addrs[i].family != IPADDR_UNSPEC; i++)
+       addrs[i].family != IPADDR_UNSPEC; i++)
     ;
 
-  (handler)(status, i, addrs, anything);
+  (inst->handler)(status, i, addrs, inst->arg);
+
+  Free(inst);
+}
+
+void
+DNS_Name2IPAddressAsync(const char *name, DNS_NameResolveHandler handler, void *anything)
+{
+  struct DNS_Async_Instance *inst;
+
+  inst = MallocNew(struct DNS_Async_Instance);
+  inst->name = name;
+  inst->handler = handler;
+  inst->arg = anything;
+
+  SCH_AddTimeoutByDelay(0.0, resolve_name, inst);
 }
 
 #endif /* !FEAT_ASYNCDNS */
@@ -75,6 +100,11 @@ CAM_Finalise(void)
 {
 }
 
+void
+CAM_OpenUnixSocket(void)
+{
+}
+
 int
 CAM_AddAccessRestriction(IPAddr *ip_addr, int subnet_bits, int allow, int all)
 {
@@ -169,6 +199,11 @@ NSR_HandleBadSource(IPAddr *address)
 {
 }
 
+void
+NSR_RefreshAddresses(void)
+{
+}
+
 void
 NSR_SetSourceResolvingEndHandler(NSR_SourceResolvingEndHandler handler)
 {

sys.c

@@ -27,23 +27,21 @@
 
 #include "config.h"
 
+#include "sysincl.h"
+
 #include "sys.h"
 #include "logging.h"
 
-#if defined (LINUX)
+#if defined(LINUX)
 #include "sys_linux.h"
-#endif
-
-#if defined (SOLARIS)
+#elif defined(SOLARIS)
 #include "sys_solaris.h"
-#endif
-
-#if defined (SUNOS)
+#elif defined(SUNOS)
 #include "sys_sunos.h"
-#endif
-
-#if defined (__NetBSD__)
+#elif defined(NETBSD) || defined(FREEBSD)
 #include "sys_netbsd.h"
+#elif defined(MACOSX)
+#include "sys_macosx.h"
 #endif
 
 /* ================================================== */
@@ -51,23 +49,19 @@
 void
 SYS_Initialise(void)
 {
-
 #if defined(LINUX)
   SYS_Linux_Initialise();
-#endif
-
-#if defined(SOLARIS)
+#elif defined(SOLARIS)
   SYS_Solaris_Initialise();
-#endif
-
-#if defined(SUNOS)
+#elif defined(SUNOS)
   SYS_SunOS_Initialise();
-#endif
-
-#if defined(__NetBSD__)
+#elif defined(NETBSD) || defined(FREEBSD)
   SYS_NetBSD_Initialise();
+#elif defined(MACOSX)
+  SYS_MacOSX_Initialise();
+#else
+#error Unknown system
 #endif
-
 }
 
 /* ================================================== */
@@ -75,30 +69,29 @@ SYS_Initialise(void)
 void
 SYS_Finalise(void)
 {
-  
 #if defined(LINUX)
   SYS_Linux_Finalise();
-#endif
-
-#if defined(SOLARIS)
+#elif defined(SOLARIS)
   SYS_Solaris_Finalise();
-#endif
-
-#if defined(SUNOS)
+#elif defined(SUNOS)
   SYS_SunOS_Finalise();
-#endif
-
-#if defined(__NetBSD__)
+#elif defined(NETBSD) || defined(FREEBSD)
   SYS_NetBSD_Finalise();
+#elif defined(MACOSX)
+  SYS_MacOSX_Finalise();
+#else
+#error Unknown system
 #endif
 }
 
 /* ================================================== */
 
-void SYS_DropRoot(char *user)
+void SYS_DropRoot(uid_t uid, gid_t gid)
 {
 #if defined(LINUX) && defined (FEAT_PRIVDROP)
-  SYS_Linux_DropRoot(user);
+  SYS_Linux_DropRoot(uid, gid);
+#elif defined(NETBSD) && defined(FEAT_PRIVDROP)
+  SYS_NetBSD_DropRoot(uid, gid);
 #else
   LOG_FATAL(LOGF_Sys, "dropping root privileges not supported");
 #endif
@@ -106,10 +99,23 @@ void SYS_DropRoot(char *user)
 
 /* ================================================== */
 
+void SYS_EnableSystemCallFilter(int level)
+{
+#if defined(LINUX) && defined(FEAT_SCFILTER)
+  SYS_Linux_EnableSystemCallFilter(level);
+#else
+  LOG_FATAL(LOGF_Sys, "system call filter not supported");
+#endif
+}
+
+/* ================================================== */
+
 void SYS_SetScheduler(int SchedPriority)
 {
 #if defined(LINUX) && defined(HAVE_SCHED_SETSCHEDULER)
   SYS_Linux_SetScheduler(SchedPriority);
+#elif defined(MACOSX)
+  SYS_MacOSX_SetScheduler(SchedPriority);
 #else
   LOG_FATAL(LOGF_Sys, "scheduler priority setting not supported");
 #endif

sys.h

@@ -35,8 +35,12 @@ extern void SYS_Initialise(void);
 /* Called at the end of the run to do final clean-up */
 extern void SYS_Finalise(void);
 
-/* Drop root privileges to the specified user */
-extern void SYS_DropRoot(char *user);
+/* Drop root privileges to the specified user and group */
+extern void SYS_DropRoot(uid_t uid, gid_t gid);
+
+/* Enable a system call filter to allow only system calls
+   which chronyd normally needs after initialization */
+extern void SYS_EnableSystemCallFilter(int level);
 
 extern void SYS_SetScheduler(int SchedPriority);
 extern void SYS_LockMemory(void);

sys_generic.c

@@ -2,7 +2,7 @@
   chronyd/chronyc - Programs for keeping computer clocks accurate.
 
  **********************************************************************
- * Copyright (C) Miroslav Lichvar  2014
+ * Copyright (C) Miroslav Lichvar  2014-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -43,6 +43,8 @@
 static lcl_ReadFrequencyDriver drv_read_freq;
 static lcl_SetFrequencyDriver drv_set_freq;
 static lcl_SetSyncStatusDriver drv_set_sync_status;
+static lcl_AccrueOffsetDriver drv_accrue_offset;
+static lcl_OffsetCorrectionDriver drv_get_offset_correction;
 
 /* Current frequency as requested by the local module (in ppm) */
 static double base_freq;
@@ -85,6 +87,16 @@ static double correction_rate;
    real frequency of the clock */
 static double slew_error;
 
+/* Minimum offset that the system driver can slew faster than the maximum
+   frequency offset that it allows to be set directly */
+static double fastslew_min_offset;
+
+/* Maximum slew rate of the system driver */
+static double fastslew_max_rate;
+
+/* Flag indicating that the system driver is currently slewing */
+static int fastslew_active;
+
 /* ================================================== */
 
 static void handle_end_of_slew(void *anything);
@@ -109,6 +121,38 @@ handle_step(struct timeval *raw, struct timeval *cooked, double dfreq,
 
 /* ================================================== */
 
+static void
+start_fastslew(void)
+{
+  if (!drv_accrue_offset)
+    return;
+
+  drv_accrue_offset(offset_register, 0.0);
+
+  DEBUG_LOG(LOGF_SysGeneric, "fastslew offset=%e", offset_register);
+
+  offset_register = 0.0;
+  fastslew_active = 1;
+}
+
+/* ================================================== */
+
+static void
+stop_fastslew(struct timeval *now)
+{
+  double corr;
+
+  if (!drv_get_offset_correction || !fastslew_active)
+    return;
+
+  /* Cancel the remaining offset */
+  drv_get_offset_correction(now, &corr, NULL);
+  drv_accrue_offset(corr, 0.0);
+  offset_register -= corr;
+}
+
+/* ================================================== */
+
 static double
 clamp_freq(double freq)
 {
@@ -138,6 +182,8 @@ update_slew(void)
   UTI_DiffTimevalsToDouble(&duration, &now, &slew_start);
   offset_register -= slew_freq * duration;
 
+  stop_fastslew(&now);
+
   /* Estimate how long should the next slew take */
   if (fabs(offset_register) < MIN_OFFSET_CORRECTION) {
     duration = MAX_SLEW_TIMEOUT;
@@ -155,6 +201,14 @@ update_slew(void)
   else if (corr_freq > max_corr_freq)
     corr_freq = max_corr_freq;
 
+  /* Let the system driver perform the slew if the requested frequency
+     offset is too large for the frequency driver */
+  if (drv_accrue_offset && fabs(corr_freq) >= fastslew_max_rate &&
+      fabs(offset_register) > fastslew_min_offset) {
+    start_fastslew();
+    corr_freq = 0.0;
+  }
+
   /* Get the new real frequency and clamp it */
   total_freq = clamp_freq(base_freq + corr_freq * (1.0e6 - base_freq));
 
@@ -175,8 +229,8 @@ update_slew(void)
 
   /* Compute the duration of the slew and clamp it.  If the slewing frequency
      is zero or has wrong sign (e.g. due to rounding in the frequency driver or
-     when base_freq is larger than max_freq), use maximum timeout and try again
-     on the next update. */
+     when base_freq is larger than max_freq, or fast slew is active), use the
+     maximum timeout and try again on the next update. */
   if (fabs(offset_register) < MIN_OFFSET_CORRECTION ||
       offset_register * slew_freq <= 0.0) {
     duration = MAX_SLEW_TIMEOUT;
@@ -246,13 +300,25 @@ static void
 offset_convert(struct timeval *raw,
                double *corr, double *err)
 {
-  double duration;
+  double duration, fastslew_corr, fastslew_err;
 
   UTI_DiffTimevalsToDouble(&duration, raw, &slew_start);
 
-  *corr = slew_freq * duration - offset_register;
-  if (err)
-    *err = fabs(duration) <= max_freq_change_delay ? slew_error : 0.0;
+  if (drv_get_offset_correction && fastslew_active) {
+    drv_get_offset_correction(raw, &fastslew_corr, &fastslew_err);
+    if (fastslew_corr == 0.0 && fastslew_err == 0.0)
+      fastslew_active = 0;
+  } else {
+    fastslew_corr = fastslew_err = 0.0;
+  }
+
+  *corr = slew_freq * duration + fastslew_corr - offset_register;
+
+  if (err) {
+    *err = fastslew_err;
+    if (fabs(duration) <= max_freq_change_delay)
+      *err += slew_error;
+  }
 }
 
 /* ================================================== */
@@ -303,6 +369,9 @@ SYS_Generic_CompleteFreqDriver(double max_set_freq_ppm, double max_set_freq_dela
                                lcl_ReadFrequencyDriver sys_read_freq,
                                lcl_SetFrequencyDriver sys_set_freq,
                                lcl_ApplyStepOffsetDriver sys_apply_step_offset,
+                               double min_fastslew_offset, double max_fastslew_rate,
+                               lcl_AccrueOffsetDriver sys_accrue_offset,
+                               lcl_OffsetCorrectionDriver sys_get_offset_correction,
                                lcl_SetLeapDriver sys_set_leap,
                                lcl_SetSyncStatusDriver sys_set_sync_status)
 {
@@ -310,6 +379,8 @@ SYS_Generic_CompleteFreqDriver(double max_set_freq_ppm, double max_set_freq_dela
   max_freq_change_delay = max_set_freq_delay * (1.0 + max_freq / 1.0e6);
   drv_read_freq = sys_read_freq;
   drv_set_freq = sys_set_freq;
+  drv_accrue_offset = sys_accrue_offset;
+  drv_get_offset_correction = sys_get_offset_correction;
   drv_set_sync_status = sys_set_sync_status;
 
   base_freq = (*drv_read_freq)();
@@ -318,6 +389,10 @@ SYS_Generic_CompleteFreqDriver(double max_set_freq_ppm, double max_set_freq_dela
 
   max_corr_freq = CNF_GetMaxSlewRate() / 1.0e6;
 
+  fastslew_min_offset = min_fastslew_offset;
+  fastslew_max_rate = max_fastslew_rate / 1.0e6;
+  fastslew_active = 0;
+
   lcl_RegisterSystemDrivers(read_frequency, set_frequency,
                             accrue_offset, sys_apply_step_offset ?
                               sys_apply_step_offset : apply_step_offset,
@@ -331,6 +406,8 @@ SYS_Generic_CompleteFreqDriver(double max_set_freq_ppm, double max_set_freq_dela
 void
 SYS_Generic_Finalise(void)
 {
+  struct timeval now;
+
   /* Must *NOT* leave a slew running - clock could drift way off
      if the daemon is not restarted */
   if (slew_timer_running) {
@@ -339,6 +416,9 @@ SYS_Generic_Finalise(void)
   }
 
   (*drv_set_freq)(clamp_freq(base_freq));
+
+  LCL_ReadRawTime(&now);
+  stop_fastslew(&now);
 }
 
 /* ================================================== */

sys_generic.h

@@ -35,6 +35,9 @@ extern void SYS_Generic_CompleteFreqDriver(double max_set_freq_ppm, double max_s
                                            lcl_ReadFrequencyDriver sys_read_freq,
                                            lcl_SetFrequencyDriver sys_set_freq,
                                            lcl_ApplyStepOffsetDriver sys_apply_step_offset,
+                                           double min_fastslew_offset, double max_fastslew_rate,
+                                           lcl_AccrueOffsetDriver sys_accrue_offset,
+                                           lcl_OffsetCorrectionDriver sys_get_offset_correction,
                                            lcl_SetLeapDriver sys_set_leap,
                                            lcl_SetSyncStatusDriver sys_set_sync_status);
 

sys_linux.c

@@ -4,7 +4,7 @@
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
  * Copyright (C) John G. Hasler  2009
- * Copyright (C) Miroslav Lichvar  2009-2012, 2014
+ * Copyright (C) Miroslav Lichvar  2009-2012, 2014-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -35,31 +35,48 @@
 
 #if defined(HAVE_SCHED_SETSCHEDULER)
 #  include <sched.h>
-int SchedPriority = 0;
 #endif
 
 #if defined(HAVE_MLOCKALL)
 #  include <sys/mman.h>
 #include <sys/resource.h>
-int LockAll = 0;
 #endif
 
 #ifdef FEAT_PRIVDROP
-#include <sys/types.h>
-#include <pwd.h>
 #include <sys/prctl.h>
 #include <sys/capability.h>
 #include <grp.h>
 #endif
 
-#include "sys_generic.h"
+#ifdef FEAT_SCFILTER
+#include <sys/prctl.h>
+#include <seccomp.h>
+#ifdef FEAT_PHC
+#include <linux/ptp_clock.h>
+#endif
+#ifdef FEAT_PPS
+#include <linux/pps.h>
+#endif
+#ifdef FEAT_RTC
+#include <linux/rtc.h>
+#endif
+#endif
+
 #include "sys_linux.h"
+#include "sys_timex.h"
 #include "conf.h"
 #include "logging.h"
-#include "wrap_adjtimex.h"
 
-/* The threshold for adjtimex maxerror when the kernel sets the UNSYNC flag */
-#define UNSYNC_MAXERROR 16.0
+/* Frequency scale to convert from ppm to the timex freq */
+#define FREQ_SCALE (double)(1 << 16)
+
+/* Definitions used if missed in the system headers */
+#ifndef ADJ_SETOFFSET
+#define ADJ_SETOFFSET           0x0100  /* add 'time' to current time */
+#endif
+#ifndef ADJ_NANO
+#define ADJ_NANO                0x2000  /* select nanosecond resolution */
+#endif
 
 /* This is the uncompensated system tick value */
 static int nominal_tick;
@@ -103,11 +120,19 @@ our_round(double x)
 static int
 apply_step_offset(double offset)
 {
-  if (TMX_ApplyStepOffset(-offset) < 0) {
-    DEBUG_LOG(LOGF_SysLinux, "adjtimex() failed");
-    return 0;
+  struct timex txc;
+
+  txc.modes = ADJ_SETOFFSET | ADJ_NANO;
+  txc.time.tv_sec = -offset;
+  txc.time.tv_usec = 1.0e9 * (-offset - txc.time.tv_sec);
+  if (txc.time.tv_usec < 0) {
+    txc.time.tv_sec--;
+    txc.time.tv_usec += 1000000000;
   }
 
+  if (SYS_Timex_Adjust(&txc, 1) < 0)
+    return 0;
+
   return 1;
 }
 
@@ -121,6 +146,7 @@ apply_step_offset(double offset)
 static double
 set_frequency(double freq_ppm)
 {
+  struct timex txc;
   long required_tick;
   double required_freq;
   int required_delta_tick;
@@ -144,14 +170,15 @@ set_frequency(double freq_ppm)
   required_freq = -(freq_ppm - dhz * required_delta_tick);
   required_tick = nominal_tick - required_delta_tick;
 
-  if (TMX_SetFrequency(&required_freq, required_tick) < 0) {
-    LOG_FATAL(LOGF_SysLinux, "adjtimex failed for set_frequency, freq_ppm=%10.4e required_freq=%10.4e required_tick=%ld",
-        freq_ppm, required_freq, required_tick);
-  }
+  txc.modes = ADJ_TICK | ADJ_FREQUENCY;
+  txc.freq = required_freq * FREQ_SCALE;
+  txc.tick = required_tick;
+
+  SYS_Timex_Adjust(&txc, 0);
 
   current_delta_tick = required_delta_tick;
 
-  return dhz * current_delta_tick - required_freq;
+  return dhz * current_delta_tick - txc.freq / FREQ_SCALE;
 }
 
 /* ================================================== */
@@ -160,61 +187,15 @@ set_frequency(double freq_ppm)
 static double
 read_frequency(void)
 {
-  long tick;
-  double freq;
+  struct timex txc;
 
-  if (TMX_GetFrequency(&freq, &tick) < 0) {
-    LOG_FATAL(LOGF_SysLinux, "adjtimex() failed");
-  }
+  txc.modes = 0;
 
-  current_delta_tick = nominal_tick - tick;
-  
-  return dhz * current_delta_tick - freq;
-}
+  SYS_Timex_Adjust(&txc, 0);
 
-/* ================================================== */
+  current_delta_tick = nominal_tick - txc.tick;
 
-static void
-set_leap(int leap)
-{
-  int current_leap;
-
-  if (TMX_GetLeap(&current_leap) < 0) {
-    LOG_FATAL(LOGF_SysLinux, "adjtimex() failed in set_leap");
-  }
-
-  if (current_leap == leap)
-    return;
-
-  if (TMX_SetLeap(leap) < 0) {
-    LOG_FATAL(LOGF_SysLinux, "adjtimex() failed in set_leap");
-  }
-
-  LOG(LOGS_INFO, LOGF_SysLinux, "System clock status set to %s leap second",
-     leap ? (leap > 0 ? "insert" : "delete") : "not insert/delete");
-}
-
-/* ================================================== */
-
-static void
-set_sync_status(int synchronised, double est_error, double max_error)
-{
-  if (synchronised) {
-    if (est_error > UNSYNC_MAXERROR)
-      est_error = UNSYNC_MAXERROR;
-    if (max_error >= UNSYNC_MAXERROR) {
-      max_error = UNSYNC_MAXERROR;
-      synchronised = 0;
-    }
-  } else {
-    est_error = max_error = UNSYNC_MAXERROR;
-  }
-
-  /* Clear the UNSYNC flag only if rtcsync is enabled */
-  if (!CNF_GetRtcSync())
-    synchronised = 0;
-
-  TMX_SetSync(synchronised, est_error, max_error);
+  return dhz * current_delta_tick - txc.freq / FREQ_SCALE;
 }
 
 /* ================================================== */
@@ -225,10 +206,16 @@ set_sync_status(int synchronised, double est_error, double max_error)
  * a +/- 10% movement of tick away from the nominal value 1e6/USER_HZ. */
 
 static int
-guess_hz(int tick)
+guess_hz(void)
 {
-  int i, tick_lo, tick_hi, ihz;
+  struct timex txc;
+  int i, tick, tick_lo, tick_hi, ihz;
   double tick_nominal;
+
+  txc.modes = 0;
+  SYS_Timex_Adjust(&txc, 0);
+  tick = txc.tick;
+
   /* Pick off the hz=100 case first */
   if (tick >= 9000 && tick <= 11000) {
     return 100;
@@ -246,6 +233,8 @@ guess_hz(int tick)
   }
 
   /* oh dear.  doomed. */
+  LOG_FATAL(LOGF_SysLinux, "Can't determine hz from tick %d", tick);
+
   return 0;
 }
 
@@ -287,21 +276,12 @@ static void
 get_version_specific_details(void)
 {
   int major, minor, patch;
-  long tick;
-  double freq;
   struct utsname uts;
   
   hz = get_hz();
 
-  if (!hz) {
-    if (TMX_GetFrequency(&freq, &tick) < 0)
-      LOG_FATAL(LOGF_SysLinux, "adjtimex() failed");
-
-    hz = guess_hz(tick);
-
-    if (!hz)
-      LOG_FATAL(LOGF_SysLinux, "Can't determine hz from tick %ld", tick);
-  }
+  if (!hz)
+    hz = guess_hz();
 
   dhz = (double) hz;
   nominal_tick = (1000000L + (hz/2))/hz; /* Mirror declaration in kernel */
@@ -344,6 +324,48 @@ get_version_specific_details(void)
       hz, nominal_tick, max_tick_bias);
 }
 
+/* ================================================== */
+
+static void
+reset_adjtime_offset(void)
+{
+  struct timex txc;
+
+  /* Reset adjtime() offset */
+  txc.modes = ADJ_OFFSET_SINGLESHOT;
+  txc.offset = 0;
+
+  SYS_Timex_Adjust(&txc, 0);
+}
+
+/* ================================================== */
+
+static int
+test_step_offset(void)
+{
+  struct timex txc;
+
+  /* Zero maxerror and check it's reset to a maximum after ADJ_SETOFFSET.
+     This seems to be the only way how to verify that the kernel really
+     supports the ADJ_SETOFFSET mode as it doesn't return an error on unknown
+     mode. */
+
+  txc.modes = MOD_MAXERROR;
+  txc.maxerror = 0;
+
+  if (SYS_Timex_Adjust(&txc, 1) < 0 || txc.maxerror != 0)
+    return 0;
+
+  txc.modes = ADJ_SETOFFSET | ADJ_NANO;
+  txc.time.tv_sec = 0;
+  txc.time.tv_usec = 0;
+
+  if (SYS_Timex_Adjust(&txc, 1) < 0 || txc.maxerror < 100000)
+    return 0;
+
+  return 1;
+}
+
 /* ================================================== */
 /* Initialisation code for this module */
 
@@ -352,20 +374,18 @@ SYS_Linux_Initialise(void)
 {
   get_version_specific_details();
 
-  if (TMX_ResetOffset() < 0) {
-    LOG_FATAL(LOGF_SysLinux, "adjtimex() failed");
-  }
+  reset_adjtime_offset();
 
-  if (have_setoffset && TMX_TestStepOffset() < 0) {
+  if (have_setoffset && !test_step_offset()) {
     LOG(LOGS_INFO, LOGF_SysLinux, "adjtimex() doesn't support ADJ_SETOFFSET");
     have_setoffset = 0;
   }
 
-  SYS_Generic_CompleteFreqDriver(1.0e6 * max_tick_bias / nominal_tick,
-                                 1.0 / tick_update_hz,
-                                 read_frequency, set_frequency,
-                                 have_setoffset ? apply_step_offset : NULL,
-                                 set_leap, set_sync_status);
+  SYS_Timex_InitialiseWithFunctions(1.0e6 * max_tick_bias / nominal_tick,
+                                    1.0 / tick_update_hz,
+                                    read_frequency, set_frequency,
+                                    have_setoffset ? apply_step_offset : NULL,
+                                    0.0, 0.0, NULL, NULL);
 }
 
 /* ================================================== */
@@ -374,25 +394,17 @@ SYS_Linux_Initialise(void)
 void
 SYS_Linux_Finalise(void)
 {
-  SYS_Generic_Finalise();
+  SYS_Timex_Finalise();
 }
 
 /* ================================================== */
 
 #ifdef FEAT_PRIVDROP
 void
-SYS_Linux_DropRoot(char *user)
+SYS_Linux_DropRoot(uid_t uid, gid_t gid)
 {
-  struct passwd *pw;
   cap_t cap;
 
-  if (user == NULL)
-    return;
-
-  if ((pw = getpwnam(user)) == NULL) {
-    LOG_FATAL(LOGF_SysLinux, "getpwnam(%s) failed", user);
-  }
-
   if (prctl(PR_SET_KEEPCAPS, 1)) {
     LOG_FATAL(LOGF_SysLinux, "prctl() failed");
   }
@@ -401,12 +413,12 @@ SYS_Linux_DropRoot(char *user)
     LOG_FATAL(LOGF_SysLinux, "setgroups() failed");
   }
 
-  if (setgid(pw->pw_gid)) {
-    LOG_FATAL(LOGF_SysLinux, "setgid(%d) failed", pw->pw_gid);
+  if (setgid(gid)) {
+    LOG_FATAL(LOGF_SysLinux, "setgid(%d) failed", gid);
   }
 
-  if (setuid(pw->pw_uid)) {
-    LOG_FATAL(LOGF_SysLinux, "setuid(%d) failed", pw->pw_uid);
+  if (setuid(uid)) {
+    LOG_FATAL(LOGF_SysLinux, "setuid(%d) failed", uid);
   }
 
   if ((cap = cap_from_text("cap_net_bind_service,cap_sys_time=ep")) == NULL) {
@@ -419,7 +431,146 @@ SYS_Linux_DropRoot(char *user)
 
   cap_free(cap);
 
-  DEBUG_LOG(LOGF_SysLinux, "Privileges dropped to user %s", user);
+  DEBUG_LOG(LOGF_SysLinux, "Root dropped to uid %d gid %d", uid, gid);
+}
+#endif
+
+/* ================================================== */
+
+#ifdef FEAT_SCFILTER
+static
+void check_seccomp_applicability(void)
+{
+  int mail_enabled;
+  double mail_threshold;
+  char *mail_user;
+
+  CNF_GetMailOnChange(&mail_enabled, &mail_threshold, &mail_user);
+  if (mail_enabled)
+    LOG_FATAL(LOGF_SysLinux, "mailonchange directive cannot be used with -F enabled");
+}
+
+/* ================================================== */
+
+void
+SYS_Linux_EnableSystemCallFilter(int level)
+{
+  const int syscalls[] = {
+    /* Clock */
+    SCMP_SYS(adjtimex), SCMP_SYS(gettimeofday), SCMP_SYS(settimeofday),
+    SCMP_SYS(time),
+    /* Process */
+    SCMP_SYS(clone), SCMP_SYS(exit), SCMP_SYS(exit_group),
+    SCMP_SYS(rt_sigreturn), SCMP_SYS(sigreturn),
+    /* Memory */
+    SCMP_SYS(brk), SCMP_SYS(madvise), SCMP_SYS(mmap), SCMP_SYS(mmap2),
+    SCMP_SYS(mprotect), SCMP_SYS(munmap), SCMP_SYS(shmdt),
+    /* Filesystem */
+    SCMP_SYS(chmod), SCMP_SYS(chown), SCMP_SYS(chown32), SCMP_SYS(fstat),
+    SCMP_SYS(fstat64), SCMP_SYS(lseek), SCMP_SYS(rename), SCMP_SYS(stat),
+    SCMP_SYS(stat64), SCMP_SYS(unlink),
+    /* Socket */
+    SCMP_SYS(bind), SCMP_SYS(connect), SCMP_SYS(getsockname),
+    SCMP_SYS(recvfrom), SCMP_SYS(recvmsg), SCMP_SYS(sendmmsg),
+    SCMP_SYS(sendmsg), SCMP_SYS(sendto),
+    /* TODO: check socketcall arguments */
+    SCMP_SYS(socketcall),
+    /* General I/O */
+    SCMP_SYS(_newselect), SCMP_SYS(close), SCMP_SYS(open), SCMP_SYS(pipe),
+    SCMP_SYS(poll), SCMP_SYS(read), SCMP_SYS(futex), SCMP_SYS(select),
+    SCMP_SYS(set_robust_list), SCMP_SYS(write),
+    /* Miscellaneous */
+    SCMP_SYS(uname),
+  };
+
+  const int socket_domains[] = {
+    AF_NETLINK, AF_UNIX, AF_INET,
+#ifdef FEAT_IPV6
+    AF_INET6,
+#endif
+  };
+
+  const static int socket_options[][2] = {
+    { SOL_IP, IP_PKTINFO }, { SOL_IP, IP_FREEBIND },
+#ifdef FEAT_IPV6
+    { SOL_IPV6, IPV6_V6ONLY }, { SOL_IPV6, IPV6_RECVPKTINFO },
+#endif
+    { SOL_SOCKET, SO_BROADCAST }, { SOL_SOCKET, SO_REUSEADDR },
+    { SOL_SOCKET, SO_TIMESTAMP },
+  };
+
+  const static int fcntls[] = { F_GETFD, F_SETFD };
+
+  const static unsigned long ioctls[] = {
+    FIONREAD,
+#ifdef FEAT_PPS
+    PTP_SYS_OFFSET,
+#endif
+#ifdef FEAT_PPS
+    PPS_FETCH,
+#endif
+#ifdef FEAT_RTC
+    RTC_RD_TIME, RTC_SET_TIME, RTC_UIE_ON, RTC_UIE_OFF,
+#endif
+  };
+
+  scmp_filter_ctx *ctx;
+  int i;
+
+  /* Check if the chronyd configuration is supported */
+  check_seccomp_applicability();
+
+  ctx = seccomp_init(level > 0 ? SCMP_ACT_KILL : SCMP_ACT_TRAP);
+  if (ctx == NULL)
+      LOG_FATAL(LOGF_SysLinux, "Failed to initialize seccomp");
+
+  /* Add system calls that are always allowed */
+  for (i = 0; i < (sizeof (syscalls) / sizeof (*syscalls)); i++) {
+    if (seccomp_rule_add(ctx, SCMP_ACT_ALLOW, syscalls[i], 0) < 0)
+      goto add_failed;
+  }
+
+  /* Allow sockets to be created only in selected domains */
+  for (i = 0; i < sizeof (socket_domains) / sizeof (*socket_domains); i++) {
+    if (seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(socket), 1,
+                         SCMP_A0(SCMP_CMP_EQ, socket_domains[i])) < 0)
+      goto add_failed;
+  }
+
+  /* Allow setting only selected sockets options */
+  for (i = 0; i < sizeof (socket_options) / sizeof (*socket_options); i++) {
+    if (seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(setsockopt), 3,
+                         SCMP_A1(SCMP_CMP_EQ, socket_options[i][0]),
+                         SCMP_A2(SCMP_CMP_EQ, socket_options[i][1]),
+                         SCMP_A4(SCMP_CMP_LE, sizeof (int))) < 0)
+      goto add_failed;
+  }
+
+  /* Allow only selected fcntl calls */
+  for (i = 0; i < sizeof (fcntls) / sizeof (*fcntls); i++) {
+    if (seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(fcntl), 1,
+                         SCMP_A1(SCMP_CMP_EQ, fcntls[i])) < 0 ||
+        seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(fcntl64), 1,
+                         SCMP_A1(SCMP_CMP_EQ, fcntls[i])) < 0)
+      goto add_failed;
+  }
+
+  /* Allow only selected ioctls */
+  for (i = 0; i < sizeof (ioctls) / sizeof (*ioctls); i++) {
+    if (seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(ioctl), 1,
+                         SCMP_A1(SCMP_CMP_EQ, ioctls[i])) < 0)
+      goto add_failed;
+  }
+
+  if (seccomp_load(ctx) < 0)
+      LOG(LOGS_INFO, LOGF_SysLinux, "Failed to load seccomp rules");
+
+  LOG(LOGS_INFO, LOGF_SysLinux, "Loaded seccomp filter");
+  seccomp_release(ctx);
+  return;
+
+add_failed:
+  LOG_FATAL(LOGF_SysLinux, "Failed to add seccomp rules");
 }
 #endif
 

sys_linux.h

@@ -31,7 +31,9 @@ extern void SYS_Linux_Initialise(void);
 
 extern void SYS_Linux_Finalise(void);
 
-extern void SYS_Linux_DropRoot(char *user);
+extern void SYS_Linux_DropRoot(uid_t uid, gid_t gid);
+
+extern void SYS_Linux_EnableSystemCallFilter(int level);
 
 extern void SYS_Linux_MemLockAll(int LockAll);
 

sys_macosx.c

@@ -2,46 +2,55 @@
   chronyd/chronyc - Programs for keeping computer clocks accurate.
 
  **********************************************************************
- * Copyright (C) Richard P. Curnow  1997-2003
- * 
+ * Copyright (C) Richard P. Curnow  1997-2001
+ * Copyright (C) J. Hannken-Illjes  2001
+ * Copyright (C) Bryan Christianson 2015
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
- * 
+ *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License along
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- * 
+ *
  **********************************************************************
 
   =======================================================================
 
-  Driver file for the SunOS 4.1.x operating system.
+  Driver file for the MacOS X operating system.
+
   */
 
 #include "config.h"
 
-#ifdef SUNOS
+#ifdef MACOSX
+
+#include <sys/sysctl.h>
+#include <sys/time.h>
 
-#include <kvm.h>
-#include <fcntl.h>
 #include <nlist.h>
+#include <fcntl.h>
 #include <assert.h>
 #include <sys/time.h>
 
 #include <stdio.h>
 #include <signal.h>
 
-#include "sys_sunos.h"
+#include <mach/mach.h>
+#include <mach/mach_time.h>
+#include <pthread.h>
+
+#include "sys_macosx.h"
 #include "localp.h"
+#include "sched.h"
 #include "logging.h"
 #include "util.h"
-#include "sched.h"
 
 /* ================================================== */
 
@@ -65,16 +74,27 @@ static double current_freq;
 
 static double adjustment_requested;
 
-/* Eventually, this needs to be a user-defined parameter - e.g. user
-   might want 5 to get much finer resolution like xntpd.  We stick
-   with a reasonable number so that slewing can work.
+/* Interval in seconds between adjustments to cancel systematic drift */
 
-   This value has to be a factor of 1 million, otherwise the noddy
-   method we use for rounding an adjustment to the nearest multiple of
-   this value won't work!!
+#define DRIFT_REMOVAL_INTERVAL (4.0)
+#define DRIFT_REMOVAL_INTERVAL_MIN (0.5)
 
-   */
-static unsigned long our_tickadj = 100;
+/* If current_drift_removal_interval / drift_removal_interval exceeds this
+   ratio, then restart the drift removal timer */
+
+#define DRIFT_REMOVAL_RESTART_RATIO (8.0)
+
+static double drift_removal_interval;
+static double current_drift_removal_interval;
+static struct timeval Tdrift;
+
+/* weighting applied to error in calculating drift_removal_interval */
+#define ERROR_WEIGHT (0.5)
+
+/* minimum resolution of current_frequency */
+#define FREQUENCY_RES (1.0e-9)
+
+#define NANOS_PER_MSEC (1000000ULL)
 
 /* ================================================== */
 
@@ -86,20 +106,19 @@ clock_initialise(void)
   offset_register = 0.0;
   adjustment_requested = 0.0;
   current_freq = 0.0;
+  drift_removal_interval = DRIFT_REMOVAL_INTERVAL;
+  current_drift_removal_interval = DRIFT_REMOVAL_INTERVAL;
 
   if (gettimeofday(&T0, NULL) < 0) {
-    LOG_FATAL(LOGF_SysSunOS, "gettimeofday() failed");
+    LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
   }
+  Tdrift = T0;
 
   newadj.tv_sec = 0;
   newadj.tv_usec = 0;
 
   if (adjtime(&newadj, &oldadj) < 0) {
-    LOG_FATAL(LOGF_SysSunOS, "adjtime() failed");
-  }
-
-  if (adjtime(&newadj, &oldadj) < 0) {
-    LOG_FATAL(LOGF_SysSunOS, "adjtime() failed");
+    LOG_FATAL(LOGF_SysMacOSX, "adjtime() failed");
   }
 }
 
@@ -118,56 +137,47 @@ start_adjust(void)
 {
   struct timeval newadj, oldadj;
   struct timeval T1;
-  double elapsed, accrued_error;
+  double elapsed, accrued_error, predicted_error, drift_removal_elapsed;
   double adjust_required;
-  struct timeval exact_newadj;
   double rounding_error;
   double old_adjust_remaining;
-  long remainder, multiplier;
 
   /* Determine the amount of error built up since the last adjustment */
   if (gettimeofday(&T1, NULL) < 0) {
-    LOG_FATAL(LOGF_SysSunOS, "gettimeofday() failed");
+    LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
   }
 
   UTI_DiffTimevalsToDouble(&elapsed, &T1, &T0);
   accrued_error = elapsed * current_freq;
-  
-  adjust_required = - (accrued_error + offset_register);
 
-  UTI_DoubleToTimeval(adjust_required, &exact_newadj);
+  UTI_DiffTimevalsToDouble(&drift_removal_elapsed, &T1, &Tdrift);
 
-  /* At this point, we need to round the required adjustment to the
-     closest multiple of _tickadj --- because SunOS can't process
-     other adjustments exactly and will silently discard the residual.
-     Obviously such behaviour can't be tolerated for us. */
+  /* To allow for the clock being stepped either forward or backwards, clamp
+     the elapsed time to bounds [ 0.0, current_drift_removal_interval ] */
+  drift_removal_elapsed = MIN(MAX(0.0, drift_removal_elapsed), current_drift_removal_interval);
 
-  newadj = exact_newadj;
-  remainder = newadj.tv_usec % our_tickadj;
-  multiplier = newadj.tv_usec / our_tickadj;
-  if (remainder >= (our_tickadj >> 1)) {
-    newadj.tv_usec = (multiplier + 1) * our_tickadj;
-  } else {
-    newadj.tv_usec = multiplier * our_tickadj;
-  }
+  predicted_error = (current_drift_removal_interval - drift_removal_elapsed) / 2.0 * current_freq;
 
-  UTI_NormaliseTimeval(&newadj);
-  
-  /* Want to *add* rounding error back onto offset register.  Note
-     that the exact adjustment was the offset register *negated* */
-  UTI_DiffTimevalsToDouble(&rounding_error, &newadj, &exact_newadj);
+  DEBUG_LOG(LOGF_SysMacOSX, "drift_removal_elapsed: %.3f current_drift_removal_interval: %.3f predicted_error: %.3f",
+                            1.0e6 * drift_removal_elapsed,
+                            1.0e6 * current_drift_removal_interval,
+                            1.0e6 * predicted_error);
+
+  adjust_required = - (accrued_error + offset_register + predicted_error);
+
+  UTI_DoubleToTimeval(adjust_required, &newadj);
+  UTI_TimevalToDouble(&newadj, &adjustment_requested);
+  rounding_error = adjust_required - adjustment_requested;
 
   if (adjtime(&newadj, &oldadj) < 0) {
-    LOG_FATAL(LOGF_SysSunOS, "adjtime() failed");
+    LOG_FATAL(LOGF_SysMacOSX, "adjtime() failed");
   }
 
   UTI_TimevalToDouble(&oldadj, &old_adjust_remaining);
 
-  offset_register = rounding_error - old_adjust_remaining;
+  offset_register = rounding_error - old_adjust_remaining - predicted_error;
 
   T0 = T1;
-  UTI_TimevalToDouble(&newadj, &adjustment_requested);
-
 }
 
 /* ================================================== */
@@ -178,20 +188,19 @@ stop_adjust(void)
   struct timeval T1;
   struct timeval zeroadj, remadj;
   double adjustment_remaining, adjustment_achieved;
-  double gap;
   double elapsed, elapsed_plus_adjust;
 
   zeroadj.tv_sec = 0;
   zeroadj.tv_usec = 0;
 
   if (adjtime(&zeroadj, &remadj) < 0) {
-    LOG_FATAL(LOGF_SysSunOS, "adjtime() failed");
+    LOG_FATAL(LOGF_SysMacOSX, "adjtime() failed");
   }
 
   if (gettimeofday(&T1, NULL) < 0) {
-    LOG_FATAL(LOGF_SysSunOS, "gettimeofday() failed");
+    LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
   }
-  
+
   UTI_DiffTimevalsToDouble(&elapsed, &T1, &T0);
   UTI_TimevalToDouble(&remadj, &adjustment_remaining);
 
@@ -202,7 +211,6 @@ stop_adjust(void)
 
   adjustment_requested = 0.0;
   T0 = T1;
-
 }
 
 /* ================================================== */
@@ -227,16 +235,17 @@ static int
 apply_step_offset(double offset)
 {
   struct timeval old_time, new_time, T1;
-  
+
   stop_adjust();
+
   if (gettimeofday(&old_time, NULL) < 0) {
-    LOG_FATAL(LOGF_SysSunOS, "gettimeofday() failed");
+    LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
   }
 
   UTI_AddDoubleToTimeval(&old_time, -offset, &new_time);
 
   if (settimeofday(&new_time, NULL) < 0) {
-    DEBUG_LOG(LOGF_SysSunOS, "settimeofday() failed");
+    DEBUG_LOG(LOGF_SysMacOSX, "settimeofday() failed");
     return 0;
   }
 
@@ -283,136 +292,143 @@ get_offset_correction(struct timeval *raw,
 
 /* ================================================== */
 
-static void
-immediate_step(void)
-{
-}
-
-/* ================================================== */
-
-/* Interval in seconds between adjustments to cancel systematic drift */
-#define DRIFT_REMOVAL_INTERVAL (4.0)
+/* Cancel systematic drift */
 
 static int drift_removal_running = 0;
 static SCH_TimeoutID drift_removal_id;
 
 /* ================================================== */
 /* This is the timer callback routine which is called periodically to
-   invoke a time adjustment to take out the machine's drift.
-   Otherwise, times reported through this software (e.g. by running
-   ntpdate from another machine) show the machine being correct (since
-   they correct for drift build-up), but any program on this machine
-   that reads the system time will be given an erroneous value, the
-   degree of error depending on how long it is since
-   get_offset_correction was last called. */
+ invoke a time adjustment to take out the machine's drift.
+ Otherwise, times reported through this software (e.g. by running
+ ntpdate from another machine) show the machine being correct (since
+ they correct for drift build-up), but any program on this machine
+ that reads the system time will be given an erroneous value, the
+ degree of error depending on how long it is since
+ get_offset_correction was last called. */
 
 static void
 drift_removal_timeout(SCH_ArbitraryArgument not_used)
 {
+
   stop_adjust();
+
+  if (gettimeofday(&Tdrift, NULL) < 0) {
+    LOG_FATAL(LOGF_SysMacOSX, "gettimeofday() failed");
+  }
+
+  current_drift_removal_interval = drift_removal_interval;
+
   start_adjust();
-  drift_removal_id = SCH_AddTimeoutByDelay(DRIFT_REMOVAL_INTERVAL, drift_removal_timeout, NULL);
+
+  drift_removal_id = SCH_AddTimeoutByDelay(drift_removal_interval, drift_removal_timeout, NULL);
 }
 
 /* ================================================== */
 
+/* use est_error to calculate the drift_removal_interval */
+
 static void
-setup_kernel(unsigned long on_off)
+set_sync_status(int synchronised, double est_error, double max_error)
 {
-  static struct nlist nl[] = {
-    {"_dosynctodr"},
-    {"_tick"},
-    {"_tickadj"},
-    {NULL}
-  };
+  double interval;
 
-  kvm_t *kt;
-  unsigned long read_back;
-  unsigned long our_tick = 10000;
-  unsigned long default_tickadj = 625;
+  if (!synchronised) {
+    drift_removal_interval = MAX(drift_removal_interval, DRIFT_REMOVAL_INTERVAL);
+  } else {
+    interval = ERROR_WEIGHT * est_error / (fabs(current_freq) + FREQUENCY_RES);
+    drift_removal_interval = MAX(interval, DRIFT_REMOVAL_INTERVAL_MIN);
 
-  assert(on_off == 1 || on_off == 0);
-
-  kt = kvm_open(NULL, NULL, NULL, O_RDWR, NULL);
-  if (!kt) {
-    LOG(LOGS_ERR, LOGF_SysSunOS, "Cannot open kvm");
-    return;
+    DEBUG_LOG(LOGF_SysMacOSX, "est_error: %.3f current_freq: %.3f est drift_removal_interval: %.3f act drift_removal_interval: %.3f",
+                est_error * 1.0e6, current_freq * 1.0e6, interval, drift_removal_interval);
   }
 
-  if (kvm_nlist(kt, nl) < 0) {
-    LOG(LOGS_ERR, LOGF_SysSunOS, "Cannot read kernel symbols");
-    kvm_close(kt);
-    return;
+  if (current_drift_removal_interval / drift_removal_interval > DRIFT_REMOVAL_RESTART_RATIO) {
+    /* recover from a large est_error by resetting the timer */
+    SCH_ArbitraryArgument unused;
+    SCH_RemoveTimeout(drift_removal_id);
+    unused = NULL;
+    drift_removal_timeout(unused);
   }
+}
 
-  if (kvm_write(kt, nl[0].n_value, (char *)(&on_off), sizeof(unsigned long)) < 0) {
-    LOG(LOGS_ERR, LOGF_SysSunOS, "Cannot write to _dosynctodr");
-    kvm_close(kt);
-    return;
+/* ================================================== */
+/*
+  Give chronyd real time priority so that time critical calculations
+  are not pre-empted by the kernel.
+*/
+
+static int
+set_realtime(void)
+{
+  /* https://developer.apple.com/library/ios/technotes/tn2169/_index.html */
+
+  mach_timebase_info_data_t timebase_info;
+  double clock2abs;
+  thread_time_constraint_policy_data_t policy;
+  int kr;
+
+  mach_timebase_info(&timebase_info);
+  clock2abs = ((double)timebase_info.denom / (double)timebase_info.numer) * NANOS_PER_MSEC;
+
+  policy.period = 0;
+  policy.computation = (uint32_t)(5 * clock2abs); /* 5 ms of work */
+  policy.constraint = (uint32_t)(10 * clock2abs);
+  policy.preemptible = 0;
+
+  kr = thread_policy_set(
+          pthread_mach_thread_np(pthread_self()),
+          THREAD_TIME_CONSTRAINT_POLICY,
+          (thread_policy_t)&policy,
+          THREAD_TIME_CONSTRAINT_POLICY_COUNT);
+
+  if (kr != KERN_SUCCESS) {
+    LOG(LOGS_WARN, LOGF_SysMacOSX, "Cannot set real-time priority: %d", kr);
+    return -1;
   }
-
-  if (kvm_write(kt, nl[1].n_value, (char *)(&our_tick), sizeof(unsigned long)) < 0) {
-    LOG(LOGS_ERR, LOGF_SysSunOS, "Cannot write to _tick");
-    kvm_close(kt);
-    return;
-  }
-
-  if (kvm_write(kt, nl[2].n_value,
-                (char *)(on_off ? &default_tickadj : &our_tickadj),
-                sizeof(unsigned long)) < 0) {
-    LOG(LOGS_ERR, LOGF_SysSunOS, "Cannot write to _tickadj");
-    kvm_close(kt);
-    return;
-  }
-
-  kvm_close(kt);
+  return 0;
 }
 
 /* ================================================== */
 
 void
-SYS_SunOS_Initialise(void)
+SYS_MacOSX_SetScheduler(int SchedPriority)
 {
+  if (SchedPriority) {
+    set_realtime();
+  }
+}
 
-  /* Need to do KVM stuff to turn off dosynctodr. */
+/* ================================================== */
 
+void
+SYS_MacOSX_Initialise(void)
+{
   clock_initialise();
 
-  lcl_RegisterSystemDrivers(read_frequency, set_frequency, 
+  lcl_RegisterSystemDrivers(read_frequency, set_frequency,
                             accrue_offset, apply_step_offset,
                             get_offset_correction,
                             NULL /* set_leap */,
-                            NULL /* set_sync_status */);
+                            set_sync_status);
 
-  /* Turn off the kernel switch that keeps the system clock in step
-     with the non-volatile clock */
-  setup_kernel(0);
 
-  drift_removal_id = SCH_AddTimeoutByDelay(DRIFT_REMOVAL_INTERVAL, drift_removal_timeout, NULL);
+  drift_removal_id = SCH_AddTimeoutByDelay(drift_removal_interval, drift_removal_timeout, NULL);
   drift_removal_running = 1;
-
 }
 
 /* ================================================== */
 
 void
-SYS_SunOS_Finalise(void)
+SYS_MacOSX_Finalise(void)
 {
-
   if (drift_removal_running) {
     SCH_RemoveTimeout(drift_removal_id);
   }
 
-  /* Turn dosynctodr back on?? */
-
   clock_finalise();
-
-  /* When exiting, we want to return the machine to its 'autonomous'
-     tracking mode */
-  setup_kernel(1);
 }
 
 /* ================================================== */
 
-
-#endif /* SUNOS */
+#endif

sys_macosx.h

@@ -2,33 +2,36 @@
   chronyd/chronyc - Programs for keeping computer clocks accurate.
 
  **********************************************************************
- * Copyright (C) Richard P. Curnow  1997-2002
- * 
+ * Copyright (C) Richard P. Curnow  1997-2001
+ * Copyright (C) J. Hannken-Illjes  2001
+ * Copyright (C) Bryan Christianson 2015
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
- * 
+ *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License along
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- * 
+ *
  **********************************************************************
 
   =======================================================================
 
-  Header file for Solaris driver
+  Header file for MacOS X driver
+
   */
 
-#ifndef GOT_SYS_SUNOS_H
-#define GOT_SYS_SUNOS_H
+#ifndef GOT_SYS_MACOSX_H
+#define GOT_SYS_MACOSX_H
 
-void SYS_SunOS_Initialise(void);
-
-void SYS_SunOS_Finalise(void);
+void SYS_MacOSX_SetScheduler(int SchedPriority);
+void SYS_MacOSX_Initialise(void);
+void SYS_MacOSX_Finalise(void);
 
 #endif

sys_netbsd.c

@@ -4,6 +4,7 @@
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2001
  * Copyright (C) J. Hannken-Illjes  2001
+ * Copyright (C) Miroslav Lichvar  2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -27,171 +28,27 @@
 
 #include "config.h"
 
-#ifdef __NetBSD__
-
-#include <kvm.h>
-#include <nlist.h>
-#include <fcntl.h>
-#include <assert.h>
-#include <sys/time.h>
-
-#include <stdio.h>
-#include <signal.h>
+#include "sysincl.h"
 
 #include "sys_netbsd.h"
-#include "localp.h"
+#include "sys_timex.h"
 #include "logging.h"
 #include "util.h"
 
-/* ================================================== */
+/* Maximum frequency offset accepted by the kernel (in ppm) */
+#define MAX_FREQ 500.0
 
-/* This register contains the number of seconds by which the local
-   clock was estimated to be fast of reference time at the epoch when
-   gettimeofday() returned T0 */
+/* Minimum assumed rate at which the kernel updates the clock frequency */
+#define MIN_TICK_RATE 100
 
-static double offset_register;
+/* Interval between kernel updates of the adjtime() offset */
+#define ADJTIME_UPDATE_INTERVAL 1.0
 
-/* This register contains the epoch to which the offset is referenced */
+/* Maximum adjtime() slew rate (in ppm) */
+#define MAX_ADJTIME_SLEWRATE 5000.0
 
-static struct timeval T0;
-
-/* This register contains the current estimate of the system
-   frequency, in absolute (NOT ppm) */
-
-static double current_freq;
-
-/* This register contains the number of seconds of adjustment that
-   were passed to adjtime last time it was called. */
-
-static double adjustment_requested;
-
-/* Kernel parameters to calculate adjtime error. */
-
-static int kern_tickadj;
-static long kern_bigadj;
-
-/* ================================================== */
-
-static void
-clock_initialise(void)
-{
-  struct timeval newadj, oldadj;
-
-  offset_register = 0.0;
-  adjustment_requested = 0.0;
-  current_freq = 0.0;
-
-  if (gettimeofday(&T0, NULL) < 0) {
-    LOG_FATAL(LOGF_SysNetBSD, "gettimeofday() failed");
-  }
-
-  newadj.tv_sec = 0;
-  newadj.tv_usec = 0;
-
-  if (adjtime(&newadj, &oldadj) < 0) {
-    LOG_FATAL(LOGF_SysNetBSD, "adjtime() failed");
-  }
-
-}
-
-/* ================================================== */
-
-static void
-clock_finalise(void)
-{
-  /* Nothing to do yet */
-
-}
-
-/* ================================================== */
-
-static void
-start_adjust(void)
-{
-  struct timeval newadj, oldadj;
-  struct timeval T1;
-  double elapsed, accrued_error;
-  double adjust_required;
-  struct timeval exact_newadj;
-  long delta, tickdelta;
-  double rounding_error;
-  double old_adjust_remaining;
-
-  /* Determine the amount of error built up since the last adjustment */
-  if (gettimeofday(&T1, NULL) < 0) {
-    LOG_FATAL(LOGF_SysNetBSD, "gettimeofday() failed");
-  }
-
-  UTI_DiffTimevalsToDouble(&elapsed, &T1, &T0);
-  accrued_error = elapsed * current_freq;
-  
-  adjust_required = - (accrued_error + offset_register);
-
-  UTI_DoubleToTimeval(adjust_required, &exact_newadj);
-
-  /* At this point, we need to round the required adjustment the
-     same way the kernel does. */
-
-  delta = exact_newadj.tv_sec * 1000000 + exact_newadj.tv_usec;
-  if (delta > kern_bigadj || delta < -kern_bigadj)
-    tickdelta = 10 * kern_tickadj;
-  else
-    tickdelta = kern_tickadj;
-  if (delta % tickdelta)
-	delta = delta / tickdelta * tickdelta;
-  newadj.tv_sec = 0;
-  newadj.tv_usec = delta;
-  UTI_NormaliseTimeval(&newadj);
-
-  /* Add rounding error back onto offset register. */
-  UTI_DiffTimevalsToDouble(&rounding_error, &newadj, &exact_newadj);
-
-  if (adjtime(&newadj, &oldadj) < 0) {
-    LOG_FATAL(LOGF_SysNetBSD, "adjtime() failed");
-  }
-
-  UTI_TimevalToDouble(&oldadj, &old_adjust_remaining);
-
-  offset_register = rounding_error - old_adjust_remaining;
-
-  T0 = T1;
-  UTI_TimevalToDouble(&newadj, &adjustment_requested);
-
-}
-
-/* ================================================== */
-
-static void
-stop_adjust(void)
-{
-  struct timeval T1;
-  struct timeval zeroadj, remadj;
-  double adjustment_remaining, adjustment_achieved;
-  double elapsed, elapsed_plus_adjust;
-
-  zeroadj.tv_sec = 0;
-  zeroadj.tv_usec = 0;
-
-  if (adjtime(&zeroadj, &remadj) < 0) {
-    LOG_FATAL(LOGF_SysNetBSD, "adjtime() failed");
-  }
-
-  if (gettimeofday(&T1, NULL) < 0) {
-    LOG_FATAL(LOGF_SysNetBSD, "gettimeofday() failed");
-  }
-  
-  UTI_DiffTimevalsToDouble(&elapsed, &T1, &T0);
-  UTI_TimevalToDouble(&remadj, &adjustment_remaining);
-
-  adjustment_achieved = adjustment_requested - adjustment_remaining;
-  elapsed_plus_adjust = elapsed - adjustment_achieved;
-
-  offset_register += current_freq * elapsed_plus_adjust - adjustment_remaining;
-
-  adjustment_requested = 0.0;
-  T0 = T1;
-
-}
+/* Minimum offset adjtime() slews faster than MAX_FREQ */
+#define MIN_FASTSLEW_OFFSET 1.0
 
 /* ================================================== */
 
@@ -201,61 +58,20 @@ stop_adjust(void)
 static void
 accrue_offset(double offset, double corr_rate)
 {
-  stop_adjust();
-  offset_register += offset;
-  start_adjust();
+  struct timeval newadj, oldadj;
 
-}
+  UTI_DoubleToTimeval(-offset, &newadj);
 
-/* ================================================== */
+  if (adjtime(&newadj, &oldadj) < 0)
+    LOG_FATAL(LOGF_SysNetBSD, "adjtime() failed");
 
-/* Positive offset means system clock is fast of true time, therefore
-   step backwards */
-
-static int
-apply_step_offset(double offset)
-{
-  struct timeval old_time, new_time, T1;
-  
-  stop_adjust();
-
-  if (gettimeofday(&old_time, NULL) < 0) {
-    LOG_FATAL(LOGF_SysNetBSD, "gettimeofday() failed");
+  /* Add the old remaining adjustment if not zero */
+  UTI_TimevalToDouble(&oldadj, &offset);
+  if (offset != 0.0) {
+    UTI_AddDoubleToTimeval(&newadj, offset, &newadj);
+    if (adjtime(&newadj, NULL) < 0)
+      LOG_FATAL(LOGF_SysNetBSD, "adjtime() failed");
   }
-
-  UTI_AddDoubleToTimeval(&old_time, -offset, &new_time);
-
-  if (settimeofday(&new_time, NULL) < 0) {
-    DEBUG_LOG(LOGF_SysNetBSD, "settimeofday() failed");
-    return 0;
-  }
-
-  UTI_AddDoubleToTimeval(&T0, offset, &T1);
-  T0 = T1;
-
-  start_adjust();
-
-  return 1;
-}
-
-/* ================================================== */
-
-static double
-set_frequency(double new_freq_ppm)
-{
-  stop_adjust();
-  current_freq = new_freq_ppm * 1.0e-6;
-  start_adjust();
-
-  return current_freq * 1.0e6;
-}
-
-/* ================================================== */
-
-static double
-read_frequency(void)
-{
-  return current_freq * 1.0e6;
 }
 
 /* ================================================== */
@@ -264,11 +80,21 @@ static void
 get_offset_correction(struct timeval *raw,
                       double *corr, double *err)
 {
-  stop_adjust();
-  *corr = -offset_register;
-  start_adjust();
-  if (err)
-    *err = 0.0;
+  struct timeval remadj;
+  double adjustment_remaining;
+
+  if (adjtime(NULL, &remadj) < 0)
+    LOG_FATAL(LOGF_SysNetBSD, "adjtime() failed");
+
+  UTI_TimevalToDouble(&remadj, &adjustment_remaining);
+
+  *corr = adjustment_remaining;
+  if (err) {
+    if (*corr != 0.0)
+      *err = 1.0e-6 * MAX_ADJTIME_SLEWRATE / ADJTIME_UPDATE_INTERVAL;
+    else
+      *err = 0.0;
+  }
 }
 
 /* ================================================== */
@@ -276,42 +102,10 @@ get_offset_correction(struct timeval *raw,
 void
 SYS_NetBSD_Initialise(void)
 {
-  static struct nlist nl[] = {
-    {"_tickadj"},
-    {"_bigadj"},
-    {NULL}
-  };
-
-  kvm_t *kt;
-
-  kt = kvm_open(NULL, NULL, NULL, O_RDONLY, NULL);
-  if (!kt) {
-    LOG_FATAL(LOGF_SysNetBSD, "Cannot open kvm");
-  }
-
-  if (kvm_nlist(kt, nl) < 0) {
-    LOG_FATAL(LOGF_SysNetBSD, "Cannot read kernel symbols");
-  }
-
-  if (kvm_read(kt, nl[0].n_value, (char *)(&kern_tickadj), sizeof(int)) < 0) {
-    LOG_FATAL(LOGF_SysNetBSD, "Cannot read from _tickadj");
-  }
-
-  if (kvm_read(kt, nl[1].n_value, (char *)(&kern_bigadj), sizeof(long)) < 0) {
-    /* kernel doesn't have the symbol, use one second instead */
-    kern_bigadj = 1000000;
-  }
-
-  kvm_close(kt);
-
-  clock_initialise();
-
-  lcl_RegisterSystemDrivers(read_frequency, set_frequency, 
-                            accrue_offset, apply_step_offset,
-                            get_offset_correction,
-                            NULL /* set_leap */,
-                            NULL /* set_sync_status */);
-
+  SYS_Timex_InitialiseWithFunctions(MAX_FREQ, 1.0 / MIN_TICK_RATE,
+                                    NULL, NULL, NULL,
+                                    MIN_FASTSLEW_OFFSET, MAX_ADJTIME_SLEWRATE,
+                                    accrue_offset, get_offset_correction);
 }
 
 /* ================================================== */
@@ -319,10 +113,32 @@ SYS_NetBSD_Initialise(void)
 void
 SYS_NetBSD_Finalise(void)
 {
-  clock_finalise();
+  SYS_Timex_Finalise();
 }
 
 /* ================================================== */
 
+#ifdef FEAT_PRIVDROP
+void
+SYS_NetBSD_DropRoot(uid_t uid, gid_t gid)
+{
+  int fd;
 
-#endif /* __NetBSD__ */
+  if (setgroups(0, NULL))
+    LOG_FATAL(LOGF_SysNetBSD, "setgroups() failed : %s", strerror(errno));
+
+  if (setgid(gid))
+    LOG_FATAL(LOGF_SysNetBSD, "setgid(%d) failed : %s", gid, strerror(errno));
+
+  if (setuid(uid))
+    LOG_FATAL(LOGF_SysNetBSD, "setuid(%d) failed : %s", uid, strerror(errno));
+
+  DEBUG_LOG(LOGF_SysNetBSD, "Root dropped to uid %d gid %d", uid, gid);
+
+  /* Check if we have write access to /dev/clockctl */
+  fd = open("/dev/clockctl", O_WRONLY);
+  if (fd < 0)
+    LOG_FATAL(LOGF_SysNetBSD, "Can't write to /dev/clockctl");
+  close(fd);
+}
+#endif

sys_netbsd.h

@@ -32,4 +32,6 @@ void SYS_NetBSD_Initialise(void);
 
 void SYS_NetBSD_Finalise(void);
 
+void SYS_NetBSD_DropRoot(uid_t uid, gid_t gid);
+
 #endif

sys_solaris.c

@@ -26,420 +26,18 @@
 
 #include "config.h"
 
-#ifdef SOLARIS
-
-#include <kvm.h>
-#include <fcntl.h>
-#include <nlist.h>
-#include <assert.h>
-#include <sys/time.h>
-#include <sys/utsname.h>
-
-#include <stdio.h>
+#include "sysincl.h"
 
 #include "sys_solaris.h"
-#include "localp.h"
-#include "sched.h"
-#include "logging.h"
-#include "util.h"
-
-/* ================================================== */
-
-/* This register contains the number of seconds by which the local
-   clock was estimated to be fast of reference time at the epoch when
-   gettimeofday() returned T0 */
-
-static double offset_register;
-
-/* This register contains the epoch to which the offset is referenced */
-
-static struct timeval T0;
-
-/* This register contains the current estimate of the system
-   frequency, in absolute (NOT ppm) */
-
-static double current_freq;
-
-/* This register contains the number of seconds of adjustment that
-   were passed to adjtime last time it was called. */
-
-static double adjustment_requested;
-
-/* ================================================== */
-/* On Solaris 2.5 & 2.5.1, passing an argument of zero as the new
-   delta to adjtime does not zero out the adjustment - the remaining
-   adjustment is returned as the old delta arg, but the adjustment keeps
-   running.  To get round this, we set adjustments of +/-1us when we
-   really want zero.  Alternate adjustments are used to avoid a drift
-   from building up. */
-
-static struct timeval zeroes[2] = {
-  {0, 1},
-  {-1, 999999}
-};
-
-static int index=0;
-
-/* If 1, need to run dosynctodr().  If 0, don't */
-static int need_dosynctodr = -1;
-
-
-#define GET_ZERO (zeroes[index^=1])
-
-/* ================================================== */
-
-static void
-clock_initialise(void)
-{
-  struct timeval newadj, oldadj;
-
-  offset_register = 0.0;
-  adjustment_requested = 0.0;
-  current_freq = 0.0;
-
-  if (gettimeofday(&T0, NULL) < 0) {
-    LOG_FATAL(LOGF_SysSolaris, "gettimeofday() failed");
-  }
-
-  newadj = GET_ZERO;
-
-  if (adjtime(&newadj, &oldadj) < 0) {
-    LOG_FATAL(LOGF_SysSolaris, "adjtime() failed");
-  }
-
-  if (adjtime(&newadj, &oldadj) < 0) {
-    LOG_FATAL(LOGF_SysSolaris, "adjtime() failed");
-  }
-}
-
-/* ================================================== */
-
-static void
-clock_finalise(void)
-{
-  /* Nothing to do yet */
-}
-
-/* ================================================== */
-
-static void
-start_adjust(void)
-{
-  struct timeval newadj, oldadj;
-  struct timeval T1;
-  double elapsed, accrued_error;
-  double adjust_required;
-  struct timeval exact_newadj;
-  double rounding_error;
-  double old_adjust_remaining;
-
-  /* Determine the amount of error built up since the last adjustment */
-  if (gettimeofday(&T1, NULL) < 0) {
-    LOG_FATAL(LOGF_SysSolaris, "gettimeofday() failed");
-  }
-
-  UTI_DiffTimevalsToDouble(&elapsed, &T1, &T0);
-  accrued_error = elapsed * current_freq;
-  
-  adjust_required = - (accrued_error + offset_register);
-
-  UTI_DoubleToTimeval(adjust_required, &exact_newadj);
-
-  /* At this point, we will need to call the adjustment rounding
-     algorithm in the system-specific layer.  For now, just assume the
-     adjustment can be applied exactly. */
-
-  newadj = exact_newadj;
-  
-  /* Want to *add* rounding error back onto offset register */
-  UTI_DiffTimevalsToDouble(&rounding_error, &exact_newadj, &newadj);
-
-  if (adjtime(&newadj, &oldadj) < 0) {
-    LOG_FATAL(LOGF_SysSolaris, "adjtime() failed");
-  }
-
-  UTI_TimevalToDouble(&oldadj, &old_adjust_remaining);
-
-  offset_register = rounding_error - old_adjust_remaining;
-
-  T0 = T1;
-  UTI_TimevalToDouble(&newadj, &adjustment_requested);
-  
-}
-
-/* ================================================== */
-
-static void
-stop_adjust(void)
-{
-  struct timeval T1;
-  struct timeval zeroadj, remadj;
-  double adjustment_remaining, adjustment_achieved;
-  double elapsed, elapsed_plus_adjust;
-
-
-  zeroadj = GET_ZERO;
-
-  if (adjtime(&zeroadj, &remadj) < 0) {
-    LOG_FATAL(LOGF_SysSolaris, "adjtime() failed");
-  }
-
-  if (gettimeofday(&T1, NULL) < 0) {
-    LOG_FATAL(LOGF_SysSolaris, "gettimeofday() failed");
-  }
-  
-  UTI_DiffTimevalsToDouble(&elapsed, &T1, &T0);
-  UTI_TimevalToDouble(&remadj, &adjustment_remaining);
-
-  adjustment_achieved = adjustment_requested - adjustment_remaining;
-  elapsed_plus_adjust = elapsed - adjustment_achieved;
-
-  offset_register += current_freq * elapsed_plus_adjust - adjustment_remaining;
-
-  adjustment_requested = 0.0;
-  T0 = T1;
-
-}
-
-/* ================================================== */
-
-/* Positive offset means system clock is fast of true time, therefore
-   slew backwards */
-
-static void
-accrue_offset(double offset, double corr_rate)
-{
-  stop_adjust();
-  offset_register += offset;
-  start_adjust();
-}
-
-/* ================================================== */
-
-/* Positive offset means system clock is fast of true time, therefore
-   step backwards */
-
-static int
-apply_step_offset(double offset)
-{
-  struct timeval old_time, new_time, rounded_new_time, T1;
-  double rounding_error;
-  
-  stop_adjust();
-  if (gettimeofday(&old_time, NULL) < 0) {
-    LOG_FATAL(LOGF_SysSolaris, "gettimeofday() failed");
-  }
-
-  UTI_AddDoubleToTimeval(&old_time, -offset, &new_time);
-
-  /* The settimeofday function (on Solaris 2.5/Sparc20 at least) does
-     not work quite as we would want.  The time we want to set is
-     rounded to the nearest second and that time is used.  Also, the
-     clock appears to start from that second boundary plus about 4ms.
-     For now we'll tolerate this small error. */
-
-  rounded_new_time.tv_usec = 0;
-  if (new_time.tv_usec >= 500000) {
-    rounded_new_time.tv_sec = new_time.tv_sec + 1;
-  } else {
-    rounded_new_time.tv_sec = new_time.tv_sec;
-  }
-
-  UTI_DiffTimevalsToDouble(&rounding_error, &rounded_new_time, &new_time);
-
-  if (settimeofday(&new_time, NULL) < 0) {
-    DEBUG_LOG(LOGF_SysSolaris, "settimeofday() failed");
-    return 0;
-  }
-
-  UTI_AddDoubleToTimeval(&T0, offset, &T1);
-  T0 = T1;
-
-  offset_register += rounding_error;
-
-  start_adjust();
-
-  return 1;
-}
-
-/* ================================================== */
-
-static double
-set_frequency(double new_freq_ppm)
-{
-  stop_adjust();
-  current_freq = new_freq_ppm * 1.0e-6;
-  start_adjust();
-
-  return current_freq * 1.0e6;
-}
-
-/* ================================================== */
-
-static double
-read_frequency(void)
-{
-  return current_freq * 1.0e6;
-}
-
-/* ================================================== */
-
-static void
-get_offset_correction(struct timeval *raw,
-                      double *corr, double *err)
-{
-  stop_adjust();
-  *corr = -offset_register;
-  start_adjust();
-  if (err)
-    *err = 0.0;
-}
-
-/* ================================================== */
-
-static void
-immediate_step(void)
-{
-}
-
-/* ================================================== */
-
-/* Interval in seconds between adjustments to cancel systematic drift */
-#define DRIFT_REMOVAL_INTERVAL (4.0)
-
-static int drift_removal_running = 0;
-static SCH_TimeoutID drift_removal_id;
-
-/* ================================================== */
-/* This is the timer callback routine which is called periodically to
-   invoke a time adjustment to take out the machine's drift.
-   Otherwise, times reported through this software (e.g. by running
-   ntpdate from another machine) show the machine being correct (since
-   they correct for drift build-up), but any program on this machine
-   that reads the system time will be given an erroneous value, the
-   degree of error depending on how long it is since
-   get_offset_correction was last called. */
-
-static void
-drift_removal_timeout(SCH_ArbitraryArgument not_used)
-{
-  stop_adjust();
-  start_adjust();
-  drift_removal_id = SCH_AddTimeoutByDelay(DRIFT_REMOVAL_INTERVAL, drift_removal_timeout, NULL);
-}
-
-/* ================================================== */
-
-static void
-check_need_dosynctodr(void)
-{
-  struct utsname name;
-  int result;
-  int major, minor, veryminor, n_fields;
-
-  result = uname(&name);
-  if (result < 0) {
-    LOG(LOGS_ERR, LOGF_SysSolaris, "Cannot use uname to detect Solaris version");
-    need_dosynctodr = 0; /* Assume recent Solaris where it isn't needed */
-    return;
-  }
-
-  n_fields = sscanf(name.release, "%d.%d.%d\n", &major, &minor, &veryminor);
-
-  if (n_fields < 2) {
-    LOG(LOGS_ERR, LOGF_SysSolaris, "Solaris version doesn't appear to be of the form X.Y[.Z]");
-    need_dosynctodr = 0; /* Assume recent Solaris where it isn't needed */
-    return;
-  }
-
-  if (major != 5) {
-    LOG(LOGS_ERR, LOGF_SysSolaris, "Solaris major version doesn't appear to be 5");
-    need_dosynctodr = 0; /* Assume recent Solaris where it isn't needed */
-    return;
-  }
-
-  /* The 'rule of thumb' is that from Solaris 2.6 onwards, dosynctodr() doesn't
-   * need to be called, and in fact it is counter-productive to do so.  For
-   * earlier versions, it is required. */ 
-
-  if (minor < 6) {
-    need_dosynctodr = 1;
-  } else {
-    need_dosynctodr = 0;
-  }
-  
-}
-
-/* ================================================== */
-
-static void
-set_dosynctodr(unsigned long on_off)
-{
-  static struct nlist nl[] = {
-    {"dosynctodr"},
-    {NULL}
-  };
-
-  kvm_t *kt;
-  unsigned long read_back;
-
-  assert(on_off == 1 || on_off == 0);
-
-  kt = kvm_open(NULL, NULL, NULL, O_RDWR, NULL);
-  if (!kt) {
-    LOG(LOGS_ERR, LOGF_SysSolaris, "Cannot open kvm to change dosynctodr");
-    return;
-  }
-
-  if (kvm_nlist(kt, nl) < 0) {
-    LOG(LOGS_ERR, LOGF_SysSolaris, "Cannot read dosynctodr in nlist");
-    kvm_close(kt);
-    return;
-  }
-
-  if (kvm_write(kt, nl[0].n_value, (char *)(&on_off), sizeof(unsigned long)) < 0) {
-    LOG(LOGS_ERR, LOGF_SysSolaris, "Cannot write to dosynctodr");
-    kvm_close(kt);
-    return;
-  }
-
-  if (kvm_read(kt, nl[0].n_value, (char *)(&read_back), sizeof(unsigned long)) < 0) {
-    LOG(LOGS_ERR, LOGF_SysSolaris, "Cannot read from dosynctodr");
-    kvm_close(kt);
-    return;
-  }
-
-  kvm_close(kt);
-
-  assert(read_back == on_off);
-}
+#include "sys_timex.h"
 
 /* ================================================== */
 
 void
 SYS_Solaris_Initialise(void)
 {
-
-  check_need_dosynctodr();
-
-  /* Need to do KVM stuff to turn off dosynctodr. */
-
-  clock_initialise();
-
-  lcl_RegisterSystemDrivers(read_frequency, set_frequency, 
-                            accrue_offset, apply_step_offset,
-                            get_offset_correction,
-                            NULL /* set_leap */,
-                            NULL /* set_sync_status */);
-
-  /* Turn off the kernel switch that keeps the system clock in step
-     with the non-volatile clock */
-  if (need_dosynctodr) {
-    set_dosynctodr(0);
-  }
-
-  drift_removal_id = SCH_AddTimeoutByDelay(DRIFT_REMOVAL_INTERVAL, drift_removal_timeout, NULL);
-  drift_removal_running = 1;
+  /* The kernel allows the frequency to be set in the full range off int32_t */
+  SYS_Timex_InitialiseWithFunctions(32500, 1.0 / 100, NULL, NULL, NULL);
 }
 
 /* ================================================== */
@@ -447,21 +45,5 @@ SYS_Solaris_Initialise(void)
 void
 SYS_Solaris_Finalise(void)
 {
-
-  if (drift_removal_running) {
-    SCH_RemoveTimeout(drift_removal_id);
-  }
-
-  clock_finalise();
-
-  /* When exiting, we want to return the machine to its 'autonomous'
-     tracking mode */
-  if (need_dosynctodr) {
-    set_dosynctodr(1);
-  }
+  SYS_Timex_Finalise();
 }
-
-/* ================================================== */
-
-#endif /* SOLARIS */
-

sys_timex.c

@@ -0,0 +1,243 @@
+/*
+  chronyd/chronyc - Programs for keeping computer clocks accurate.
+
+ **********************************************************************
+ * Copyright (C) Richard P. Curnow  1997-2003
+ * Copyright (C) Miroslav Lichvar  2009-2012, 2014-2015
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ * 
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ * 
+ **********************************************************************
+
+  =======================================================================
+
+  Driver for systems that implement the adjtimex()/ntp_adjtime() system call
+  */
+
+#include "config.h"
+
+#include "sysincl.h"
+
+#include "conf.h"
+#include "sys_generic.h"
+#include "sys_timex.h"
+#include "logging.h"
+
+#ifdef LINUX
+#define NTP_ADJTIME adjtimex
+#define NTP_ADJTIME_NAME "adjtimex"
+#else
+#define NTP_ADJTIME ntp_adjtime
+#define NTP_ADJTIME_NAME "ntp_adjtime"
+#endif
+
+/* Maximum frequency offset accepted by the kernel (in ppm) */
+#define MAX_FREQ 500.0
+
+/* Frequency scale to convert from ppm to the timex freq */
+#define FREQ_SCALE (double)(1 << 16)
+
+/* Threshold for the timex maxerror when the kernel sets the UNSYNC flag */
+#define MAX_SYNC_ERROR 16.0
+
+/* Minimum assumed rate at which the kernel updates the clock frequency */
+#define MIN_TICK_RATE 100
+
+/* Saved timex status */
+static int status;
+
+/* ================================================== */
+
+static double
+read_frequency(void)
+{
+  struct timex txc;
+
+  txc.modes = 0;
+
+  SYS_Timex_Adjust(&txc, 0);
+
+  return txc.freq / -FREQ_SCALE;
+}
+
+/* ================================================== */
+
+static double
+set_frequency(double freq_ppm)
+{
+  struct timex txc;
+
+  txc.modes = MOD_FREQUENCY;
+  txc.freq = freq_ppm * -FREQ_SCALE;
+
+  SYS_Timex_Adjust(&txc, 0);
+
+  return txc.freq / -FREQ_SCALE;
+}
+
+/* ================================================== */
+
+static void
+set_leap(int leap)
+{
+  struct timex txc;
+  int applied;
+
+  applied = 0;
+  if (!leap) {
+    txc.modes = 0;
+    if (SYS_Timex_Adjust(&txc, 1) == TIME_WAIT)
+      applied = 1;
+  }
+
+  status &= ~(STA_INS | STA_DEL);
+
+  if (leap > 0)
+    status |= STA_INS;
+  else if (leap < 0)
+    status |= STA_DEL;
+
+  txc.modes = MOD_STATUS;
+  txc.status = status;
+
+  SYS_Timex_Adjust(&txc, 0);
+
+  LOG(LOGS_INFO, LOGF_SysTimex, "System clock status %s leap second",
+      leap ? (leap > 0 ? "set to insert" : "set to delete") :
+      (applied ? "reset after" : "set to not insert/delete"));
+}
+
+/* ================================================== */
+
+static void
+set_sync_status(int synchronised, double est_error, double max_error)
+{
+  struct timex txc;
+
+  if (synchronised) {
+    if (est_error > MAX_SYNC_ERROR)
+      est_error = MAX_SYNC_ERROR;
+    if (max_error >= MAX_SYNC_ERROR) {
+      max_error = MAX_SYNC_ERROR;
+      synchronised = 0;
+    }
+  } else {
+    est_error = max_error = MAX_SYNC_ERROR;
+  }
+
+#ifdef LINUX
+  /* On Linux clear the UNSYNC flag only if rtcsync is enabled */
+  if (!CNF_GetRtcSync())
+    synchronised = 0;
+#endif
+
+  if (synchronised)
+    status &= ~STA_UNSYNC;
+  else
+    status |= STA_UNSYNC;
+
+  txc.modes = MOD_STATUS | MOD_ESTERROR | MOD_MAXERROR;
+  txc.status = status;
+  txc.esterror = est_error * 1.0e6;
+  txc.maxerror = max_error * 1.0e6;
+
+  SYS_Timex_Adjust(&txc, 1);
+}
+
+/* ================================================== */
+
+static void
+initialise_timex(void)
+{
+  struct timex txc;
+
+  status = STA_UNSYNC;
+
+  /* Reset PLL offset */
+  txc.modes = MOD_OFFSET | MOD_STATUS;
+  txc.status = STA_PLL | status;
+  txc.offset = 0;
+  SYS_Timex_Adjust(&txc, 0);
+
+  /* Turn PLL off */
+  txc.modes = MOD_STATUS;
+  txc.status = status;
+  SYS_Timex_Adjust(&txc, 0);
+}
+
+/* ================================================== */
+
+void
+SYS_Timex_Initialise(void)
+{
+  SYS_Timex_InitialiseWithFunctions(MAX_FREQ, 1.0 / MIN_TICK_RATE, NULL, NULL, NULL,
+                                    0.0, 0.0, NULL, NULL);
+}
+
+/* ================================================== */
+
+void
+SYS_Timex_InitialiseWithFunctions(double max_set_freq_ppm, double max_set_freq_delay,
+                                  lcl_ReadFrequencyDriver sys_read_freq,
+                                  lcl_SetFrequencyDriver sys_set_freq,
+                                  lcl_ApplyStepOffsetDriver sys_apply_step_offset,
+                                  double min_fastslew_offset, double max_fastslew_rate,
+                                  lcl_AccrueOffsetDriver sys_accrue_offset,
+                                  lcl_OffsetCorrectionDriver sys_get_offset_correction)
+{
+  initialise_timex();
+
+  SYS_Generic_CompleteFreqDriver(max_set_freq_ppm, max_set_freq_delay,
+                                 sys_read_freq ? sys_read_freq : read_frequency,
+                                 sys_set_freq ? sys_set_freq : set_frequency,
+                                 sys_apply_step_offset,
+                                 min_fastslew_offset, max_fastslew_rate,
+                                 sys_accrue_offset, sys_get_offset_correction,
+                                 set_leap, set_sync_status);
+}
+
+/* ================================================== */
+
+void
+SYS_Timex_Finalise(void)
+{
+  SYS_Generic_Finalise();
+}
+
+/* ================================================== */
+
+int
+SYS_Timex_Adjust(struct timex *txc, int ignore_error)
+{
+  int state;
+
+#ifdef SOLARIS
+  /* The kernel seems to check the constant even when it's not being set */
+  if (!(txc->modes & MOD_TIMECONST))
+    txc->constant = 10;
+#endif
+
+  state = NTP_ADJTIME(txc);
+
+  if (state < 0) {
+    if (!ignore_error)
+      LOG_FATAL(LOGF_SysTimex, NTP_ADJTIME_NAME"(0x%x) failed : %s",
+                txc->modes, strerror(errno));
+    else
+      DEBUG_LOG(LOGF_SysTimex, NTP_ADJTIME_NAME"(0x%x) failed : %s",
+                txc->modes, strerror(errno));
+  }
+
+  return state;
+}

sys_timex.h

@@ -0,0 +1,50 @@
+/*
+  chronyd/chronyc - Programs for keeping computer clocks accurate.
+
+ **********************************************************************
+ * Copyright (C) Miroslav Lichvar  2015
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ * 
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ * 
+ **********************************************************************
+
+  =======================================================================
+
+  Header file for a driver based on the adjtimex()/ntp_adjtime() function
+  */
+
+#ifndef GOT_SYS_TIMEX_H
+#define GOT_SYS_TIMEX_H
+
+#include <sys/timex.h>
+
+#include "localp.h"
+
+extern void SYS_Timex_Initialise(void);
+
+/* Initialise with some driver functions replaced with special versions */
+extern void SYS_Timex_InitialiseWithFunctions(double max_set_freq_ppm, double max_set_freq_delay,
+                                              lcl_ReadFrequencyDriver sys_read_freq,
+                                              lcl_SetFrequencyDriver sys_set_freq,
+                                              lcl_ApplyStepOffsetDriver sys_apply_step_offset,
+                                              double min_fastslew_offset, double max_fastslew_rate,
+                                              lcl_AccrueOffsetDriver sys_accrue_offset,
+                                              lcl_OffsetCorrectionDriver sys_get_offset_correction);
+
+extern void SYS_Timex_Finalise(void);
+
+/* Wrapper for adjtimex()/ntp_adjtime() */
+extern int SYS_Timex_Adjust(struct timex *txc, int ignore_error);
+
+#endif  /* GOT_SYS_GENERIC_H */

sysincl.h

@@ -29,22 +29,16 @@
 #ifndef GOT_SYSINCL_H
 #define GOT_SYSINCL_H
 
-#if defined (SOLARIS) || defined(SUNOS) || defined(LINUX) || defined(__NetBSD__)
-
-#if !defined(__NetBSD__) && !defined(__FreeBSD__)
-#include <alloca.h>
-#endif
 #include <assert.h>
 #include <ctype.h>
 #include <errno.h>
 #include <fcntl.h>
 #include <float.h>
-#if !defined(__FreeBSD__)
-#include <malloc.h>
-#endif
+#include <glob.h>
 #include <math.h>
 #include <netdb.h>
 #include <netinet/in.h>
+#include <pwd.h>
 #include <resolv.h>
 #include <signal.h>
 #include <stdarg.h>
@@ -61,6 +55,7 @@
 #include <sys/shm.h>
 #include <syslog.h>
 #include <time.h>
+#include <unistd.h>
 
 #ifdef HAVE_INTTYPES_H
 #include <inttypes.h>
@@ -70,62 +65,9 @@
 /* Tough */
 #endif
 
-/* One or other of these to make getsid() visible */
-#define __EXTENSIONS__ 1
-#define __USE_XOPEN_EXTENDED 1
-
-#include <unistd.h>
-
-#endif
-
 #ifdef FEAT_IPV6
 /* For inet_ntop() */
 #include <arpa/inet.h>
 #endif
 
-#if defined (SOLARIS) || defined(SUNOS)
-/* Only needed on these platforms, and doesn't exist on some Linux
-   versions. */
-#include <nlist.h>
-#endif
-
-#if defined (WINNT)
-
-/* Designed to work with the GCC from the GNAT-3.10 for Win32
-   distribution */
-
-#define Win32_Winsock
-#include <assert.h>
-#include <ctype.h>
-
-#if 1
-/* Cheat and inline the necessary bits from <errno.h>.  We don't
-   include it directly because it redefines some EXXX constants that
-   conflict with <windows32/sockets.h> (included by <windows.h>) */
-
-int*	_errno();
-int*	__doserrno();
-
-#define	errno		(*_errno())
-#define	_doserrno	(*__doserrno())
-
-#define ENOENT 2
-#else
-
-#include <errno.h>
-#endif
-
-
-#include <float.h>
-#include <math.h>
-#include <signal.h>
-#include <stddef.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <time.h>
-#include <windows.h>
-#endif
-
 #endif /* GOT_SYSINCL_H */

test/compilation/001-features

@@ -5,8 +5,14 @@
 cd ../..
 
 for opts in \
+	"--enable-debug" \
 	"--disable-asyncdns" \
+	"--disable-ipv6" \
+	"--disable-privdrop" \
+	"--disable-readline" \
 	"--disable-rtc" \
+	"--disable-scfilter" \
+	"--disable-sechash" \
 	"--disable-cmdmon" \
 	"--disable-ntp" \
 	"--disable-refclock" \
@@ -15,5 +21,5 @@ for opts in \
 	"--disable-cmdmon --disable-ntp --disable-refclock"
 do
 	./configure $opts
-	make || exit 1
+	make "$@" || exit 1
 done

test/kernel/Makefile

@@ -0,0 +1,7 @@
+CFLAGS=-O2 -Wall
+PROGS=adjtime ntpadjtime
+
+all: $(PROGS)
+
+clean:
+	rm -f $(PROGS)

test/kernel/adjtime.c

@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) Miroslav Lichvar  2015
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ * 
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+/* Test the system adjtime() function. Check the range of supported offset,
+   support for readonly operation, and slew rate with different update
+   intervals and offsets. */
+
+#include <errno.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/time.h>
+#include <unistd.h>
+
+static int
+diff_tv(struct timeval *tv1, struct timeval *tv2)
+{
+  return 1000000 * (tv1->tv_sec - tv2->tv_sec) + (tv1->tv_usec - tv2->tv_usec);
+}
+
+static struct timeval
+usec_to_tv(int usec)
+{
+  struct timeval tv;
+
+  tv.tv_sec = usec / 1000000;
+  tv.tv_usec = usec % 1000000;
+
+  return tv;
+}
+
+static int
+try_adjtime(struct timeval *new, struct timeval *old)
+{
+  int r;
+
+  r = adjtime(new, old);
+  if (r)
+    printf("adjtime() failed : %s ", strerror(errno));
+  return r;
+}
+
+static void
+reset_adjtime(void)
+{
+  struct timeval tv;
+
+  tv = usec_to_tv(0);
+  try_adjtime(&tv, NULL);
+}
+
+static void
+test_range(void)
+{
+  struct timeval tv;
+  int i;
+
+  printf("range:\n");
+
+  for (i = 0; i < sizeof (time_t) * 8; i++) {
+    tv.tv_usec = 0;
+    tv.tv_sec = (1ULL << i) - 1;
+    printf("%20lld s : ", (long long)tv.tv_sec);
+    printf("%s\n", !try_adjtime(&tv, NULL) ? "ok" : "");
+    tv.tv_sec = ~tv.tv_sec;
+    printf("%20lld s : ", (long long)tv.tv_sec);
+    printf("%s\n", !try_adjtime(&tv, NULL) ? "ok" : "");
+  }
+}
+
+static void
+test_readonly(void)
+{
+  struct timeval tv1, tv2;
+  int i, r;
+
+  printf("readonly:\n");
+
+  for (i = 0; i <= 20; i++) {
+    tv1 = usec_to_tv(1 << i);
+
+    printf("%9d us : ", 1 << i);
+    try_adjtime(&tv1, NULL);
+    r = !try_adjtime(NULL, &tv2) && !diff_tv(&tv1, &tv2);
+    printf("%s\n", r ? "ok" : "fail");
+  }
+}
+
+static void
+test_readwrite(void)
+{
+  struct timeval tv1, tv2, tv3;
+  int i, r;
+
+  printf("readwrite:\n");
+
+  for (i = 0; i <= 20; i++) {
+    tv1 = usec_to_tv(1 << i);
+    tv3 = usec_to_tv(0);
+
+    printf("%9d us : ", 1 << i);
+    try_adjtime(&tv1, NULL);
+    r = !try_adjtime(&tv3, &tv2) && !diff_tv(&tv1, &tv2);
+    printf("%s\n", r ? "ok" : "fail");
+  }
+}
+
+static void
+xusleep(int usec)
+{
+  struct timeval tv;
+
+  tv = usec_to_tv(usec);
+  select(0, NULL, NULL, NULL, &tv);
+}
+
+static void
+test_slew(void)
+{
+  struct timeval tv1, tv2, tv3;
+  int i, j, k, diff, min, has_min;
+
+  printf("slew:\n");
+
+  for (i = 9; i <= 20; i++) {
+    printf("%9d us : ", 1 << i);
+    for (j = 4; j <= 20; j += 4) {
+      for (min = has_min = 0, k = 4; k < 16; k += 2) {
+
+        tv1 = usec_to_tv(1 << j);
+        tv3 = usec_to_tv(0);
+
+        xusleep(1 << i);
+        reset_adjtime();
+
+        xusleep(1 << i);
+        if (try_adjtime(&tv1, NULL))
+          continue;
+
+        xusleep(1 << i);
+        if (try_adjtime(&tv3, &tv2))
+          continue;
+
+        diff = diff_tv(&tv1, &tv2);
+        if (!has_min || min > diff) {
+          min = diff;
+          has_min = 1;
+        }
+      }
+
+      if (!has_min)
+        continue;
+
+      printf(" %5d (%d)", min, 1 << j);
+      fflush(stdout);
+    }
+    printf("\n");
+  }
+}
+
+int
+main()
+{
+  test_range();
+  test_readonly();
+  test_readwrite();
+  test_slew();
+
+  reset_adjtime();
+
+  return 0;
+}

test/kernel/ntpadjtime.c

@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) Miroslav Lichvar  2015
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ * 
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+/* Check the frequency range of the system ntp_adjtime() implementation */
+
+#include <errno.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+
+static int
+try_ntpadjtime(struct timex *t)
+{
+  int r;
+  r = ntp_adjtime(t);
+  if (r < 0)
+    printf("ntp_adjtime() failed : %s ", strerror(errno));
+  return r;
+}
+
+static void
+reset_ntpadjtime(void)
+{
+  struct timex t;
+
+  t.modes = MOD_OFFSET | MOD_FREQUENCY;
+  t.offset = 0;
+  t.freq = 0;
+  try_ntpadjtime(&t);
+}
+
+static void
+test_freqrange(void)
+{
+  struct timex t;
+  int i;
+
+  printf("freq range:\n");
+
+  for (i = 0; i <= 1000; i += 50) {
+    t.modes = MOD_FREQUENCY;
+    t.freq = i << 16;
+    printf("%4d ppm => ", i);
+    if (try_ntpadjtime(&t) < 0)
+      continue;
+
+    printf("%4ld ppm : ", t.freq / (1 << 16));
+    printf("%s\n", t.freq == i << 16 ? "ok" : "fail");
+  }
+}
+
+int
+main()
+{
+  test_freqrange();
+
+  reset_ntpadjtime();
+
+  return 0;
+}

test/simulation/113-leapsecond

@@ -27,18 +27,20 @@ for leapmode in system step slew; do
 	check_sync || test_fail
 done
 
-server_conf="refclock SHM 0 dpoll 10 poll 10
-leapsectz right/UTC
-leapsecmode slew
-smoothtime 400 0.001"
-client_conf="leapsecmode system"
-min_sync_time=230000
-max_sync_time=240000
+for smoothmode in "" "leaponly"; do
+	server_conf="refclock SHM 0 dpoll 10 poll 10
+	leapsectz right/UTC
+	leapsecmode slew
+	smoothtime 400 0.001 $smoothmode"
+	client_conf="leapsecmode system"
+	min_sync_time=230000
+	max_sync_time=240000
 
-run_test || test_fail
-check_chronyd_exit || test_fail
-check_source_selection || test_fail
-check_packet_interval || test_fail
-check_sync || test_fail
+	run_test || test_fail
+	check_chronyd_exit || test_fail
+	check_source_selection || test_fail
+	check_packet_interval || test_fail
+	check_sync || test_fail
+done
 
 test_pass

test/simulation/114-presend

@@ -6,6 +6,7 @@ test_start "presend option"
 min_sync_time=140
 max_sync_time=260
 client_server_options="presend 6 maxdelay 16"
+client_conf="maxdistance 10"
 
 run_test || test_fail
 check_chronyd_exit || test_fail

test/simulation/202-prefer

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+. test.common
+
+# Test fix in commit 4253075a97141edfa62043ab71bd0673587e6629
+
+test_start "prefer option"
+
+servers=3
+client_server_conf="
+server 192.168.123.1
+server 192.168.123.2
+server 192.168.123.3 prefer"
+
+run_test || test_fail
+check_chronyd_exit || test_fail
+check_source_selection || test_fail
+check_packet_interval || test_fail
+check_sync || test_fail
+
+test_pass

test/simulation/test.common

@@ -18,7 +18,7 @@ export PATH=../../:$PATH
 export CLKNETSIM_PATH=clknetsim
 
 # Known working clknetsim revision
-clknetsim_revision=3eb3a8d9acf60c31f5acc66617175fc748ef367e
+clknetsim_revision=1e56224dee1db69c0027e9bd63c2a202d4765959
 clknetsim_url=https://github.com/mlichvar/clknetsim/archive/$clknetsim_revision.tar.gz
 
 # Only Linux is supported
@@ -65,6 +65,7 @@ default_chronyc_start=1000.0
 default_server_step=""
 default_client_step=""
 
+default_client_server_conf=""
 default_server_server_options=""
 default_client_server_options=""
 default_server_peer_options=""
@@ -192,9 +193,13 @@ get_chronyd_conf() {
 		done
 		echo "$server_conf"
 	else
-		for i in $(seq 1 $servers); do
-			echo "server 192.168.123.$[$servers * ($stratum - 2) + $i] $client_server_options"
-		done
+		if [ -n "$client_server_conf" ]; then
+			echo "$client_server_conf"
+		else
+			for i in $(seq 1 $servers); do
+				echo "server 192.168.123.$[$servers * ($stratum - 2) + $i] $client_server_options"
+			done
+		fi
 		for i in $(seq 1 $peers); do
 			[ $i -eq $peer -o $i -gt $clients ] && continue
 			echo "peer 192.168.123.$[$servers * ($stratum - 1) + $i] $client_peer_options"

util.c

@@ -3,7 +3,7 @@
 
  **********************************************************************
  * Copyright (C) Richard P. Curnow  1997-2003
- * Copyright (C) Miroslav Lichvar  2009, 2012-2014
+ * Copyright (C) Miroslav Lichvar  2009, 2012-2015
  * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -29,12 +29,14 @@
 
 #include "sysincl.h"
 
+#include "logging.h"
+#include "memory.h"
 #include "util.h"
 #include "hash.h"
 
 /* ================================================== */
 
-INLINE_STATIC void
+void
 UTI_TimevalToDouble(struct timeval *a, double *b)
 {
   *b = (double)(a->tv_sec) + 1.0e-6 * (double)(a->tv_usec);
@@ -43,20 +45,22 @@ UTI_TimevalToDouble(struct timeval *a, double *b)
 
 /* ================================================== */
 
-INLINE_STATIC void
+void
 UTI_DoubleToTimeval(double a, struct timeval *b)
 {
-  long int_part, frac_part;
+  long int_part;
+  double frac_part;
   int_part = (long)(a);
-  frac_part = (long)(0.5 + 1.0e6 * (a - (double)(int_part)));
+  frac_part = 1.0e6 * (a - (double)(int_part));
+  frac_part = frac_part > 0 ? frac_part + 0.5 : frac_part - 0.5;
   b->tv_sec = int_part;
-  b->tv_usec = frac_part;
+  b->tv_usec = (long)frac_part;
   UTI_NormaliseTimeval(b);
 }
 
 /* ================================================== */
 
-INLINE_STATIC int
+int
 UTI_CompareTimevals(struct timeval *a, struct timeval *b)
 {
   if (a->tv_sec < b->tv_sec) {
@@ -76,7 +80,7 @@ UTI_CompareTimevals(struct timeval *a, struct timeval *b)
 
 /* ================================================== */
 
-INLINE_STATIC void
+void
 UTI_NormaliseTimeval(struct timeval *x)
 {
   /* Reduce tv_usec to within +-1000000 of zero. JGH */
@@ -95,7 +99,7 @@ UTI_NormaliseTimeval(struct timeval *x)
 
 /* ================================================== */
 
-INLINE_STATIC void
+void
 UTI_DiffTimevals(struct timeval *result,
                  struct timeval *a,
                  struct timeval *b)
@@ -112,7 +116,7 @@ UTI_DiffTimevals(struct timeval *result,
 /* ================================================== */
 
 /* Calculate result = a - b and return as a double */
-INLINE_STATIC void
+void
 UTI_DiffTimevalsToDouble(double *result, 
                          struct timeval *a,
                          struct timeval *b)
@@ -123,7 +127,7 @@ UTI_DiffTimevalsToDouble(double *result,
 
 /* ================================================== */
 
-INLINE_STATIC void
+void
 UTI_AddDoubleToTimeval(struct timeval *start,
                        double increment,
                        struct timeval *end)
@@ -147,7 +151,7 @@ UTI_AddDoubleToTimeval(struct timeval *start,
 /* ================================================== */
 
 /* Calculate the average and difference (as a double) of two timevals */
-INLINE_STATIC void
+void
 UTI_AverageDiffTimevals (struct timeval *earlier,
                          struct timeval *later,
                          struct timeval *average,
@@ -485,6 +489,55 @@ UTI_IPAndPortToSockaddr(IPAddr *ip, unsigned short port, struct sockaddr *sa)
 
 /* ================================================== */
 
+char *UTI_SockaddrToString(struct sockaddr *sa)
+{
+  unsigned short port;
+  IPAddr ip;
+  char *result;
+
+  result = NEXT_BUFFER;
+
+  switch (sa->sa_family) {
+    case AF_INET:
+#ifdef AF_INET6
+    case AF_INET6:
+#endif
+      UTI_SockaddrToIPAndPort(sa, &ip, &port);
+      snprintf(result, BUFFER_LENGTH, "%s:%hu", UTI_IPToString(&ip), port);
+      break;
+    case AF_UNIX:
+      snprintf(result, BUFFER_LENGTH, "%s", ((struct sockaddr_un *)sa)->sun_path);
+      break;
+    default:
+      snprintf(result, BUFFER_LENGTH, "[UNKNOWN]");
+  }
+
+  return result;
+}
+
+/* ================================================== */
+
+const char *
+UTI_SockaddrFamilyToString(int family)
+{
+  switch (family) {
+    case AF_INET:
+      return "IPv4";
+#ifdef AF_INET6
+    case AF_INET6:
+      return "IPv6";
+#endif
+    case AF_UNIX:
+      return "Unix";
+    case AF_UNSPEC:
+      return "UNSPEC";
+    default:
+      return "?";
+  }
+}
+
+/* ================================================== */
+
 char *
 UTI_TimeToLogForm(time_t t)
 {
@@ -643,6 +696,22 @@ UTI_IsTimeOffsetSane(struct timeval *tv, double offset)
 
 /* ================================================== */
 
+double
+UTI_Log2ToDouble(int l)
+{
+  if (l >= 0) {
+    if (l > 31)
+      l = 31;
+    return (uint32_t)1 << l;
+  } else {
+    if (l < -31)
+      l = -31;
+    return 1.0 / ((uint32_t)1 << -l);
+  }
+}
+
+/* ================================================== */
+
 void
 UTI_TimevalNetworkToHost(Timeval *src, struct timeval *dest)
 {
@@ -707,7 +776,11 @@ UTI_FloatHostToNetwork(double x)
   if (x < 0.0) {
     x = -x;
     neg = 1;
+  } else if (x >= 0.0) {
+    neg = 0;
   } else {
+    /* Save NaN as zero */
+    x = 0.0;
     neg = 0;
   }
 
@@ -817,3 +890,183 @@ UTI_DecodePasswordFromText(char *key)
     return len;
   }
 }
+
+/* ================================================== */
+
+int
+UTI_SetQuitSignalsHandler(void (*handler)(int))
+{
+  struct sigaction sa;
+
+  sa.sa_handler = handler;
+  sa.sa_flags = SA_RESTART;
+  if (sigemptyset(&sa.sa_mask) < 0)
+    return 0;
+
+#ifdef SIGINT
+  if (sigaction(SIGINT, &sa, NULL) < 0)
+    return 0;
+#endif
+#ifdef SIGTERM
+  if (sigaction(SIGTERM, &sa, NULL) < 0)
+    return 0;
+#endif
+#ifdef SIGQUIT
+  if (sigaction(SIGQUIT, &sa, NULL) < 0)
+    return 0;
+#endif
+#ifdef SIGHUP
+  if (sigaction(SIGHUP, &sa, NULL) < 0)
+    return 0;
+#endif
+
+  return 1;
+}
+
+/* ================================================== */
+
+char *
+UTI_PathToDir(const char *path)
+{
+  char *dir, *slash;
+
+  slash = strrchr(path, '/');
+
+  if (!slash)
+    return Strdup(".");
+
+  if (slash == path)
+    return Strdup("/");
+
+  dir = Malloc(slash - path + 1);
+  snprintf(dir, slash - path + 1, "%s", path);
+
+  return dir;
+}
+
+/* ================================================== */
+
+static int
+create_dir(char *p, mode_t mode, uid_t uid, gid_t gid)
+{
+  int status;
+  struct stat buf;
+
+  /* See if directory exists */
+  status = stat(p, &buf);
+
+  if (status < 0) {
+    if (errno != ENOENT) {
+      LOG(LOGS_ERR, LOGF_Util, "Could not access %s : %s", p, strerror(errno));
+      return 0;
+    }
+  } else {
+    if (S_ISDIR(buf.st_mode))
+      return 1;
+    LOG(LOGS_ERR, LOGF_Util, "%s is not directory", p);
+    return 0;
+  }
+
+  /* Create the directory */
+  if (mkdir(p, mode) < 0) {
+    LOG(LOGS_ERR, LOGF_Util, "Could not create directory %s : %s", p, strerror(errno));
+    return 0;
+  }
+
+  /* Set its owner */
+  if (chown(p, uid, gid) < 0) {
+    LOG(LOGS_ERR, LOGF_Util, "Could not change ownership of %s : %s", p, strerror(errno));
+    /* Don't leave it there with incorrect ownership */
+    rmdir(p);
+    return 0;
+  }
+
+  return 1;
+}
+
+/* ================================================== */
+/* Return 0 if the directory couldn't be created, 1 if it could (or
+   already existed) */
+int
+UTI_CreateDirAndParents(const char *path, mode_t mode, uid_t uid, gid_t gid)
+{
+  char *p;
+  int i, j, k, last;
+
+  /* Don't try to create current directory */
+  if (!strcmp(path, "."))
+    return 1;
+
+  p = (char *)Malloc(1 + strlen(path));
+
+  i = k = 0;
+  while (1) {
+    p[i++] = path[k++];
+
+    if (path[k] == '/' || !path[k]) {
+      /* Check whether its end of string, a trailing / or group of / */
+      last = 1;
+      j = k;
+      while (path[j]) {
+        if (path[j] != '/') {
+          /* Pick up a / into p[] thru the assignment at the top of the loop */
+          k = j - 1;
+          last = 0;
+          break;
+        }
+        j++;
+      }
+
+      p[i] = 0;
+
+      if (!create_dir(p, last ? mode : 0755, last ? uid : 0, last ? gid : 0)) {
+        Free(p);
+        return 0;
+      }
+
+      if (last)
+        break;
+    }
+
+    if (!path[k])
+      break;
+  }
+
+  Free(p);
+  return 1;
+}
+
+/* ================================================== */
+
+int
+UTI_CheckDirPermissions(const char *path, mode_t perm, uid_t uid, gid_t gid)
+{
+  struct stat buf;
+
+  if (stat(path, &buf)) {
+    LOG(LOGS_ERR, LOGF_Util, "Could not access %s : %s", path, strerror(errno));
+    return 0;
+  }
+
+  if (!S_ISDIR(buf.st_mode)) {
+    LOG(LOGS_ERR, LOGF_Util, "%s is not directory", path);
+    return 0;
+  }
+
+  if ((buf.st_mode & 0777) & ~perm) {
+    LOG(LOGS_ERR, LOGF_Util, "Wrong permissions on %s", path);
+    return 0;
+  }
+
+  if (buf.st_uid != uid) {
+    LOG(LOGS_ERR, LOGF_Util, "Wrong owner of %s (%s != %d)", path, "UID", uid);
+    return 0;
+  }
+
+  if (buf.st_gid != gid) {
+    LOG(LOGS_ERR, LOGF_Util, "Wrong owner of %s (%s != %d)", path, "GID", gid);
+    return 0;
+  }
+
+  return 1;
+}

util.h

@@ -88,6 +88,8 @@ extern int UTI_CompareIPs(IPAddr *a, IPAddr *b, IPAddr *mask);
 
 extern void UTI_SockaddrToIPAndPort(struct sockaddr *sa, IPAddr *ip, unsigned short *port);
 extern int UTI_IPAndPortToSockaddr(IPAddr *ip, unsigned short port, struct sockaddr *sa);
+extern char *UTI_SockaddrToString(struct sockaddr *sa);
+extern const char *UTI_SockaddrFamilyToString(int family);
 
 extern char *UTI_TimeToLogForm(time_t t);
 
@@ -107,6 +109,9 @@ extern void UTI_Int64ToTimeval(NTP_int64 *src, struct timeval *dest);
 /* Check if time + offset is sane */
 extern int UTI_IsTimeOffsetSane(struct timeval *tv, double offset);
 
+/* Get 2 raised to power of a signed integer */
+extern double UTI_Log2ToDouble(int l);
+
 extern void UTI_TimevalNetworkToHost(Timeval *src, struct timeval *dest);
 extern void UTI_TimevalHostToNetwork(struct timeval *src, Timeval *dest);
 
@@ -124,11 +129,19 @@ extern int UTI_CheckNTPAuth(int hash_id, const unsigned char *key, int key_len,
 /* Decode password encoded in ASCII or HEX */
 extern int UTI_DecodePasswordFromText(char *key);
 
-#if defined (INLINE_UTILITIES)
-#define INLINE_STATIC inline static
-#include "util.c"
-#else
-#define INLINE_STATIC
-#endif /* defined (INLINE_UTILITIES) */
+extern int UTI_SetQuitSignalsHandler(void (*handler)(int));
+
+/* Get directory (as an allocated string) for a path */
+extern char *UTI_PathToDir(const char *path);
+
+/* Create a directory with a specified mode (umasked) and set its uid/gid.
+   Create also any parent directories that don't exist with mode 755 and
+   default uid/gid.  Returns 1 if created or already exists (even with
+   different mode/uid/gid), 0 otherwise. */
+extern int UTI_CreateDirAndParents(const char *path, mode_t mode, uid_t uid, gid_t gid);
+
+/* Check if a directory is secure.  It must not have other than the specified
+   permissions and its uid/gid must match the specified values. */
+extern int UTI_CheckDirPermissions(const char *path, mode_t perm, uid_t uid, gid_t gid);
 
 #endif /* GOT_UTIL_H */

wrap_adjtimex.c

@@ -1,204 +0,0 @@
-/*
-  chronyd/chronyc - Programs for keeping computer clocks accurate.
-
- **********************************************************************
- * Copyright (C) Richard P. Curnow  1997-2002
- * Copyright (C) Miroslav Lichvar  2011-2012, 2014
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- * 
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- * 
- **********************************************************************
-
-  =======================================================================
-
-  This is a wrapper around the Linux adjtimex system call.
-
-  */
-
-#include "config.h"
-
-#include "wrap_adjtimex.h"
-
-#include <sys/timex.h>
-
-/* Definitions used if missing in the system headers */
-#ifndef ADJ_TAI
-#define ADJ_TAI                 0x0080  /* set TAI offset */
-#endif
-#ifndef ADJ_SETOFFSET
-#define ADJ_SETOFFSET           0x0100  /* add 'time' to current time */
-#endif
-#ifndef ADJ_NANO
-#define ADJ_NANO                0x2000  /* select nanosecond resolution */
-#endif
-#ifndef ADJ_OFFSET_SS_READ
-#define ADJ_OFFSET_SS_READ      0xa001  /* read-only adjtime */
-#endif
-
-/* Frequency offset scale (shift) */
-#define SHIFT_USEC 16
-
-static int status = 0;
-
-int
-TMX_ResetOffset(void)
-{
-  struct timex txc;
-
-  /* Reset adjtime() offset */
-  txc.modes = ADJ_OFFSET_SINGLESHOT;
-  txc.offset = 0;
-  if (adjtimex(&txc) < 0)
-    return -1;
-
-  /* Reset PLL offset */
-  txc.modes = ADJ_OFFSET | ADJ_STATUS;
-  txc.status = STA_PLL;
-  txc.offset = 0;
-  if (adjtimex(&txc) < 0)
-    return -1;
-
-  /* Set status back */
-  txc.modes = ADJ_STATUS;
-  txc.status = status;
-  if (adjtimex(&txc) < 0)
-    return -1;
-
-  return 0;
-}
-
-int
-TMX_SetFrequency(double *freq, long tick)
-{
-  struct timex txc;
-  
-  txc.modes = ADJ_TICK | ADJ_FREQUENCY;
-
-  txc.freq = (long)(*freq * (double)(1 << SHIFT_USEC));
-  *freq = txc.freq / (double)(1 << SHIFT_USEC);
-  txc.tick = tick;
-
-  return adjtimex(&txc);
-}
-
-int
-TMX_GetFrequency(double *freq, long *tick)
-{
-  struct timex txc;
-  int result;
-  txc.modes = 0; /* pure read */
-  result = adjtimex(&txc);
-  *freq = txc.freq / (double)(1 << SHIFT_USEC);
-  *tick = txc.tick;
-  return result;
-}
-
-int
-TMX_SetLeap(int leap)
-{
-  struct timex txc;
-
-  status &= ~(STA_INS | STA_DEL);
-
-  if (leap > 0) {
-    status |= STA_INS;
-  } else if (leap < 0) {
-    status |= STA_DEL;
-  }
-  
-  txc.modes = ADJ_STATUS;
-  txc.status = status;
-
-  return adjtimex(&txc);
-}
-
-int
-TMX_GetLeap(int *leap)
-{
-  struct timex txc;
-
-  txc.modes = 0;
-  if (adjtimex(&txc) < 0)
-    return -1;
-
-  status &= ~(STA_INS | STA_DEL);
-  status |= txc.status & (STA_INS | STA_DEL);
-
-  if (status & STA_INS)
-    *leap = 1;
-  else if (status & STA_DEL)
-    *leap = -1;
-  else
-    *leap = 0;
-
-  return 0;
-}
-
-int TMX_SetSync(int sync, double est_error, double max_error)
-{
-  struct timex txc;
-
-  if (sync) {
-    status &= ~STA_UNSYNC;
-  } else {
-    status |= STA_UNSYNC;
-  }
-
-  txc.modes = ADJ_STATUS | ADJ_ESTERROR | ADJ_MAXERROR;
-  txc.status = status;
-  txc.esterror = est_error * 1.0e6;
-  txc.maxerror = max_error * 1.0e6;
-
-  return adjtimex(&txc);
-}
-
-int
-TMX_TestStepOffset(void)
-{
-  struct timex txc;
-
-  /* Zero maxerror and check it's reset to a maximum after ADJ_SETOFFSET.
-     This seems to be the only way how to verify that the kernel really
-     supports the ADJ_SETOFFSET mode as it doesn't return an error on unknown
-     mode. */
-
-  txc.modes = ADJ_MAXERROR;
-  txc.maxerror = 0;
-  if (adjtimex(&txc) < 0 || txc.maxerror != 0)
-    return -1;
-
-  txc.modes = ADJ_SETOFFSET | ADJ_NANO;
-  txc.time.tv_sec = 0;
-  txc.time.tv_usec = 0;
-  if (adjtimex(&txc) < 0 || txc.maxerror < 100000)
-    return -1;
-
-  return 0;
-}
-
-int
-TMX_ApplyStepOffset(double offset)
-{
-  struct timex txc;
-
-  txc.modes = ADJ_SETOFFSET | ADJ_NANO;
-  if (offset >= 0) {
-    txc.time.tv_sec = offset;
-  } else {
-    txc.time.tv_sec = offset - 1;
-  }
-  txc.time.tv_usec = 1.0e9 * (offset - txc.time.tv_sec);
-
-  return adjtimex(&txc);
-}

wrap_adjtimex.h

@@ -1,40 +0,0 @@
-/*
-  chronyd/chronyc - Programs for keeping computer clocks accurate.
-
- **********************************************************************
- * Copyright (C) Richard P. Curnow  1997-2002
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- * 
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- * 
- **********************************************************************
-
-  =======================================================================
-
-  The header file for the adjtimex wrapper
-  */
-
-#ifndef GOT_WRAP_ADJTIMEX_H
-#define GOT_WRAP_ADJTIMEX_H
-
-int TMX_ResetOffset(void);
-int TMX_SetFrequency(double *freq, long tick);
-int TMX_GetFrequency(double *freq, long *tick);
-int TMX_SetLeap(int leap);
-int TMX_GetLeap(int *leap);
-int TMX_SetSync(int sync, double est_error, double max_error);
-int TMX_TestStepOffset(void);
-int TMX_ApplyStepOffset(double offset);
-
-#endif  /* GOT_WRAP_ADJTIMEX_H */
-